NTW NHDMI4-SP-0104 HDMI Splitter User Manual
- June 12, 2024
- NTW
Table of Contents
NTW NHDMI4-SP-0104 HDMI Splitter
DESCRIPTION
A single HDMI input signal can be divided into numerous HDMI output signals with the “NTW NHDMI4-SP-0104” HDMI Splitter. It most certainly supports HDMI version 1.4 or later, which enables the transmission of high-definition video and audio. The “0104” in the model number may refer to the device’s one input and four output ports, which enable it to simultaneously send the same audio and video signal from a single source (such as a Blu-ray player, game console, or computer) to up to four other displays or devices. This might be helpful in situations like presentations, video distribution, or home entertainment settings where you wish to show the same content on numerous displays.
SPECIFICATIONS
- Brand: NTW
- Product Dimensions: 4.49 x 0.93 x 2.98 inches
- Item Weight: 1.4 pounds
- Item model number: NHDMI4-SP-0104
WHAT’S IN THE BOX
- HDMI Splitter
- User Manual
FEATURES
-
Amount of Outputs:
The “0104” in the model number denotes that this splitter may spread the same signal to up to 4 separate screens or devices, indicating that it has 1 input and 4 outputs. -
Compatible with HDMI version:
Keep an eye out for support for HDMI versions like HDMI 1.4, 2.0, or 2.1. Variable versions include features like 4K resolution, HDR (High Dynamic Range), and more, as well as variable degrees of video and audio quality. -
Support for Video Resolution:
Depending on the capabilities of the device, splitters typically support a range of video resolutions, including Full HD (1080p), 4K Ultra HD (2160p), and possibly greater resolutions. -
compatibility with audio:
Verify the splitter’s support for several audio formats, including DTS-HD Master Audio, Dolby TrueHD, and others. Multi-channel audio can be handled by some splitters as well for a more immersive audio experience. -
Management of EDID:
By optimizing video and audio settings, certain splitters provide EDID (Extended Display Identification Data) management, which aids in ensuring compatibility between the source device and the linked displays. -
Plug-and-Play:
Choose a splitter that is simple to install and doesn’t call for elaborate configurations. The installation process is made simpler by plug-and-play capabilities. -
Compact Form:
HDMI splitters are typically small devices that may be simply installed in your home theater system or next to your source device. -
Steel Casing:
A metal casing is available on some splitters, which offers superior longevity and protection from electromagnetic interference. -
Remote management:
Some splitters have remote controls that let you switch between output displays or change settings without having to touch the splitter directly. -
HDCP compatibility with 3D:
Make sure the splitter supports 3D and HDCP (High-bandwidth Digital Content Protection) if you are working with protected content. -
Cascade Assistance
To increase the number of output screens, some cutting-edge splitters allow you to daisy-chain several splitters together. -
Amplification of the signal:
Look for a splitter with built-in signal boosting or amplification features if you need to stretch the signal over greater distances. -
Reduced Latency:
Consider a model with low latency if you intend to use the splitter for real- time or gaming applications to prevent delays between the source and the displays.
CONNECTIONS
-
Input Source for HDMI:
Using a regular HDMI cable, join the HDMI output port of your source device (such a Blu-ray player, gaming console, or computer) to the HDMI input port on the splitter. -
Displays and devices with HDMI output:
Your displays, monitors, and other output devices should be connected to the HDMI output ports on the splitter using their HDMI input ports. The “0104” in the model number denotes that up to four output devices can typically be connected. -
Power:
The majority of HDMI splitters need power to function. Connect the splitter to the power adapter that is included, then plug it into an electrical outlet. -
Elective Audio:
Audio distribution is supported by several HDMI splitters. Make sure the splitter can handle audio if your source device sends audio through HDMI and you wish to broadcast it to the displays or other devices. If the screens don’t have built-in speakers or audio output, you might need extra audio cords. -
Configuration or switching:
For setup purposes, such as choosing the desired output or modifying particular settings, some splitters may feature switches or buttons. For instructions on how to use these features, consult the user manual for the product. -
Turn on:
All linked monitors and your source device should be turned on. The source signal should be immediately detected by the splitter, which will then send it to the attached screens.
