Electrolux EW6T5227F6 Washing Machine User Manual
- June 12, 2024
- Electrolux
Table of Contents
EW6T5227F6 Washing Machine
Product Information
The Electrolux EW6T5227F5 is a washing machine designed with
decades of professional experience and innovation. It is
ingeniously designed to provide great results every time you use
it. With low water, energy, and detergent consumption, this washing
machine cares for your fabrics while meeting modern requirements
for effective laundry treatment.
The washing machine features special features that enhance its
performance, including a control panel, lid with handle, drain pump
filter, lever for easy movement, feet for leveling, inlet hose,
drain hose, mains cable, transit bolts, and a rating plate. The
rating plate provides important information such as the model name,
product number, electrical ratings, and serial number.
For better customer care and service, always use original spare
parts. When contacting the Authorised Service Centre, make sure to
have the following data available: Model, PNC, and Serial Number.
This information can be found on the rating plate.
For safety reasons, carefully read and follow the supplied
instructions before installing and using the appliance. Keep the
instructions in a safe and accessible location for future
reference.
For more information, usage advice, troubleshooting, service and
repair information, visit the Electrolux website at
www.electrolux.com/support.
To register your product for better service, visit
www.registerelectrolux.com.
You can also buy accessories, consumables, and original spare parts
for your appliance at
www.electrolux.com/shop.
Product Usage Instructions
-
Installation: The installation of the washing
machine must comply with relevant national regulations. -
Electrical connection: To avoid the risk of
fire and electric shock, carefully follow the electrical connection
instructions provided. -
Water connection: Follow the water connection
instructions to ensure proper usage and prevent the risk of injury,
electric shock, fire, burns, or damage to the appliance. -
Use: Follow the usage instructions to get the
best results from your washing machine. Be cautious to avoid any
potential risks. -
Service: If you require service or maintenance
for your washing machine, contact the Authorised Service Centre
using the Model, PNC, and Serial Number information available on
the rating plate. -
Disposal: When disposing of the washing
machine, follow the disposal instructions to prevent the risk of
injury or suffocation.
Note: The technical data provided includes information on
dimensions, electrical connection, level of protection against
solid particles and moisture, water supply pressure, maximum load,
and spin speed. Refer to this information as needed.
EW6T5227F5
EN Washing Machine
User Manual
2 www.electrolux.com
CONTENTS
1. SAFETY INFORMATION…………………………………………………………………………3 2. SAFETY
INSTRUCTIONS……………………………………………………………………….4 3. PRODUCT
DESCRIPTION…………………………………………………………………….. 6 4. TECHNICAL
DATA…………………………………………………………………………………8 5.
INSTALLATION…………………………………………………………………………………….. 8 6. CONTROL
PANEL………………………………………………………………………………. 11 7. DIAL AND
BUTTONS…………………………………………………………………………… 12 8.
PROGRAMMES………………………………………………………………………………….. 14 9.
SETTINGS…………………………………………………………………………………………..19 10. BEFORE FIRST
USE…………………………………………………………………………. 19 11. DAILY
USE……………………………………………………………………………………….. 20 12. HINTS AND
TIPS………………………………………………………………………………. 24 13. CARE AND
CLEANING……………………………………………………………………….26 14.
TROUBLESHOOTING…………………………………………………………………………29 15. CONSUMPTION
VALUES……………………………………………………………………32 16. QUICK
GUIDE……………………………………………………………………………………33 17. ENVIRONMENTAL
CONCERNS…………………………………………………………. 35
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that
brings with it decades of professional experience and innovation. Ingenious
and stylish, it has been designed with you in mind. So whenever you use it,
you can be safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux. Visit our website to:
Get usage advice, brochures, trouble shooter, service and repair information:
www.electrolux.com/support
Register your product for better service: www.registerelectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts. When contacting our Authorised Service
Centre, ensure that you have the following data available: Model, PNC, Serial
Number. The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
ENGLISH 3
1. SAFETY INFORMATION Before the installation and use of the appliance,
carefully read the supplied instructions. The manufacturer is not responsible
for any injuries or damage that are the result of incorrect installation or
usage. Always keep the instructions in a safe and accessible location for
future reference.
1.1 Children and vulnerable people safety · This appliance can be used by
children aged from 8
years and above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning the use of the appliance in a safe way
and understand the hazards involved. · Children between 3 and 8 years of age
and persons with very extensive and complex disabilities shall be kept away
from the appliance unless continuously supervised. · Children of less than 3
years of age should be kept away from the appliance unless continuously
supervised. · Children should be supervised to ensure that they do not play
with the appliance. · Keep all packaging away from children and dispose of it
appropriately. · Keep detergents away from children. · Keep children and pets
away from the appliance when the door is open. · If the appliance has a child
safety device, it should be activated. · Children shall not carry out cleaning
and user maintenance of the appliance without supervision.
1.2 General Safety · Do not change the specification of this appliance.
4 www.electrolux.com
· This appliance is intended to be used in household and similar applications
such as: staff kitchen areas in shops, offices and other working
environments; by clients in hotels, motels, bed & breakfast and other
residential type environments; areas for communal use in blocks of flats or
in launderettes.
· The appliance maximum load is 7 kg. Do not exceed the maximum load of each
programme (refer to the “Programmes” chapter).
· The operating water pressure at the water entry point from the outlet
connection must be between 0.5 bar (0.05 MPa) and 10 bar (1.0 MPa).
· The ventilation opening in the base must not be covered by a carpet, mat, or
any floor covering.
· The appliance must be connected to the water mains using the new supplied
hose sets, or other new hose sets supplied by the Authorised Service Centre.
· Old hose sets must not be reused. · If the mains power supply cable is
damaged, it must
be replaced by the manufacturer, its Authorised Service Centre or similarly
qualified persons to avoid an electrical hazard. · Before any maintenance
operation, deactivate the appliance and disconnect the mains plug from the
socket. · Do not use high pressure water sprays and/or steam to clean the
appliance. · Clean the appliance with a moist cloth. Use only neutral
detergents. Do not use abrasive products, abrasive cleaning pads, solvents or
metal objects.
2. SAFETY INSTRUCTIONS
2.1 Installation
The installation must comply with relevant national regulations.
· Remove all the packaging and the transit bolts including rubber bush with
plastic spacer.
