la marzocco Wally Milk Instructions
- June 8, 2024
- la marzocco
Table of Contents
la marzocco Wally Milk
Strada AV
The kit 1025 can be installed either on the right or on the left side of the
machine, and it replaces all parts from the steam boi•ler to the proportional
solenoid valve.
Note : in order to fit the kit on the right side of the boiler, the
machine must have the B.2.029 SMA vacuum breaker (which is supplied with the
kit), as the older vacuum breaker valve does not allow enough clearance.
The kit 1025 can be installed either on the right or on the left side of the
machine.
New frames, which are in production from serial number S1007736, have squared
holes in both sides of the base to allow the wally milk tube to be easi.ly
inserted. Strada AVs prior to
ST007736 do not have any access for the steam tube in the base frame. For
these machines, we suggest to create a slot in the lower side of the back
panel.
Linea PB / KB90
kit 1 Dl 4 – 1015
kit 1015
Left side kit (1015) can be fitted in all Linea PBs and KB90s, using one of
the two indicated holes
kit 1014
Right side kit (1014) can be fitted in recent frames on.ly, since holes are
not present in frames prior to serial number PB027190 and KB002136.
6B5 X-S
kit 1012 – 1013
Kit 1012 can be fitted on the right side, while kit 1013 can be fitted on
the left side of the machine.
Kit 1012 can be fitted on the right side, while kit 1013 can be fitted on the
left side of the machine.
The holes in both sides of the base frame allow for inserting the steam tube
from underneath the machine.
6B5 / FB80
kit 10l8 – 1019
Linea Classic
kit 10l6 – 1017
Kit 1016 can be fitted on the right side, while kit 1017 can be fitted on
the left side of the machine. The base frame has holes to allow inserting the
steam tube from underneath the machine.
Attention: if the CL03/*PR sealing panel is present underneath the framel
this must be removed or drilled.
Kit 1016 can be fitted on the right side, while kit 1017 can be fitted on the
left side of the machine. The base frame has holes to allow inserting the
steam tube from underneath the machine.
Attention: if the CL03/*PR sealing panel is present underneath the framel
this must be removed or drilled.
**Modbar Steam
**
Attention: not suitable for pre-2019 version.
kit 1023
Kit 1023 can be fitted either 011 Tap 1 or Tap 2 outlet. A new connection
cable is also supplied to connect Wally Milk to the module’s electronics.
The included fittings and PTFE tube have increased diameter in order to supply
proper steam pressure to Wally Milk to maximize its frothing performance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>