GEBERIT 971.463.00.0 Option Illuminated Mirror User Guide
- June 12, 2024
- GEBERIT
Table of Contents
KURZANLEITUNG
NOTICE SUCCINTE
ISTRUZIONI BREVI
QUICK GUIDE
Technical data and conformity
Technical data
| Nominal voltage | 220–240 V AC |
|---|---|
| Mains frequency | 50/60 Hz |
| Protection degree | IP44 |
| Protection class | I |
| Energy efficiency class light source | F |
| Light colour | 3000 K |
Declaration of conformity
You can obtain a copy of the declaration of conformity from your responsible
Geberit sales company.
Getting to know your product
The product at a glance Figure 1: Geberit Option Plus illuminated mirror
- Mirror heating switch: on or off
- Light strip switch: on, off or dim
Operating concept
Switch operating functions on or off
-
Briefly press the touch sensor switch at the bottom on the right to switch the light on or off.
✓ The light switches on or off. -
Press and hold the touch sensor switch at the bottom on the right to dim the light. ✓ The light becomes brighter or darker.
✓ You can dim in the other direction by pressing the switch again. -
When the light is off, press the touch sensor switch at the bottom on the right for at least 4 seconds to switch off the orientation light. ✓ The orientation light switches off.
-
Briefly press the touch sensor switch at the bottom on the left to switch on the mirror heating.
✓ An indication light signals that the mirror heating is switched on.
Care instructions
You have selected a product with a highgrade surface. Please follow the care
instructions below.
The manufacturer does not assume any liability for product damage that arises
as a result of incorrect care and handling.
General care instructions
- Never use cleaning agents that contain chlorine or that are acidic or corrosive.
- Never use cleaning agents that are abrasive or may scratch the surface.
- Never use sharp or pointed objects when cleaning.
- Make sure that an efficient source of ventilation and an appropriate room temperature are present in your bathroom.
- Protect the surface from bleaching due to extreme light and sun exposure.
Care instructions for mirror surfaces
Please note the following when cleaning mirror surfaces:
- Use a damp chamois leather or a soft, lint-free cloth.
- Remove drops from the edges of mirror surfaces immediately.
Cleaning surfaces
- Clean the surfaces. Please follow the corresponding care instructions.
- Dry the surfaces with a soft, lint-free cloth.
Disposal
Dismantle product
The product may be dismantled by a trained electrician only.
Disposal of waste electrical and electronic equipment
The symbol of the crossed-out wheeled bin means that waste electrical and
electronic equipment (WEEE) must be disposed of separately and not with other
non-recyclable waste. End users are legally obliged to return old equipment to
public waste disposal authorities, distributors, or Geberit for proper
disposal. Many distributors of electrical and electronic equipment are obliged
to take back WEEE free of charge. Contact the responsible sales or service
company to return the WEEE to Geberit.
Used batteries and accumulators that are not enclosed within the old
equipment, as well as lamps that can be removed from the old equipment in a
non-destructive manner, must be separated from the old equipment before being
handed over to a disposal point.
If personal data is stored on the old equipment, end users themselves are
responsible for deleting it before handing it over to a disposal point.
Geberit International AG
Schachenstrasse 77, CH-8645 Jona
documentation@geberit.com
10697910667 © 09-2022
971.463.00.0(00)
www.geberit.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>