iLIVE IAHB53 3143-01 Bluetooth Headphones User Guide
- June 12, 2024
- iLive
Table of Contents
iLIVE IAHB53 3143-01 Bluetooth Headphones
Features
- Bluetooth 5.3 – range 33 ft.
- Built-in microphone
- 3.5mm Aux In
- Adjustable headband
- Folds for travel
- On-ear controls
- Rechargeable battery
- Playback up to 7 hours at 50% volume
Includes
- USB-C to USB charging cable
- 3.5mm Cable
Controls and Function
Charging the Battery
To charge the battery, use the USB-C to USB cable (included), to connect to
the USB port of a powered-on computer or a UL-certified USB power adaptor (not
included). Charge fully before use. The initial charge time is approximately 2
hours.
| STATUS | INDICATOR |
|---|---|
| Power On | Flashing blue light |
| Charging | Solid red light |
| Charging Complete | Light OFF |
| Pairing | Flashing red / blue light |
| Pairing Complete | Flashing blue light |
Pairing Bluetooth
- Power on the headphones. The headphones default to Bluetooth Mode and are ready to pair automatically. When pairing, stay within 3 feet of the Bluetooth device.
- On your Bluetooth device, search for nearby devices in your Bluetooth settings and select IAHB53. When successfully connected to your Bluetooth device, a voice prompt will announce the Bluetooth connection.
- Audio played through the connected Bluetooth device will now be heard through the headphones. Use the controls on the connected device to play audio and adjust the volume.
Note: To pair to a different Bluetooth device, press and hold the Bluetooth Pairing button to manually enter Pairing Mode.
Previously Connected Devices
- The headphones can remember multiple Bluetooth devices and will always try to reconnect to the last device used.
- To reconnect to a different device, turn off Bluetooth on unwanted devices, then access the Bluetooth settings menu on the device you wish to use and select IAHB53.
Aux In
Aux mode will function even if the headphones are not powered on. To conserve
battery power, the headphones will automatically power off when using Aux In.
Requires a 3.5mm audio cable (included).
- Connect a 3.5mm audio cable to the Aux In on the headphones and the audio output on an audio device.
- Use the controls on the connected device to select and play audio. Customer Support
- Customer Service: 1-888-999-4215
- Email Support: [email protected]
- Email Parts: [email protected]
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.com
Copyright © 2023 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice.
FCC Warnings
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Additional Warnings
- WARNING: To prevent fire or shock hazards, do not expose this unit to rain or moisture.
- WARNING : Where the mains plug or an appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable.
- Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state and local guidelines. They should never be disposed of in normal household waste, and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area.
- This product meets and complies with all Federal regulations.
- To avoid hearing damage, make sure that the volume on your music player is turned down before connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume until you reach a comfortable listening level.
WARNING: This product can expose you to chemicals including lead, which
is known to the State of California to cause cancer and birth defects or other
reproductive harm. For more information go to
www.P65Warnings.ca.gov.
This product meets and complies with required Federal product guidelines.