· Keep the transit bolts in a safe place. If the appliance is to be moved in
the future they must be reattached to lock
the drum to prevent an internal damage. · Always take care when moving the
appliance as it is heavy. Always use safety gloves and enclosed footwear. ·
Follow the installation instructions supplied with the appliance. · Do not
install or use a damaged appliance. · Do not install or use the appliance
where the temperature can be less than 0°C or where it is exposed to the
weather. · The floor area on which the appliance is to be installed must be
flat, stable, heat resistant and clean. · Make sure that there is air
circulation between the appliance and the floor. · When the appliance is in
its permanent position, check if it is levelled correctly with the aid of a
spirit level. If it is not, adjust the feet accordingly. · Do not install the
appliance directly above a floor drain. · Do not spray water on the appliance
and do not expose it to excessive humidity. · Do not install the appliance
where the appliance lid cannot be fully opened. · Do not put a closed
container to collect possible water leakage under the appliance. Contact the
Authorised Service Centre to ensure which accessories can be used.
2.2 Electrical connection
WARNING! Risk of fire and electric shock.
· WARNING: This appliance is designed to be installed / connected to a
grounding connection in the building.
· Always use a correctly installed shockproof socket.
· Make sure that the parameters on the rating plate are compatible with the
electrical ratings of the mains power supply.
· Do not use multi-plug adapters and extension cables.
· Make sure not to cause damage to the mains plug and to the mains
ENGLISH 5
cable. Should the mains cable need to be replaced, this must be carried out by
our Authorised Service Centre. · Connect the mains plug to the mains socket
only at the end of the installation. Make sure that there is access to the
mains plug after the installation. · Do not touch the mains cable or the mains
plug with wet hands. · Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
2.3 Water connection
· The inlet water shall not exceed 25 °C.
· Do not cause damage to the water hoses.
· Before connection to new pipes, pipes not used for a long time, where repair
work has been carried out or new devices fitted (water meters, etc.), let the
water flow until it is clean and clear.
· Ensure that there are no visible water leaks during and after the first use
of the appliance.
· Do not use an extension hose if the inlet hose is too short. Contact the
Authorised Service Centre for the replacement of the inlet hose.
· When unpacking the appliance, It is possible to see water flowing from the
drain hose. This is due to the testing of the appliance with the use of water
in the factory.
· You can extend the drain hose to maximum 400 cm. Contact the Authorised
Service Centre for the other drain hose and the extension.
· Make sure that there is access to the tap after the installation.
2.4 Use
WARNING! Risk of injury, electric shock, fire, burns or damage to the
appliance.
· Follow the safety instructions on the detergent packaging.
· Do not put flammable products or items that are wet with flammable products
in, near or on the appliance.
6 www.electrolux.com
· Do not wash fabrics which are heavily soiled with oil, grease or other
greasy substances. It can damage rubber parts of the washing machine. Prewash
such fabrics by hand before loading them into the washing machine.
· Make sure that all metal objects are removed from the laundry.
2.5 Service
· To repair the appliance contact the Authorised Service Centre. Use original
spare parts only.
· Please note that self-repair or nonprofessional repair can have safety
consequences and might void the guarantee.
· The following spare parts will be available for 10 years after the model has
been discontinued: motor and motor brushes, transmission between motor and
drum, pumps, shock absorbers and springs, washing drum, drum spider and
related ball bearings, heaters and heating elements, including heat pumps,
piping and related equipment including hoses, valves, filters and aquastops,
printed circuit boards, electronic displays, pressure switches, thermostats
and sensors, software and firmware including reset software, door, door hinge
and seals, other seals, door locking assembly, plastic peripherals
3. PRODUCT DESCRIPTION
3.1 Special features
Your new washing machine meets all modern requirements for an effective
treatment of laundry with low water, energy and detergent consumption and will
care for fabrics.
· Thanks to the Soft Plus option, the fabric softener is uniformly spread out
in the laundry and deeply penetrates
such as detergent dispensers. Please note that some of these spare parts are
only available to professional repairers, and that not all spare parts are
relevant for all models. · Concerning the lamp(s) inside this product and
spare part lamps sold separately: These lamps are intended to withstand
extreme physical conditions in household appliances, such as temperature,
vibration, humidity, or are intended to signal information about the
operational status of the appliance. They are not intended to be used in other
applications and are not suitable for household room illumination.
2.6 Disposal
WARNING! Risk of injury or suffocation.
· Disconnect the appliance from the mains electrical and water supplies.
· Cut off the mains electrical cable close to the appliance and dispose of it.
· Remove the door catch to prevent children or pets from becoming trapped in
the drum.
· Dispose of the appliance in accordance with local requirements for the
disposal of Waste Electrical and Electronic Equipment (WEEE).
the fabric fibres favouring a perfect softness. · The SensiCare System
automatically adjusts the programme duration to the laundry in the drum to
achieve perfect washing results in the minimum possible time. Read the
paragraph “The SensiCare System load detection ” for more details.
3.2 Appliance overview
1
2
3
ENGLISH 7
7 8 9
4 5
6 6
10 11 12
1 Control panel 2 Lid 3 Lid handle 4 Drain pump filter 5 Lever to move the appliance 6 Feet for levelling the appliance 7 Inlet hose
8 Drain hose 9 Mains cable 10 Transit bolts 11 Hose support 12 Rating plate
Information for register product.
The rating plate reports the model name (A) , product number (B), electrical ratings (C) and serial number (D).
A
B Mod. xxxxxxxxx
Prod.No. 910000000 00
C
000V ~ 00Hz 0000 W
D
00A
00000000
The info label reports the model name (A), product number (B ) and serial
number (C).
A B C
8 www.electrolux.com
4. TECHNICAL DATA
Dimension
Width/ Height/ Total depth 39,7 cm /90,8 cm /59,9 cm
Electrical connection
Voltage Overall power Fuse Frequency
230 V 2200 W 10 A 50 Hz
Level of protection against ingress of solid particles and moisture ensured by the protective cover, except where the low voltage equipment has no protection against moisture
IPX4
Water supply pressure
Minimum Maximum
0.5 bar (0.05 MPa) 10 bar (1.0 MPa)
Water supply 1)
Cold water
Maximum Load
Cotton
7 kg
Spin Speed
Maximum spin speed
1151 rpm
- Connect the water inlet hose to a water tap with a 3/4” thread.
5. INSTALLATION
WARNING! Refer to Safety chapters.
5.1 Unpacking and positioning
1
2
2 1
2 1
ENGLISH 9
We recommend that you keep the packaging and the transit bolts for any
transport of the appliance.
Adjust the appliance correctly to prevent vibration, noise and movement of the
appliance when it operates.
WARNING! Do not put cardboard, wood or equivalent materials below the
appliance feet to adjust the level.
