Allen-Bradley 58UHF Series RFID Short-Range Transceiver Instruction Manual

: June 12, 2024
: Allen Bradley

Table of Contents

IMPORTANT INFORMATIONS
Features
Typical Applications
Specifications
Status Indicator Functionality
Connector Pinouts
FCC Notice (For U.S. Customers)
ISED Information
Declaration of Conformity
Rockwell Automation Support
Documentation Feedback
Waste Electrical and Electronic Equipment (WEEE)
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Allen-Bradley 58UHF Series RFID Short-Range Transceiver

IMPORTANT INFORMATIONS

Catalog Numbers 58UHF-TR-100-SR15US, 58UHF-TR-100-SR15EU

WARNING : Never disassemble or modify the scanner. Doing so could result in an accident such as fire or electric shock.

Features

Global Ultra-High Frequency (UHF) RFID solution
- 865…868 MHz EU and UK model (CE)
  902…928 MHz US and North America model (FCC)
Tag compatibility: ISO 18000-63 (EPC global Gen2) compliant
Sensing range up to 1.5 m (4.92 ft)
Built-in status indicators for diagnostics
All-in-one linear and circular antennas
Excellent reliability in harsh environments

Typical Applications

Asset tracking
Data acquisition
Product handling
Automotive
Food and pharmaceutical

Specifications

Attribute	Value
Enclosure rating	IP66/67
Operating temperature [°C (°F)]	-20…+55 (-4…+131)
Storage temperature [°C (°F)]	-40…+85 (-40…+185)
Relative humidity (1)

Operating: 35…95%
Storage: 25…85%

EtherNet/IP™: M12 4-pin plug DC Micro
Power and I/O: M12 4-pin socket DC Micro

Communication protocol| EtherNet/IP
Supply voltage| 19.2…26.4V DC
Current consumption at 24V DC, max|

Supply: 1 A CLASS2/SELVS
Input: 15 mA
Output: 0.5 A

Communication rate|

RFID: 1024 bps
Ethernet: 10/100 Mbps, half or full-duplex

Frequency|

865.7…867.5 MHz EU and UK model (at 600 kHz intervals, 4 channels total)
902.75…927.25 MHz US and North America model (at 500 kHz intervals, 50 channels total)

(1) No condensation
(2) The setting limits depend on the country or the function. This reference value can vary depending on the operating environment tag type.

Status Indicator Functionality

Name	Description	State	Indicates
MOD	Indicates status of the transceivers	Off	No power
Steady green	Device operational
Flashing green	Standby (device has not been configured)
Flashing red	Major recoverable fault
Steady red	Major nonrecoverable fault
Flashing green/red	Self-test (power-up testing)
Link1/2	Indicates status of Ethernet (E1/ E2) port	Off	No link
Steady green	Link
Steady yellow	Port disabled
Flashing green	Port activity (data packets currently being exchanged)
Flashing yellow	Collision
Steady red	Major NIC fault
NET	Indicates status of the connections	Off	No power or powered on with no

IP address
Flashing green| No connections (IP address, but no CIP™ connections are established, and an exclusive owner connection has timed out)
Steady green| Connected
Flashing red| Connection timeout
Steady red| Duplicate IP
Flashing green/red| Self-test (power-up testing)
R/W| Indicates status of the read/write commands| Off| No power
Steady green| Powered but idle
Flashing green| Transmitting RF carrier wave (no tags detected)
Steady yellow| Succeeded at tag operation (tag read/write complete)
Flashing yellow| Failed at tag operation (tag read/write incomplete)
Flashing red| RF transmit failure

IMPORTANT Installation must be in accordance with local and/or national codes. Servicing energized industrial control equipment can be hazardous if not in accordance to recommended safety procedures.

Connector Pinouts

Table 1 – EtherNet/IP (1)

DC M12, D-coded, 4-pin Plug	Pin	Signal
1	TxData +	White/orange
2	Recv Data +	White/green
3	TxData –	Orange
4	Recv Data –	Green

(1) E1 – Standard right-angle Ethernet cables point left.
E2 – Standard right-angle Ethernet cables point right.

