ENGWE W3431 4 Wheel Powered Mobility Scooters User Guide
- June 12, 2024
- ENGWE
Table of Contents
ENGWE W3431 4 Wheel Powered Mobility Scooters
INSTALLATION INSTRUCTIONS
-
Special Key: The keys of this mobility scooter have a different appearance from the regular keys, also included in the accessory bag.
-
Upgrade Bolts & Nut: This batch of mobility scooters has been equipped with a set of M8 x 60mm Bolt & Nut, instead of the knob of the last batch, locking more durable without any risk of loose.
-
The Charger LED Signal From the Above to the Below:
First Light: The charger in plug or battery full charge. Second Light: The battery charging.
Third Light: The charger is in electricity and running regularly.
-
The Switch Behind the Chair: Before turn on with the key, please pull the switch to the “D Model”. If it is on the “N Model”, it won’t run but only “beep – beep” again and again.
-
The Console: 1. Key Hole 2. Battery Power Display 3. Speed Adjustment
-
The Seat Pole & Battery Assembly: Lock down the seat with the bolt and nut, and please tighten the battery knob in the horizontal, to make sure that the battery pack is secure.
-
Notice: Before the first use, please ensure that the battery is within the full charge.
-
At last, ensure the switch has been pushed to the “D Model”, and while you insert the key, you hear a “beep”, and the battery power display lighting on, that is mean you make it.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>