5.2 The inlet hose
0.3-10 bar
FI
1/2″
3/4″
SE
3/4″
NO
3/4″
DK
Accessories delivered with the appliance may vary depending on the model.
Make sure there is no damage to hoses and there are no leaks from the
couplings. Do not use an extension hose if the inlet hose is too short.
Contact the service centre for a replacement inlet hose.
90O
10 www.electrolux.com
5.3 Water drainage
min.600 mm max.1000 mm
The drain hose should stay at a height of no less than 600 mm and not more than 1000 mm. You can extend the drain hose to maximum 4000 mm. Contact the authorised service centre for the other drain hose and the extension.
5.4 Electrical connection
At the end of installation you can connect the mains plug to the mains socket.
The rating plate and the ‘Technical Data’ chapter indicate the necessary
electrical ratings. Make sure that they are compatible with the mains power
supply.
Check that your domestic electrical installation can take the maximum load
required, also taking into account any other appliances in use.
Connect the appliance to an earthed socket.
The power supply cable must be easily accessible after installing the
appliance.
For any electrical work required to install this appliance, contact our
Authorised Service Centre.
The manufacturer does not accept any responsibility for damage or injury
through failure to comply with the above safety precaution.
6. CONTROL PANEL
6.1 Control panel description
1
ENGLISH 11 2 34 5
11 10 9
876
1 Programme dial 2 Display 3 Ajastin touch button 4 Time Manager touch button
5 Aloita/Keskeytä touch button 6 Soft Plus touch button 7 Lisähuuhtelu touch
button 8 Esipesu touch button
6.2 Display
AB
9 Linkous reduction options touch button · No Spin option · Rinse Hold option
· Hiljainen option
10 Päällä/Pois push button 11 Lämpötila touch button
C
D
G
F
E
A
Lid locked indicator.
12 www.electrolux.com
B
Delay start indicator.
C
The digital indicator can show:
· Programme duration (e. g. ).
· Delay time (e. g. ).
· Cycle end (
).
· Warning code (e.g.
).
D
Time Manager bars level indicator.
E
Drum clean indicator.
F
Child safety lock indicator.
G
Add garments indicator. Illuminates at the beginning of
the Wash phase, while the user can still pause the appli-
ance and add more laundry.
7. DIAL AND BUTTONS
7.1 Introduction
The options/functions are not available with all washing programmes. Check the
compatibility between options/functions and washing programmes in the
“Programme Chart”. An option/function can exclude another one, in this case
the appliance doesn’t allow you to set incompatible options/ functions.
7.2 Päällä/Pois
Press this button for a few seconds to activate or deactivate the appliance.
Two different tunes sound while switching the appliance on or off.
As the Stand-by function automatically deactivates the appliance after several
minutes to reduce the energy consumption, you may need to activate the
appliance again.
For more details, refer to Stand-by paragraph in Daily Use chapter.
7.3 Lämpötila
When you select a washing programme, the appliance automatically proposes a
default temperature.
The indicator Kylmä = cold water.
The indicator of the set temperature comes on.
7.4 Linkous
When you set a programme, the appliance automatically sets the maximum spin
speed allowed except programme Denim.
Additional spin options:
· No Spin . The related indicator comes on. Set this option to deactivate all
spin phases. The appliance performs only the draining phase of the selected
washing programme. Set this option for very delicate fabrics. The rinse phase
uses more water for some washing programmes
· Rinse Hold . The related indicator comes on. The final spin is not
performed. The water of the last rinse is not drained out to prevent the
fabrics from
creasing. The washing programme ends with water in the drum. The lid stays
locked and the drum turns regularly to reduce creasing. You must drain the
water to unlock the lid.
If you touch the Aloita/Keskeytä button, the appliance performs the spinning
phase and drains the water.
· Hiljainen . The related indicator comes on. The intermediate and the final
spinning phases are suppressed and the programme ends with water in the drum.
This helps to reduce creasing. The lid stays locked. The drum turns regularly
to reduce creasing. You must drain the water to unlock the lid. As the
programme is very quiet, it is suitable for use at night time when cheaper
electricity tariffs are available. In some programmes the rinses are performed
with more water.
If you touch the Aloita/Keskeytä button, the appliance performs only the
draining phase.
The appliance empties the water out automatically after approximately 18
hours.
7.5 Esipesu
With this option you can add a prewash phase to a washing programme.
The relevant indicator illuminates.
· Use this option to add a pre-wash phase at 30 °C before the washing phase.
This option is recommended for heavily soiled laundry, especially if
containing sand, dust, mud and other solid particles.
These options can increase the programme duration.
7.6 Permanent Lisähuuhtelu
With this option you can add a few rinses according to the selected washing
programme.
ENGLISH 13
Use this option for people with allergies to detergent residues and with
sensitive skin.
This option increases the programme duration.
The corresponding indicator above the touch button illuminates and also stays
permanently on during next cycles until this option is deactivated.
7.7 Permanent Soft Plus
Set this option to optimise the fabric softener distribution and improve
fabric softness.
Recommended when you use fabric softener.
This option increases the programme duration.
The corresponding indicator above the touch button illuminates and also stays
permanently on during next cycles until this option is deactivated.
7.8 Ajastin
With this option you can delay the start of a programme to a more convenient
time.
Touch the button repeatedly to set the required delay. The time increases in
steps of 1 hour up to 20 hours.
The display shows the indicator and the selected delay time. After touching
the Aloita/Keskeytä button, the appliance begins the countdown and the lid is
locked.
7.9 Time Manager
With this option you can reduce the programme duration depending on the load
size and the degree of soiling.
When you set a washing programme, the display shows the default duration and
dashes.
Touch Time Manager button to reduce the programme duration according to your
needs. The display shows the new programme duration and a number of dashes
will decrease accordingly:
14 www.electrolux.com
Eco 40-60 Puuvilla Synteettiset
Eco 40-60 Puuvilla Synteettiset
suitable for a full load of normally soiled garments.
a quick cycle for a full load of lightly soiled garments.
very quick cycle for a smaller lightly soiled load (max. half load
recommended).
the shortest cycle to freshen up a small amount of laundry. The Time Manager
is available only with the programmes in the table.
indicator
indicator
- Default duration for all programmes.
7.10 Aloita/Keskeytä
Touch the Aloita/Keskeytä button to start, pause the appliance or interrupt a running programme.
