Verkada ACC-MNT-REC-1 Recess Ceiling Mount Installation Guide
- June 12, 2024
- Verkada
Table of Contents
Verkada ACC-MNT-REC-1 Recess Ceiling Mount Installation Guide
What’s in the box
-
Recess Ceiling Mount Bracket
-
Hole Cutout Template
-
Recess Ceiling Mount Cover
-
M4x0.7 Machine Screw (4 pcs) Length: 8mm Drive: #2 Phillips
What you’ll need
- A Verkada Indoor Dome Camera
- A T10 Torx Security Screwdriver
- A #2 Phillips screwdriver or power drill with a #2 Phillips driver bit
- A utility knife
Compatible products
For a list of compatible products, please visit:
https://docs.verkada.com/docs/accessories-overview.pdf
Overview
Mounting
Disassemble camera by undoing the T10 security screws and remove the top cover.
Loosen the thumbscrews to separate the camera from its mount plate.
Attach the camera mount plate to the Recess Ceiling Mount Bracket using the
provided M4 screws.
Identify the desired mounting location on the ceiling and adhere the hole cutout template.
Cut a hole, following the outline of the template, using a utility knife.
Bring the Ethernet cable through the hole.
Thread ethernet cable through mounting bracket and camera mount plate.
Tighten screws (circled in red) using a #2 Phillips driver to clamp the
mounting bracket into the ceiling.
Connect the ethernet cable to the camera, then attach the camera to its mount plate and tighten thumbscrews with a #2 Phillips screwdriver.
Reattach the top cover to the camera and tighten the T10 screws
Align the T10 security screw hole on the plastic cover with the blue indicator
on the mounting bracket, and twist to lock the cover.
Tighten the T10 security screw on the plastic cover.
Appendix Support
Thank you for purchasing this Verkada product. If for any reason you’re experiencing issues or need assistance, please contact our 24/7 Technical Support Team immediately.
Sincerely,
The Verkada Team verkada.com/support
Verkada Inc. 406 E. 3rd Ave, San Mateo, CA 94401 sales@verkada.com
All specifications are subject to change without notice Copyright © 2023 Verkada Inc. All rights reserved.