ASUS Q20913 Rog Strix Scope TKL Mechanical Gaming Keyboard User Guide

: June 12, 2024
: Asus

Table of Contents

MECHANICAL GAMING KEYBOARD
ROG STRIX SCOPE TKL

MECHANICAL GAMING KEYBOARD

ROG STRIX SCOPE TKL

Quick Start Guide

Q20913
Revised Edition V6
August 2022
Copyright © ASUSTeK Computer Inc.
All Rights Reserved

Package Contents

ASUS Q20913 Rog Strix Scope TKL Mechanical Gaming Keyboard
A0

1. Connect the bundled USB Type-C® cable to your keyboard.

ASUS Q20913 Rog Strix Scope TKL Mechanical Gaming Keyboard
A3

2. Connect your keyboard to the PC.
3. Download and install the Armoury Crate software from https://rog.asus.com.
4. Follow the software instructions to update your keyboard’s firmware.
5. Customize your keyboard using Armoury Crate.

Key combinations

Function Key / Media Function Toggle
Fn + Ins: Toggle between system function and media control for the F5 – F12 keys.

Stealth Mode: Minimize all windows and mute / Maximize all windows and unmute
F12: Minimize all active windows and mute the system, or maximize all minimized windows and unmute the system.

This function is only available when the F5 – F12 keys are toggled to Media Function.

On-the-fly macro recording
Step 1: Fn + Left-ALT to start recording
Step 2: Fn + Left-ALT to end recording
Step 3: Assign Macro Key

Profile Switch
Fn + 1 / 2 / 3 / 4 / 5 / 6*

6 is default

Light Effect Switch
Fn + Right or Fn + Left

Brightness Level
Fn + Up: Brightness up
Fn + Down: Brightness down

Print screen, Scroll lock, Pause keys
Fn + Delete: Print Screen (PrtScr)
Fn + End: Scroll Lock toggle (ScrLk)
Fn + PageDown: Pause (Pause)

Factory Default
Fn + Esc: Hold these two buttons for over 10-15 seconds to reset to factory settings.

When running AURA SYNC, the hot key related with the lighting effect will be disabled, for example: Profile switch, Lighting effects switch, Brightness level.

Profile color and lighting effect mapping list

Effects and the color|

Profile 1 (Red)

Default Profile

---|---|---|---|---|---|---
Static|

Red

White

Breathing|

Red

White

Color Cycle|

Multi-color

Multi-color

Wave|

Multi-color

Multi-color

Ripple|

Red

Random color

Reactive|

Red

Random color

Starry Night|

Red

Random color

Quicksand|

Red

Random color

Current|

Red

Random color

Rain Drop|

Red

Random color

The default color(s) for the RGB lock indicator LEDs can be customized by switching profiles. Please refer to the table above.
Whenever lock keys are enabled (Caps Lock, Scroll Lock, Fn-Lock, and Win Lock), the corresponding LEDs will always be lit. The default color will be displayed if no lighting effects are active. e.g. When Profile 3 is selected, any enabled lock indicator LEDs will always be blue or multi-colored unless specified otherwise.

Safety Guidelines

Notices

ASUS Recycling/Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.

REACH

Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.

DO NOT throw the keyboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin indicates that the product (electrical and electronic equipment) should not be placed in municipal waste. Check local regulations for disposal of electronic products.

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Compliance Statement of Innovation, Science and Economic Development

Canada (ISED)

This device complies with Innovation, Science, and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
CAN ICES-003(B)/NMB-003(B)

VCCI: Japan Compliance Statement

Class B ITE

KC: Korea Warning Statement

France sorting and recycling information

EAC Certification Logo

EAC

Simplified UKCA Declaration of Conformity

ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Regulations. Full text of UKCA declaration of conformity is available at https://www.asus.com/support/.

CE Mark Warning

English ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity available at: www.asus.com/support

Service and Support
Visit our multi-language website at https://www.asus.com/support/.

Manufacturer	ASUSTek COMPUTER INC.
Address, City	1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112
Authorized Representative in Europe	ASUS COMPUTER GmbH
Address	Harkortstrasse 21-23, 40880 Ratingen
Country	Germany
Authorized Representative in United Kingdom	ASUSTEK (UK) LIMITED
Address	1st Floor, Sackville House, 143-149 Fenchurch Street, London,