8. PROGRAMMES
8.1 Programme Chart
Programme Default tem- perature Temperature range
Reference spin speed Spin speed range [rpm ]
Maxi- Programme description mum (Type of load and level of soiling) load
Eco 40-60 40 °C 1)
1200 rpm 7 kg (1200 400)
White cotton and fast-coloured cotton. Nor- mally soiled items. The energy consumption decreases and the time of the washing pro- gramme is extended, ensuring good washing results.
Puuvilla
1200 rpm 7 kg
40 °C
(1200 –
90 °C – Cold 400)
White cotton and coloured cotton. Normal and heavy soil.
Synteettiset 1200 rpm 3 kg
40 °C
(1200 –
60 °C – Cold 400)
Synthetic items or mixed fabric items. Nor- mally soiled items.
Hellävarainen 1200 rpm 2 kg
30 °C
(1200 –
40 °C – Cold 400)
Delicate fabrics such as acrylics, viscose and mixed fabrics requiring gentler wash- ing. Normally and lightly soiled items.
ENGLISH 15
Programme Default tem- perature Temperature range
Reference spin speed Spin speed range [rpm ]
Maxi- Programme description mum (Type of load and level of soiling) load
Pika 14min 30 °C
800 rpm 1,5 kg Synthetic and mixed fabric items. Lightly
(800 – 400)
soiled items and items to freshen up.
Huuhtelu
1200 rpm 7 kg (1200 400)
All fabrics, except woollens and very deli- cate fabrics. Programme for rinsing and spin- ning the laundry. The default spin speed is the one used for cotton programmes. Reduce the spin speed accordingly to the type of laundry. If necessary, set the Lisähuuhtelu option to add rinses. With a low spin speed, the appli- ance performs delicate rinses and a short spin.
Linkous/ Tyhjennys
1200 rpm 7 kg (1200 400)
All fabrics, except woollens and delicate fabrics. To spin the laundry and to drain the water in the drum.
Anti-Allergy 60 °C
1200 rpm 7 kg (1200 400)
White cotton items. This programme re- moves micro-organisms thanks to a washing phase with the temperature maintained above 60°C for some minutes. This helps in remov- ing germs, bacteria, micro-organism and parti- cles. The addition of vapour together with an additional rinsing phase ensures a proper re- moval of detergent residues and pollens/aller- genic items, making it suitable for delicate and sensitive skins .
Untuvatakki 40 °C 60 °C – Cold
800 rpm 2 kg (800 – 400)
Special programme for one down jackets, synthetic blanket, duvet, bedspread and so on.
Silkki 30 °C
800 rpm 1 kg (800 – 400)
Special programme for silk and mixed syn- thetic items.
Villa
1200 rpm 1 kg
(1200 –
40 °C
40 °C – Cold
Machine washable wool, hand washable wool and other fabrics with «hand washing» care symbol2).
Urheiluvaat- 1200 rpm 3 kg
teet
(1200 –
30 °C
40 °C – Cold
Mixed fabric sportswear. Lightly soiled items or items to refresh.
16 www.electrolux.com
Programme Default tem- perature Temperature range
Outdoor 30 °C 40 °C – Cold
Reference spin speed Spin speed range [rpm ] 1200 rpm (1200 400)
Maxi- mum load
2 kg3) 1 kg4)
Programme description (Type of load and level of soiling)
Do not use fabric softener and make sure that there is no soften- er residue
in the detergent dis- penser.
Synthetic sport items. This programme is designed to gently wash modern
outdoor sportswear and is also suitable for gym, cy- cling or jogging clothes
or similar. The recom- mended laundry load is 2 kg. Waterproof, waterproof-
breathable and wa- ter repellent fabrics. This programme can al- so be used as
a water repellency restoring cy- cle, specifically tailored for treating
clothes with a hydrophobic coating. To perform the water repellency restoring
cycle, proceed as follows: · Pour the washing detergent in the compart-
ment . · Pour a special water repellency restorer for
fabric into the softener compartment of the
drawer . · Reduce the laundry load to 1 kg.
To further improve the water re- pellency restoring action, dry the laundry in
a tumble dryer by set- ting the Outdoor drying pro- gramme (if available and
if the garment care label permits tum- ble drying).
ENGLISH 17
Programme Default tem- perature Temperature range
Reference spin speed Spin speed range [rpm ]
Maxi- Programme description mum (Type of load and level of soiling) load
Denim
800 rpm 2 kg Special programme for Denim clothing
30 °C
(1200 –
with delicate washing phase to minimize
40 °C – Cold 400)
colour fading and marks. For better care a
reduced load size is recommended.
- According to Commission Regulation EU 2019/2023, this programme at 40 °C is able to clean normally soiled cotton laundry declared to be washable at 40 °C or 60 °C, together in the same cycle.
For the reached temperature in the laundry, the programme duration and other data, please refer to ‘Consumption Values’ chapter. The most efficient programmes in terms of energy consumption are generally those that perform at lower temperatures and longer duration.
- During this cycle the drum rotates slowly to ensure a gentle wash. It can
seem that the drum doesn’t rotate or doesn’t rotate properly, but this is
normal for this programme. 3) Washing programme. 4) Washing programme and
waterproofing phase.
Programme options compatibility
OPTIONS Linkous Hiljainen Esipesu Lisähuuhtelu Soft Plus Ajastin Time Manager
Programme Eco 40-60 Puuvilla Synteettiset Hellävarainen Pika 14min Huuhtelu
Linkous/Tyhjennys Anti-Allergy Untuvatakki
Silkki
Villa
18 www.electrolux.com
OPTIONS Linkous Hiljainen Esipesu Lisähuuhtelu Soft Plus Ajastin Time Manager
Programme Urheiluvaatteet
Outdoor Denim
Suitable detergents for washing programmes
Programme
Universal powder1)
Liquid Liquid for Universal coloureds
Eco 40-60
Delicates woollens
—
Special —
Puuvilla
—
—
Synteettiset
—
—
Hellävarainen
—
—
—
Pika 14min
—
—
—
Anti-Allergy
—
—
Untuvatakki
—
—
—
Silkki
—
—
—
Villa
—
—
—
Urheiluvaatteet
—
—
Outdoor
—
—
—
Denim
—
—
- At temperature higher than 60 °C the use of powder detergent is recommended.
= Recommended
— = Not recommended
ENGLISH 19
8.2 Woolmark Wool Care – Blue
The wool wash cycle of this machine has been approved by The Woolmark Compa-
ny for the washing of wool garments label- led as «hand wash» provided that
the products are washed according to the in- structions on the garment label
and those issued by the manufacturer of this washing machine. M1145 The
Woolmark symbol is a Certification mark in many countries.
