GAS AUDIO POWER MAD T2-254 Well Playing Treble User Manual

**GAS AUDIO POWER MAD T2-254 Speaker User Manual

**

WE PLAY LOUD

We know what you want. You want it LOUD, and that is exactly what we do, what we live for. Vibrations, gut-punches and straight up loud music – that’s what makes us tick. We won’t dress up in fancy words or claim to be something we’re not. We are the NO BULLSIPT car audio brand!

Every single product with the GAS logo on it is born out of passion, the same that has driven us for two generations and that ‘will keep us rolling up to your neighborhood, winning and pushing the limits for many generations to come!

It’s up to you to choose your own level of loud, and if you dén’t like what we do that’s OK. You are welcome back when you’ve had your first true GAS experience. We don’t exclude, we don’t judge and we do not make up any excuses for who we are.

We are GAS and we are proud to be LOUD!

SAFETY

PLAY LOUD & SAFE. Read through this information, follow the instructions and save the manual for future usage and reference. 

Make sure to pay attention to the instructions when you see this symbol:

Do not expose the wiring to your new speaker to excessive damp or moisture. If the speaker’s wiring is exposed it might result in electric failure, shock or damage to the product. Servicing is required when the product has been damaged in any way and/or doesn’t operate normally. Refer all servicing to qualified service personnel only.

Keep the cables inside the vehicle separate from sharp edges or components that may be affected or take damage. Follow the recommended cable sizes andalways use high quality cables and accessories. Evenif you’re eager to put the speakers to use – take no shortcuts when installing the cables, make sure thatall connectors are protected and secured.

Do not drill any holes without checking what lies beneath, and don’t cut anything without making sure that no important components risk being damaged

There is a first time for everything, if you need help – ask a friend or contact yourlocal GAS AUDIO POWER dealer/installer.

We wantyou to experience your product’s MAD sound, but we don’t want youto injure yourself or others. Use common sense, respect high pressure levels and volume, and follow your local laws and regulations.

UNPACKING

Unboxing your new MAD product is an experience, make sure that the tweeters and all the accessories are included in the packaging:

• Tweeters (2pcs)

• Tweeter houses (6pes)

• Crossovers (2pcs)

• Tweeter cables (2pes)

• Glue pads (2pcs)

• V-type clips (4pcs)

• Screws (4pes)

• Manual

DIMENSIONS

SPECIFICATIONS

Below you’ll find the specifications that has been checked and tested in our workshop. The specified sensitivity isn’t directly connected with the sound pressure in the vehicle, and shouldn’t be used as the sole indicator for comparison with other tweeters.

  MAD 72-254 CROSSOVER
Type| High pass
Slope| 6dB
Cut off| 4500Hz

FEATURES

The MAD tweeter is made to be LOUD and last for years to come. We want to help you and your vehicle to be as LOUD as possible. We’ve made sure that is the case by using innovative and groundbreaking techniques that increase durability.

YOUR CAR DESERVES BETTER
There’s nothing better than replacing that old dusty wannabe speaker that’s been hiding behind your dash. Did your old tweeters break ‘cause they couldn’t handle your level of LOUD? Then it’s time for an upgrade. The T2 series tweeter is ready for you. Be proud, be loud, be MAD!
CRISP AND CLEAN
Just the way you like it, just the way your car wants it – uncomplicated, LOUD and made to fit like a glove. For clean and clear highs, the T2-254 is a 25mm silk dome tweeter with a Neodymium magnet and an inline crossover. You deserve better sound in your car and a pair of new tweeters will make sure you’re heard.
LOUD UPGRADES FIT EVERYWHERE
With the T2 series tweeter we’ve included three different types of housing for the tweeters, so you can choose the tweeter location most suitable for your ride and its sound system. Depending on the location, the housing might vary. Be creative. Make sure to aim the tweeters, so these reach your head/ears for great results. Choose your tweeter location without holding back, LOUD upgrades fit everywhere!

HOW TO

INSTALL TWEETER
Before installing your brand new tweeters, make sure you have everything you need. Have the right tools ready, and make sure you have the know- how/skills to perform the installation properly. Preparation and knowledge is crucial!

The T2 tweeter also include crossovers. The crossover should be wired between a midrange woofer and the tweeter, it makes sure tha tweeter plays on the right part of the LOUD spectrum.

Two @4 Ohm speakers connected with on amplifier @4 Ohm
It is important to know the limits of your amplifier. Be sure to connect your sound system with a suitable impedance to optimize your sound system.

Two @4 Ohm speakers connected directly to a stereo @4 Ohm

TWEETER PLACEMENT
Now that you know how to connect your tweeters, you need to decide where to put it. You will most likely have one or two possible locations to put the tweeters depending on make and model. This is where the fun begins!

1. FRONT DOORS}
   The front right and left doors are typical positions for woofers, but in some models youll find tweeters here as well that is complementing the woofers.

2. BACK DOORS
   ‘Some car models out there have a 2-way system in the back. If your car’s on the more luxu- rious side of the spectrum, you might find a tweeter in both the front and rear.