Table 2 – Power I/O

DC M12, D-coded, 4-pin Socket	Pin	Signal
1	+24V DC	Brown
2	Input	White
3	0V DC	Blue
4	Output	Black

FCC Notice (For U.S. Customers)

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following conditions: (1) This device will not cause harmful interference; and (2) This device must accept any interference received, including interference that can cause undesired operation of the device. Changes and modifications that are not expressly approved by Rockwell Automation can void your authority to operate this equipment under Federal Communications Commissions rules.

This equipment is tested and found to comply with the limits for a Class A digital device, according to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

ATTENTION: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, can cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case you must correct the interference at your own expense.

IMPORTANT

This equipment complies with FCC radiation exposure limits for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. When you install and operate this equipment, keep a minimum of 35 cm (13.78 in.) between the radiator and a person’s body

ISED Information

This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference; and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

IMPORTANT

This equipment complies with ISED radiation exposure limits for an uncontrolled environment and meets RSS 102 of the ISED radio frequency (RF) Exposure rules. When you install and operate this equipment, keep a minimum of 35 cm (13.78 in.) between the radiator and a person’s body.

Declaration of Conformity

CE Conformity

Rockwell Automation, Inc. declares that the radio equipment type 58UHF- TR-100-LR15EU is in compliance with the 2014/53/EU Radio Equipment Directive and the 2011/65/EU RoHS Directive.
For a comprehensive CE certificate visit: rok.auto/certifications.

UKCA Conformity
Rockwell Automation, Inc. declares that the radio equipment type
58UHF-TR-100-LR15EU is in compliance with the Radio Equipment Regulations (2017 No. 1206) and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations (2012 No. 3032).
For a comprehensive UKCA certificate visit: rok.auto/certifications. Türkiye Cumhuriyeti: AEEE Yönetmeliðine Uygundur

Application	Frequency Range	Power
UHF RFID	865…868 MHz	2 W e.r.p.

Rockwell Automation Support

Use these resources to access support information.

Technical Support Center| Find help with how-to videos, FAQs, chat, user forums, Knowledgebase, and product notification updates.| rok.auto/support
---|---|---
Local Technical Support Phone Numbers| Locate the telephone number for your country.| rok.auto/phonesupport
Technical Documentation Center| Quickly access and download technical specifications, installation instructions, and user manuals.| rok.auto/techdocs
Literature Library| Find installation instructions, manuals, brochures, and technical data publications.| rok.auto/literature
Product Compatibility and Download Center (PCDC)| Download firmware, associated files (such as AOP, EDS, and DTM), and access product release notes.| rok.auto/pcdc

Documentation Feedback

Your comments help us serve your documentation needs better. If you have any suggestions on how to improve our content, complete the form at rok.auto/docfeedback.

Waste Electrical and Electronic Equipment (WEEE)

At the end of life, this equipment should be collected separately from any unsorted municipal waste.

Rockwell Automation maintains current product environmental compliance information on its website at rok.auto/pec.

Rockwell Otomasyon Ticaret A.Ş. Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400 EEE Yönetmeliğine Uygundur

Connect With us.

rockwellautomation.com

expanding human possibility”

AMERICAS: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444
EUROPE/MIDDLE EAST /AFRICA: Rockwell Automation NV, Pegasus Park, De Kleetlaan 12a, 1831 Diegem, Belgium, Tel: (32) 2 663 0600, Fax: (32) 2 663 0640 ASIA PACIFIC: Rockwell Automation, Level 14, Core F, Cyberport 3, 100 Cyberport Road, Hong Kong, Tel: (852) 2887 4788, Fax: (852) 25081846 UNITED KINGDOM: Rockwell Automation Ltd. Pitfield, Kiln Farm Milton Keynes, MKll 3DR, United Kingdom, Tel: (44)(1908) 838-800, Fax: (44 (1908) 261-917

Allen-Bradley, expanding human possibility, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
CIP and EtherNet/IP are trademarks of ODVA, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.

Publication 58UHF-IN001A-EN-P – December 2022 | –
Copyright © 2022 Rockwell Automation, Inc. All rights reserved. Printed in the Japan 10007125910 Ver 00