9. SETTINGS
9.1 Acoustic signals
This appliance has different acoustic signals, that operate when:
· You activate the appliance (special short tune).
· You deactivate the appliance (special short tune).
· You touch the buttons (click sound). · You make an invalid selection (3
short
sounds). · The programme is completed
(sequence of sounds for about 2 minutes). · The appliance has a malfunction
(sequence of short sounds for about 5 minutes). To deactivate/activate the
acoustic signals set a one of the programme, touch the Lämpötila and the
Linkous buttons simultaneously for about 2 seconds. The display shows On/Off
10. BEFORE FIRST USE
1. Make sure that the electrical power is available and the water tap is
open.
2. Pour 2 litres of water into the detergent compartment marked by
. This action activates the drain system. 3. Pour a small quantity of
detergent
into the compartment marked by .
If you deactivate the acoustic signals, they continue to operate when the
appliance has a malfunction.
9.2 Child Lock
With this option you can prevent children from playing with the control panel.
To activate/deactivate this option, hold down the Soft Plus button until comes
on/goes off on the display. The appliance will default to this option after
you switch it off. The Child Lock function may not be available for a few
seconds after switching the appliance on.
4. Set and start a programme for cotton at the highest temperature without
any laundry in the drum.
This removes all possible dirt from the drum and the tub.
20 www.electrolux.com
11. DAILY USE
WARNING! Refer to Safety chapters.
11.1 Activating the appliance
1. Connect the mains plug to the mains socket.
2. Open the water tap. 3. Press button Päällä/Pois to activate
the appliance. A short tune sounds.
11.2 Loading the laundry
1. Open the appliance lid. 2. Push the button A.
A
The drum opens automatically. 3. Put the laundry in the drum, one item
at a time. 4. Shake the items before you put them
in the appliance. Make sure not to put too much laundry in the drum. 5. Close
the drum and the lid.
CAUTION! Before you close the lid of your appliance, make sure that you close
the drum correctly.
11.3 Detergent compartments. Using detergent and additives
1. Measure out specified detergents for washing machine the detergent and the
fabric conditioner.
2. Put the detergent and the fabric conditioner into the proper compartments.
Always obey the instructions that you find on the packaging of the detergent
products.
11.4 Liquid or powder detergent
1
2
ENGLISH 21
Detergent compartment for prewash phase. The marks MAX are the maxi- mum
levels of the quantity of detergent (powder or liquid).
Detergent compartment for washing phase. The marks MAX are the maxi- mum
levels of the quantity of detergent (powder or liquid).
Compartment for liquid addi- tives (fabric conditioner, starch). The mark M is
the maximum level for the quantity liquid ad- ditives.
Flap for powder or liquid de- tergent.
CLICK
3
CLICK
· Position A for powder detergent (factory setting).
· Position B for liquid detergent. When you use the liquid detergent: · Do not
use gelatinous or thick liquid detergents. · Do not put more liquid then the
maximum level. · Do not set the delay start function.
A
4
B
11.5 Setting a programme
1. Turn the programme dial to select the desired washing programme.
The indicator of the Aloita/Keskeytä button flashes. The display shows an
indicative programme duration. 2. To change the temperature and/or
the spin speed, touch the related buttons.
22 www.electrolux.com
3. If desired, set one or more options by touching the related buttons. The
related indicators illuminate on the display and the given information changes
accordingly.
If a selection is not possible an acoustic signal sounds and the display shows
.
11.6 Starting a programme
Touch the Aloita/Keskeytä button to start the programme. It is not possible to
start the programme when the indicator of the button is off and doesn’t flash
(e.g. programme dial on a wrong position). The related indicator stops
flashing and stays on. The programme starts, the lid is locked.
The display shows the indicator .
The drain pump can operate shortly before the appliance fills water.
11.7 Starting a programme with the delay start
1. Touch the Ajastin button repeatedly until the display shows the desired
delay time. On the display the indicator shows
.
2. Touch the Aloita/Keskeytä button. The appliance lid locks and starts the
countdown of the delay start. The display
shows the indicator . When the countdown is completed, the programme starts
automatically.
Cancelling the delay start after the countdown has started
To cancel the delay start:
1. Touch the Aloita/Keskeytä button to pause the appliance. The related
indicator flashes.
2. Touch the Ajastin button repeatedly until the display shows and the
indicator goes off.
3. Touch the Aloita/Keskeytä button again to start the programme immediately.
Changing the delay start after the countdown has started
To change the delay start:
1. Touch the Aloita/Keskeytä button to pause the appliance. The related
indicator flashes.
2. Touch the Ajastin button repeatedly until the display shows the desired
delay time.
3. Touch the Aloita/Keskeytä button again to start the new countdown.
11.8 The SensiCare System load detection
After touching the Aloita/Keskeytä button:
1. The SensiCare System starts estimating the weight of the load to calculate the real programme duration. During this phase the Time
Manager bars
placed below the
time digits play a simple animation.
2. After about 15-20 minutes the Time
Manager bars disappear and new
cycle duration is displayed.
The appliance automatically adjusts
the programme duration to the load
to achieve perfect washing results in
the minimum possible time.
The SensiCare System is not available with all programmes such as :Villa, Huuhtelu, Linkous and programmes with short cycles.
11.9 Interrupting a programme and changing the options
When the programme is running, you can change only some options:
1. Touch the button Aloita/Keskeytä .
The related indicator flashes.
ENGLISH 23
2. Change the options. The given information in the display changes
accordingly.
3. Touch the button Aloita/Keskeytä again.
The washing programme continues.
11.10 Cancelling a running programme
1. Press the button Päällä/Pois to cancel the programme and to deactivate the
appliance.
2. Press the button Päällä/Pois again to activate the appliance.
If the SensiCare System has completed and the water filling has already
started, the new programme starts without repeating the SensiCare System. The
water and the detergent are not drained out in order to avoid waste.
There is also an alternative way of cancelling: 1. Rotate the selector knob to
the “Reset”
position . 2. Wait for 1 second. The display shows
. Now, you can set a new washing programme.
11.11 Opening the lid – Adding garments
If the temperature and level of the water in the drum are too high and/or the
drum is still rotating you should not open the lid.
While a programme or the delay start operates, the appliance lid is locked.
The
display shows the indicator .
1. Touch the Aloita/Keskeytä button.
In the display the related lid lock indicator goes off. 2. Open the appliance
lid and drum
doors. If necessary, add or remove the items. Close the drum door and
lid. Touch the Aloita/Keskeytä button. The programme or the delay start continues.
