iComTech IGS-C1080 Industrial Gigabit Ethernet Switch Instruction Manual
- June 12, 2024
- iComTech
Table of Contents
iComTech IGS-C1080 Industrial Gigabit Ethernet Switch
Product Information
The IGS-C1050/IGS-C1080 is an industrial 5-port/8-port unmanaged Gigabit Ethernet switch series designed for rugged excellence. It supports 5 x 10/100/1000Base-T(X) ports or 8 x 10/100/1000Base-T(X) RJ45 connectors. With a wide operating temperature range from -40°C to 75°C, it is suitable for various operating environments. This switch is highly reliable and an excellent choice for Ethernet applications.
Features:
- Designed for Rugged Excellence V1.0 Nov, 2021
- Supports 5 x 10/100/1000Base-T(X) ports or 8 x 10/100/1000Base-T(X) RJ45 connectors
Specifications:
| ORing Switch Model | IGS-C1050 | IGS-C1080 |
|---|---|---|
| Physical Ports | 5 | 8 |
| Ethernet Standards | IEEE 802.3 for 10Base-T |
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control| IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
MAC Table| 2K| 4K
Packet Buffer Size| 4Mbits| 1.5Mbits
Processing| Store-and-Forward| Store-and-Forward
DIP Switch| Power Single Input| Power Single Input
Power| 12~48VDC on 2-pin terminal block.| Present
Overload Current Protection| Present| Present
Reverse Polarity Protection| N/A| N/A
Physical Characteristic| N/A| N/A
Enclosure Dimension (W x H x D)| N/A| N/A
Environmental Storage Temperature| -40 to 85°C| -40 to 75°C
Operating Temperature| -40 to 85°C| -40 to 75°C
Operating Humidity| 5% to 95% Non-condensing| 5% to 95% Non-condensing
Regulatory Approvals|
- CE EMC (EN 55032, EN 55035), FCC Part 15 B
- EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC
- Part 15 B class
- A EN 55035 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS), IEC/EN
- 61000-4-4 (EFT), IEC/EN 61000-4-5 (Surge), IEC/EN 61000-4-6 (CS),
- IEC/EN 61000-4-8(PFMF))
- EN62368-1
|
- CE EMC (EN 55032, EN 55035), FCC Part 15 B
- EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15 B class
- A EN 55035 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS), IEC/EN 61000-4-4 (EFT),
- IEC/EN 61000-4-5 (Surge), IEC/EN 61000-4-6 (CS),
- IEC/EN 61000-4-8(PFMF))
- EN62368-1
Warranty| 5 years| 5 years
Ordering Information:
| Model Name | IGS-C1050 | IGS-C1080 |
|---|---|---|
| Description | Industrial 5-port unmanaged Gigabit Ethernet switch with | |
| 5×10/100/1000Base-T(X) | Industrial 8-port unmanaged Gigabit Ethernet switch |
with
8×10/100/1000Base-T(X)
Product Usage Instructions
To use the IGS-C1050/IGS-C1080 industrial Ethernet switch, follow these steps:
- Choose the appropriate model based on the number of ports required. The IGS-C1050 has 5 ports, while the IGS-C1080 has 8 ports.
- Ensure that the switch is placed in a suitable operating environment with a temperature range of -40°C to 75°C.
- Connect the power supply to the switch using a 12~48VDC input on the 2-pin terminal block.
- Make sure the power input is protected against overload currents.
- Check the polarity of the power input to prevent reverse polarity issues.
- Connect the Ethernet devices to the appropriate ports using RJ45 connectors.
- The switch supports IEEE 802.3 standards for 10Base-T, 100Base-TX, and 1000Base-T. Ensure that the connected devices are compatible with these standards.
- Verify that the switch is operating within the specified temperature and humidity range.
- Monitor the switch for any broadcast storms and enable Quality of Service (QoS) if required.
- Refer to the user manual for any additional configuration or troubleshooting steps.
Always refer to the product manual for detailed instructions and specifications, as they are subject to change without notice.
Features
- Supports 5 x 10/100/1000Base-T(X) ports or 8 x 10/100/1000Base-T(X)，RJ45 connector
- Compact size for easy installation
- QoS supported to process critical data in heavy traffic
- IP40 protection class
- -40 to 75°C wide operating temperature range
- DIN-Rail mounting enabled
Introduction
IGS-C1050 /IGS-C1080 series are unmanaged gigabit Ethernet switches with 5 x 10/100/1000Base-T(X) ports or 8 x10/100/1000Base-T(X) RJ45 ports. In addition, the wide operating temperature range from -40oC to 75oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for Ethernet application.
Dimension
IGS-C1050
IGS-C1080
Specifications
| ORing Switch Model | IGS-C1050 | IGS-C1080 |
|---|
Physical Ports
10/100/1000 Base-T(X) Ports in
RJ45 Auto MDI/MDIX
| 5| 8
Technology
Ethernet Standards|
- IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T
- IEEE 802.3x for Flow control
MAC Table| 2K| 4K
Packet Buffer Size| 4Mbits| 1.5Mbits
Processing| Store-and-Forward
DIP Switch| Quality of Service (QoS), Broadcast Storm Protection (BSP)
Power
Single Input Power| 12~48VDC on 2-pin terminal block.
Overload Current Protection| Present
Reverse Polarity Protection| Present
Physical Characteristic
Enclosure| IP-40
Dimension (W x H x D)| 26× 103× 64 mm| 43.5 × 103 × 64mm
Environmental|
Storage Temperature| -40 to 85oC
Operating Temperature| -40 to 75oC
Operating Humidity| 5% to 95% Non-condensing
Regulatory approvals
EMC| CE EMC (EN 55032, EN 55035), FCC Part 15 B
EMI| EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15 B class A
EMS|
- EN 55035 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS), IEC/EN 61000-4-4 (EFT),
- IEC/EN 61000- 4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8(PFMF))
Safety| EN62368-1
Warranty| 5 years
Ordering Information
| Available Model | Model Name | Description |
|---|---|---|
| IGS-C1050 | Industrial 5-port unmanaged Gigabit Ethernet switch with |
5×10/100/1000Base-T(X)
IGS-C1080| Industrial 8-port unmanaged Gigabit Ethernet switch with
8×10/100/1000Base-T(X)
- All specifications are subject to change without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>