3. DASH
   The tweeter’s usually placed here. Do you see a small grille around the left & right end of the dash? Awesome! Put your new tweeter here. If your car’s older, you might not have a tweeter in your dash. No worries! Use the ANGLED SURFACE MOUNTING and you’re good.

4. A-pillar
   In some cars, the tweeter is located in the A-pillar. Lucky you! This is a great location to put a tweeter, since its placed higher up and directly aimed at your ears. Place the tweeter with the ANGLED SURFACE MOUNTING and enjoy great sound!

TWEETER MOUNTING OPTIONS
With the T1 series tweeter we’ve included three different types of housing for the tweeters, so you can choose the tweeter location most suitable for your ride and its sound system.

• FLUSHMOUNTING

• SURFACE MOUNTING

• ANGLED SURFACE MOUNTIN

Depending on the location, the housing might vary. If you want to change your OEM tweeters, use the FLUSH MOUNTING. Do you intend to put the K1 series tweeter on your dash? Great! Make sure to use the ANGLED SURFACE MOUNTING. The SURFACE MOUNTING has different exciting possibilities. Be creative. Make sure to aim the tweeters, so the sound reaches your head/ears for great results!

TROUBLESHOOTING

Check the tweeters to make sure they’re not damaged. If your tweeters don’t get any power, the most common issue is either in the wiring o in the amplifier. Use a multimeter to measure the amplifiers voltage on the +12V terminal and the remote signal terminal. Use a multimeter to make sure that you have a negative ground connection. Check the built-in fuse (if theres one) on the amplifier. If there’s no  power coming through – control the fuse on the power cable. If its intact – make a full check of the wiring to ensure cable integrity.

Check all the speakers connected to your sound system. Check all the speaker cables and all the signal cables. Check your head unit to make sure no settings are limiting the amplifier’s functions or the speakers. When all of the above has been tested/looked over, and all is as it should be but there’s still no sound, consult your local GAS AUDIO POWER dealerinstaller.

UNWANTED NOISE
Start by looking over the speakers in the sound system so there is no damage or connection issue with the wiring. Make sure that your signal cables or speaker cables aren’t too close to the power cables. Check your amplifier’s grounding point and make sure that the surface s clean. When all of the above has been tested/loo- ked over, and the unwanted noise does not vanish, consult your local GAS AUDIO POWER dealer/installer.

DISTORTION
Start by looking over the speakers in the sound system so there’s no damage or connection issue with the wiring. Check the speaker cables to make sure that the polarity isn’t reversed on one channel. Check the settings on the amplifier, make sure that the gain/level is set according to the amplifier’s instructions. If your amplifier has a boost function, turn it down or turn it off.

WARRANTY & DISPOSAL

This product is covered by warranty, depending on the conditions in the country where it’s sold. If the speakers are returned for service, please include the original dated receipt (or a copy) with the product. Make sure that the speakers are packaged properly and secured, preferably in its original packaging.

‘The crossed-out wheelie bin symbol means that the product,literature and packaging included must be taken to separate collection at the end of their ‘workinglife. Don’t dispose of these products as unsorted municipal waste take them for recycling. For info on your nearest recycling point, check with your local waste authority.

This product has been granted with the CE certification mark to show that c € the product follows the health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).

GAS Audio Power products comply with the relevant Rohus provisions of the RoHS Directive for the European h Union. In common with all Electrical and Electronic compliant | equipment (eEE) the product shouldn’t be disposed of as household waste. Alternative arrangements may apply in other jurisdictions. ****

GAS Audio Power is a global partner of the European * EIVIIVLA e e resection o orgosoton o eupnea mobile media association f0CUS on promoting the custom made mobile media GLOBAL PARTNER installations to consumers.

THE GAS WORD

You’ve entered the world of GAS. We aim to please, and we’ve made sure to have products made for you. No matter what stage of the LOUD- addiction you might find yourself in, there is a GAS product to fill your need.

** Just starting out? The MAD series is made to play LOUD** and to be the express lane to ano bullsh!t sound system that will make sure everyone can hear you coming!

**The MAX series holds products made to deserve the center stage. Powerful, heavy duty and de- signed to be noticed. We made NO COMPROMISES** because we know that you wouldn’t accept it.

** The CMP series has been developed for the crucial seconds when the dB-counter starts to tick. All CMP** products have hand-picked, high quality, COMPETITION GRADE components and they are specially designed to withstand an awesome amount of power.

THANKS FOR JOINING GAS AUDIO POWER!

GAS AUDID POWER and SHAKY are registered trademarks by Winn Scandinavia AB and s protected by relevant laws and jurisdictions such as Copyright and Trademark laws.
Winn Scandinavia AB | Elementvigen 15, 7022 Grebro, Sweden | wwwwinnscandinavia.com
Winn Scandinavia AB reserves for possible typos, factualor numeric erfors that may have been printed on any products, package designs, user manuals and/or other Included accessories.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>