11.12 End of the programme
When the programme has finished, the appliance stops automatically. The
acoustic signals operate (if they are
active). The display shows
The indicator of the Aloita/Keskeytä button goes off.
The lid unlocks and the indicator goes off.
1. Press button Päällä/Pois to deactivate the appliance.
After five minutes from the end of the programme, the energy saving function
automatically deactivates the appliance.
When you activate the appliance again, the display shows the end of the
previous programme. Turn the programme dial to set a new cycle.
2. Remove the laundry from the appliance.
3. Make sure that the drum is empty. 4. Keep the lid and the detergent
dispenser slightly ajar to prevent mildew and odours. 5. Close the water tap.
11.13 Draining water out after end of cycle
If you have chosen a programme or an option that does not empty out the water
of the last rinse, the programme is completed, but:
· The time area shows
and the
display shows the lid locked . · The drum still turns at regular
intervals to prevent creases in the laundry. · The lid stays locked. · You
must drain the water to open the lid:
24 www.electrolux.com
1. If necessary, touch the Linkous button to decrease the spin speed proposed by the appliance.
2. Press the Aloita/Keskeytä button:
· If you have set Rinse Hold the appliance drains the water and spins.
· If you have set Hiljainen the appliance only drains the water
The option indicator Rinse Hold and
Hiljainen disappears. 3. When the programme is completed
and the lid locked indicator off, you can open the lid.
goes
4. Press the Päällä/Pois button for a few seconds to deactivate the appliance.
11.14 Stand-by option
The Stand-by function automatically deactivates the appliance to reduce the
energy consumption when:
12. HINTS AND TIPS
WARNING! Refer to Safety chapters.
· You do not use the appliance for 5 minutes when no programme is running.
Press the button Päällä/Pois to activate the appliance again.
· 5 minutes after the end of the washing programme. Press the Päällä/Pois
button to activate the appliance again. The display shows the end of the last
programme. Turn the programme dial to set a new cycle.
If the dial is rotated to the “Reset”
position , the appliance automatically turns off in 30 seconds.
If you set a programme or an option that ends with water in the drum, the
Stand-by function doesn’t deactivate the appliance to remind you to drain the
water.
underwired bras, belts, tights, shoelaces, ribbons, etc. ).
12.1 The laundry load
· Divide the laundry in: white, coloured, synthetics, delicates and wool.
· Obey the washing instructions that are on the laundry care labels.
· Do not wash white and coloured items together.
· Some coloured items can discolour with the first wash. We recommend that you
wash them separately for the first times.
· Turn multilayered fabrics, wool and items with painted illustrations inside
out.
· Wash and pre-treat heavy soil stains with a suitable detergent before
putting in drum.
· Be careful with the curtains. Remove the hooks and put the curtains in a
washing bag or pillowcase.
· Do not wash laundry without hems or with cuts. Use a washing bag to wash
small and/or delicate items (e.g.
· A very small load can cause balance problems with the spin phase leading to
excessive vibration. If this occurs: – interrupt the programme and open the
door (refer to “Daily Use” chapter); -manually redistribute the load so that
the items are spaced evenly around the tub; -press the Aloita/Keskeytä button.
The spin phase continues.
· Button up pillowcases, close zippers, hooks and poppers. Tie up belts,
cords, shoelaces, ribbons and any other loose elements.
· Empty the pockets and unfold the items.
12.2 Stubborn stains
For some stains, water and detergent is not sufficient.
We recommend that you pre-treat these stains before you put the items in the
appliance.
Special stain removers are available. Use the special stain remover that is
applicable to the type of stain and fabric.
12.3 Detergent type and quantity.
The choice of detergent and use of correct quantities not only affects your wash performance, but also helps to avoid waste and protect the environment:
· Use only detergents and other treatments specially made for washing
machines. First, follow these generic rules: powder detergents for all types
of fabric, excluding delicate. Prefer powder detergents containing bleach for
whites and laundry sanitization, liquid detergents, preferably for low
temperature wash programmes (60 °C max) for all types of fabric, or special
ones for woollens only.
· The choice and quantity of detergent will depend on: type of fabric
(delicates, woollens, cottons, etc), the colour of clothes, size of the load,
degree of soiling, wash temperature and hardness of the water used.
· Follow the instructions that you find on packaging of the detergents or
other treatments without exceeding
the indicated maximum level (
).
· Do not mix different types of
detergents.
ENGLISH 25
· Use less detergent if: you are washing a small load, the laundry is
lightly soiled, there is large amounts of foam during washing.
· When using detergent tabs or pods, always put them inside the drum, not in
the detergent dispenser.
Insufficient detergent may cause: · unsatisfactory washing results, · the wash
load to turn grey, · greasy clothes, · mould in the appliance.
Excessive detergent may cause: · sudsing, · reduced washing effect, ·
inadequate rinsing, · a greater impact for the environment.
12.4 Ecological hints
To save water, energy and to help protect the environment, we recommend that
you follow these tips:
· Normally soiled laundry may be washed without prewash in order to save
detergent, water and time (the environment is protected too!).
· Loading the appliance to the maximum capacity indicated for each programmes
helps to reduce energy and water consumption.
· With adequate pre-treatment, stains and limited soiling can be removed; the
laundry can then be washed at a lower temperature.
· To use the correct quantity of detergent, refer to the quantity suggested by
the detergent producer and check the water hardness of your domestic system.
Refer to “Water hardness”.
· Set the maximum possible spin speed for the selected washing programme
before drying your laundry in a tumble dryer. This will save energy during
drying!
12.5 Water hardness
If the water hardness in your area is high or moderate, we recommend that you
use a water softener for washing machines. In areas where the water hardness
is soft it is not necessary to use a water softener.
26 www.electrolux.com
To know the water hardness in your area, contact your local water authority.
13. CARE AND CLEANING
WARNING! Refer to Safety chapters.
13.1 Periodic cleaning schedule
Periodic cleaning helps to extend the life of your appliance.
After each cycle, keep the door and the detergent dispenser slightly ajar to
get air circulation and dry the humidity inside the appliance: this will
prevent mildew and odours.
If the appliance is not used for a long time: close the water tap and unplug the appliance.
Indicative periodic cleaning schedule:
Descaling
Twice a year
Maintenance wash Once a month
Clean lid seal
Every two months
Clean drum
Every two months
Clean detergent dispenser
Every two months
Clean drain pump Twice a year filter
Clean the inlet
Twice a year
hose and the valve
filter
The following paragraphs explain how you should clean each part.