PRECAUTIONS
-
Consult the manual:
Always read and comprehend the manufacturer’s given user handbook. This will provide you with detailed instructions, cautions, and recommendations for how to set up and use the HDMI splitter correctly. -
Requirements for power
Use the correct power adaptor that the manufacturer has provided. Using an unsuitable power supply could harm the gadget or reduce its functionality. -
Ventilation:
Make sure the location of the HDMI splitter is well-ventilated. Avoid covering it or putting it in a small area because doing so can cause it to overheat. -
Limit Overload:
Never use the splitter to connect more devices than it is designed to handle. More than four monitors connected to a splitter that is only intended for four outputs could cause damage or performance problems. -
Avoid Using Too Much Force:
Using too much force when connecting HDMI or power connections is not advised. It is best to make secure connections that are gentle on the ports and cords. -
Cable handling technique:
Carefully handle HDMI cables and connectors to prevent pin bending or other damage. Cables should never be pulled out of a connector; instead, hold the connector firmly. -
Cycling with power
Try power cycling the linked devices by unplugging them from power for a little period of time and then plugging them back in if the splitter or attached devices are giving you any problems. -
Updates to Firmware:
Check the manufacturer’s website for any available updates if the HDMI splitter supports firmware updates. Updating the firmware of the device can enhance performance and address potential problems. -
Electricity Security:
Make that the electrical connections and power outlet are secure and properly grounded. Don’t use outlets or power cords that have damage.
FREQUENTLY ASKED QUESTIONS
What is the NTW NHDMI4-SP-0104 HDMI Splitter?
The NTW NHDMI4-SP-0104 is an HDMI splitter designed to take a single HDMI input signal and distribute it to up to four HDMI output devices simultaneously.
What is the purpose of an HDMI splitter?
An HDMI splitter allows you to display the same audio and video content from a single source device on multiple displays or monitors simultaneously.
How many output ports does the NHDMI4-SP-0104 have?
The NTW NHDMI4-SP-0104 has four HDMI output ports.
Does the splitter support 4K resolution?
Yes, many HDMI splitters, including the NHDMI4-SP-0104, often support 4K resolution, but it's essential to verify this in the product specifications.
Is external power required for the NHDMI4-SP-0104 HDMI Splitter?
Yes, the NHDMI4-SP-0104 usually requires external power to operate. It might come with a power adapter that needs to be plugged into an outlet.
What type of HDMI audio formats does the splitter support?
The splitter should support various HDMI audio formats, including standard stereo audio, as well as surround sound formats like Dolby Digital and DTS.
Can I use the splitter to extend my desktop across multiple monitors?
No, an HDMI splitter is designed to duplicate the same signal on all connected displays. To extend your desktop, you would need a device like an HDMI splitter.
Is the NHDMI4-SP-0104 HDCP compliant?
HDCP (High-bandwidth Digital Content Protection) compliance is common in modern HDMI devices, including splitters. Check the product specifications to confirm HDCP support.
Can I use this splitter to switch between multiple input devices?
No, the NHDMI4-SP-0104 is designed for a single input to multiple outputs. If you need to switch between multiple input devices on a single display, you would need an HDMI switch.
Is this splitter compatible with gaming consoles?
Yes, the NHDMI4-SP-0104 should be compatible with gaming consoles, as long as the output resolution and HDMI version are supported.
Can I daisy chain multiple HDMI splitters together?
Daisy chaining HDMI splitters might not work as intended due to signal degradation. It's best to use a distribution amplifier instead for multiple display setups.
Does the splitter support 3D content?
Many modern HDMI splitters support 3D content, but you should check the product specifications or manual to confirm this feature for the NHDMI4-SP-0104.
How far can the HDMI signal be extended using this splitter?
The signal extension distance can depend on factors such as cable quality and signal strength. HDMI signals can generally be extended up to 50 feet (15 meters) or more using good quality cables.
Can I use this splitter for presentations in a business setting?
Yes, the NHDMI4-SP-0104 can be used for presentations to display content on multiple screens simultaneously.
Does the splitter come with HDMI cables?
Most HDMI splitters do not include HDMI cables. You'll need to purchase appropriate HDMI cables separately.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>