13.2 Removing foreign objects
Make sure that pockets are empty and all loose elements are tied up before running your cycle. Refer to ‘The laundry load’ in ‘Hints and tips’.
Remove any foreign objects (such as metal clip, buttons, coins, etc) that you may find in the filters and the drum. Refer
Use the correct quantity of the water softener. Obey the instructions that you
find on the packaging of the product.
to ‘Cleaning the drum’, ‘Cleaning the drain pump’ and ‘Cleaning the inlet hose
and the valve filter’ paragraphs. If necessary, please contact the Authorised
Service Centre.
13.3 External cleaning
Clean the appliance with mild soap and warm water only. Fully dry all the
surfaces. Do not use a scouring pads or any scratching material.
CAUTION! Do not use alcohol, solvents or chemical products.
CAUTION! Do not clean the metal surfaces with chlorine-based detergent.
13.4 Descaling
If the water hardness in your area is high or moderate, we recommend that you
use a water descaling product for washing machines.
Regularly examine the drum to check for limescale.
Regular detergents already contain water softening agents, but we recommend to
run a cycle with an empty drum and a descaling product occasionally.
Always follow the instructions that you find on the packaging of the product.
13.5 Maintenance wash
The repeated and prolonged use of low temperature programmes can cause
detergent deposits, fluff residues, bacterial growth inside the drum and the
tub. This could generate bad odours and mildew. To eliminate these deposits
and
ENGLISH 27
clean the inner part of the appliance, run a maintenance wash regularly (at
least once a month).
Refer to “Cleaning the drum” paragraph.
13.6 Cleaning the drum
Regularly examine the drum to prevent unwanted deposits.
Rust deposits in the drum may occur due to rusting foreign body in the washing
or tap water containing iron
Clean the drum with special products for stainless steel.
Always follow the instructions that you find on the packaging of the product.
Do not clean the drum with acidic descaling products, scouring products
containing chlorine or iron or steel wool.
For a thorough clean:
1. Remove all laundry from the drum. 2. Run a Puuvilla programme with the
highest temperature. 3. Add a small quantity of powder
detergent into the empty drum, in order to rinse out any left residues.
Occasionally, at the end of a cycle the display may show
the icon : this is a recommendation to perform the “drum cleaning”. Once the
drum cleaning has been performed, the icon disappears.
13.7 Lid seal
Regularly examine the seal and remove all objects from the inner part. Clean
it when needed, using ammonia cream cleanser agent without scratching the seal
surface.
Always obey the instructions that you find on the packaging of the product.
13.8 Cleaning the detergent dispenser
1
2
3
28 www.electrolux.com
13.9 Cleaning the inlet hose and the valve filter
1
2
1
2
3
1
3
4
O
90
13.10 Cleaning the drain filter
Regularly check the drain pump filter and make sure that it is clean.
Clean the drain pump if:
· The appliance does not drain the water.
· The drum does not turn. · The appliance makes an unusual
noise because of the blockage of the drain pump. · The display shows the alarm
code
Proceed as follows to clean the pump:
1
2
WARNING! · Disconnect the mains
plug from the mains socket. · Do not remove the filter while the appliance
operates. · Do not clean the pump if the water in the appliance is hot. Wait
until the water cools down .
Always keep a rag nearby to dry up any water spillages when removing the
filter.
3
4
5
13.11 Emergency drain
If the appliance cannot drain the water, carry out the same procedure,
described in ‘Cleaning the drain pump’ paragraph. If necessary, clean the
pump.
When you drain the water with the emergency drain procedure, you must activate
the drain system again:
1. Put 2 litres of water in the main wash compartment of the detergent
dispenser.
2. Start the programme to drain the water.
13.12 Frost precautions
If the appliance is installed in an area where the temperature can reach
values around 0° C or drop below, remove the remaining water from the inlet
hose and the drain pump.
14. TROUBLESHOOTING
ENGLISH 29
1. Disconnect the mains plug from the mains socket.
2. Close the water tap. 3. Put the two ends of the inlet hose in
a container and let the water flow out of the hose. 4. Empty the drain pump.
Refer to the emergency drain procedure. 5. When the drain pump is empty,
install the inlet hose again.
WARNING! Make sure that the temperature is higher than 0 °C before you use the
appliance again. The manufacturer is not responsible for damages caused by low
temperatures.
WARNING! Refer to Safety chapters.
14.1 Alarm Codes and Possible failures
The appliance does not start or it stops during operation. First try to find a
solution to the problem (refer to the tables).
WARNING! Deactivate the appliance before carrying out any check.
With some problems, the display shows an alarm code and the Aloita/Keskeytä button may flash continuously:
Problem
The appliance does not fill with water properly.
Possible solution
· Make sure that the water tap is open. · Make sure that the pressure of the
water supply is not too
low. For this information, contact your local water authority. · Make sure
that the water tap is not clogged. · Make sure that the inlet hose has no
kinks, damages or
bends. · Make sure that the connection of the water inlet hose is
correct. · Make sure that the filter of the inlet hose and the filter of
the valve are not clogged. Refer to ‘Care and cleaning’.
30 www.electrolux.com
The appliance does not drain the water.
· Make sure that the sink spigot is not clogged. · Make sure that the drain
hose has no kinks or bends. · Make sure that the drain filter is not clogged.
Clean the fil-
ter, if necessary. Refer to “Care and cleaning”. · Make sure that the
connection of the drain hose is correct. · Set the drain programme if you set
a programme without
drain phase. · Set the drain programme if you set an option which ends
with water in the tub.
No communication between electronic elements of the ap- pliance.
· The programme was not finished properly or the appliance stopped too early.
Switch the appliance off and on again.
· If the alarm code appears again, contact the Authorised Service Centre.
The mains supply is unstable.
· Wait until mains supply is stable.
· Disconnect the appliance and close the water tap. Contact The anti-flood device the Authorised Service Centre. is on.
If the display shows other alarm codes, deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre. In case of different problem with the washing machine check the table below for possible solutions.
Problem
Possible solution
·
·
The programme does not start.
· ·
·
· ·
Make sure that the mains plug is connected to the mains socket. Make sure that
the appliance lid and drum door are closed. Make sure that there is no damaged
fuse in the fuse box.
Make sure that the Aloita/Keskeytä has been touched. If the delay start is
set, cancel the setting or wait for the end of countdown. Deactivate the Child
Lock function if it is on. Check the position of the knob on the selected pro-
gramme.
The appliance fills · Make sure that the drain hose is in the correct position.
with water and drains The hose may be positioned too low. Refer to “Installation
immediately.
instruction”.
ENGLISH 31
Problem
Possible solution
· Set the spin programme.
The spin phase does · Make sure that the drain filter is not clogged. Clean the fil-
not operate or the
ter, if necessary. Refer to “Care and cleaning”.
washing cycle lasts · Adjust manually the items in the tub and start the spin
longer than usual.
phase again. This problem may be caused by balance
problems.
· Make sure that the couplings of the water hoses are tight
and there is not water leakages.
There is water on the · Make sure that the water inlet hose and the drain hose
floor.
have no damages.
· Make sure you use the correct detergent and the correct
quantity of it.
· Make sure that a washing programme that ends with water
in tub, has not been selected.
· Make sure that the washing programme is finished.
You cannot open the · Set the drain or the spin programme if there is water in the
appliance lid.
drum.
· Make sure that the appliance receives electrical power.
· This problem may be caused by a failure of the appliance.
Contact the Authorised Service Centre.
· The appliance makes an unusual noise and · vibrates.
·
Make sure the levelling of the appliance is correct. Refer to “Installation instruction”. Make sure that the packaging and/or the transit bolts are removed. Refer to “Installation instruction”. Add more laundry in the drum. The load may be too small.
The programme du- ration increases or decreases during programme execu- tion.
· The SensiCare System is able to adjust the programme duration according to the type and the laundry load size. Refer to “The SensiCare System load detection” in “Daily Use” chapter.
The washing results are not satisfactory.
· Increase the detergent quantity or use a different deter- gent.
· Use special products to remove the stubborn stains before you wash the
laundry.
· Make sure that you set the correct temperature. · Decrease the laundry load.
Too much foam in the drum during the washing cycle.
· Reduce the quantity of detergent.
After the washing cy- · cle, there are some · detergent residues in the dispenser drawer.
Make sure that the flap is in the correct position. Make sure you have used the detergent dispenser accord- ing the indications given in this user manual.
After the check, activate the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the Authorised Service Centre. The necessary data for the service centre are on the rating plate.
32 www.electrolux.com
15. CONSUMPTION VALUES
15.1 Introduction
See the web link www.theenergylabel.eu for detailed information about Energy Label.
The QR code on the energy label supplied with the appliance provides a web
link to the information related to the performance of the appliance in the EU
EPREL database. Keep the energy label for reference together with the user
manual and all other documents provided with this appliance. It is also
possible to find the same information in EPREL using the link
https://eprel.ec.europa.eu and the model name and product number that you find
on the rating plate of the appliance. Refer to ‘Product description’ chapter
for the position of the rating plate.
15.2 Legend
kg kWh Litres %
Laundry load.
h:mm Programme duration.
Energy consumption.
°C
Temperature in the laundry.
Water consumption.
rpm Spin speed.
Remaining moisture at the end of spinning phase. The higher is the spin speed, the higher is the noise and the lower is the remaining moisture.
Values and programme duration may differ depending on different conditions (e.g. room temperature, water temperature and pressure, load size and type of laundry, supply voltage) and also if you change the default setting of a programme.
15.3 According to Commission Regulation Eu 2019/2023
Eco 40-60 pro- gramme
kg
kWh Litres h:mm
%
Full load
7
1.160 50
3:25
53
Half load
3,5 0.630 39
2:40
53
Quarter load
2
0.400 32
2:40
55
- Maximum spin speed.
°C
rpm1)
48
1151
41
1151
29
1151
Power consumption in different modes
Off (W)
Stand-by (W)
0.48
0.48
Time to Off/Standby mode is 15 minutes maximum.
15.4 Common programmes
These values are indicative only.
ENGLISH 33
Delay start (W) 4.00
Programme
kg
kWh Litres h:mm
%
°C
Puuvilla2) 90°C
7
2.60
85
3:25
53
85
Puuvilla 60°C
7
1.85
85
3:25
53
55
Puuvilla 20°3) 20°C
Synteettiset 40°C
7
0.40
85
2:45
53
20
3
0.65
55
2:10
35
40
Hellävarainen4) 30°C
2
0.35
50
1:00
35
30
Villa 30°C
1
0.20
35
1:10
30
30
- Reference indicator of the spin speed. 2) Suitable for washing heavily soiled textiles. 3) Suitable for washing lightly soiled cottons, synthetic and mixed fabrics. 4) It also performs as quick washing cycle for lightly soiled laundry.
16. QUICK GUIDE
16.1 Daily use
1
2
3
2
rpm1) 1200 1200 1200 1200 1200 1200
1
34 www.electrolux.com
Connect the mains plug to the mains socket.
Open the water tap.
Load the laundry.
Pour the detergent and other treatment in the proper compartment of the
detergent dispenser.
1. Push the Päällä/Pois button to turn the appliance on. Turn the programme
dial to set the desired programme.
2. Set the desired options (1) by means of the corresponding touch buttons.
To start the programme, touch the
Aloita/Keskeytä (2) button. 3. The appliance starts. At the end of the
programme, remove the laundry.
Push the Päällä/Pois button to turn the appliance off.
16.2 Cleaning the drain pump filter
1
2
3
Clean the filter regularly and, especially,
if the alarm code display.
appears on the
16.3 Programmes
Programmes Eco 40-60 Puuvilla Synteettiset Hellävarainen Pika 14min
Huuhtelu
Linkous/Tyhjennys
Load 7 kg 7 kg 3 kg 2 kg 1,5 kg
7 kg
7 kg
Product description
White and coloured cottons. Normally soiled garments.
White cotton and coloured cotton.
Synthetic items or mixed fabric items.
Delicate fabrics such as acrylics, viscose, polyester items.
Cotton and synthetic lightly soiled items or once worn items.
All fabrics, except woollens and very deli- cate fabrics. Programme for
rinsing and spinning.
All fabrics, except woollens and very deli- cate fabrics. Programme for
spinning and draining the water.
ENGLISH 35
Programmes
Load
Product description
Anti-Allergy Untuvatakki
7 kg
White cotton items. This programme helps to remove germs and bacteria.
2 kg
Single synthetic blanket, padded clothes, duvets, down jackets.
Silkki
1 kg
Special programme for silk and mixed syn- thetic items.
Villa Urheiluvaatteet
1 kg
Machine washable wool, hand washable wool and delicates.
3 kg
Sportswear.
Outdoor
2 kg1) 1 kg2)
Modern outdoor sporting garments.
Denim
2 kg
Denim clothing.
- Washing programme. 2) Washing programme and waterproofing phase.
17. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of
appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
135997591-A-442021
www.electrolux.com/shop