Zhongshiyuan Technology Shenzhen Co LTD EH006 Bone Conduction Headphone User Manual
- June 12, 2024
- Zhongshiyuan Technology Shenzhen Co LTD
Table of Contents
Zhongshiyuan Technology
Shenzhen Co LTD EH006 Bone Conduction Headphone
User Manual
EH 006 BONE
CONDUCTIO N HEADPHONE
User Manual
Includes:
Eh006, charge cable, and user guide
Please read and follow this user guide thoroughly before using the
Eh006.
- Magnetic charging port
- – Volume down button / Previous track
- Multi-function button (Power ON/OFF, start/pause, accept/end phone calls)
- + Volume up button / Next track
- LED indicator
- Microphone
Controlling instructions
Power on: When the headset is power off, press the power button for 3
seconds, the LED blue light flashes, Prompt tone “power on;” means power on;
Power off: When the headset is power on, press and hold the power button
for 3 seconds, the red LED flashes once to power off, Prompt tone “poweroff”
means power off;
Bluetooth connection : When the headphone is Power off state, press and
hold the power button for 3 seconds to enter the pairing state, the LED
indicator flashes red and blue, and the headset prompts: Pairing; the device
(smartphone, tablet, etc.) searches for EH006 or EH-006, click to connect ;
(Note: EH 006 is w ithout M P3 function; EH -006 is w ith M P3 function)
Successful connection: When the headset is successfully connected to the
device, the blue LED light flashes for 3 seconds – down, and the headset
prompts: Connected;
Disconnected: It prompts Disconnected, and the mobile phone automatically
turns off the Bluetooth, and automatically shuts down after 10 minutes if
there is no connection (it can automatically reconnect to the last record
within 10 minutes or be searched for connection by other devices);
Pause/Play: When the music is playing, click the multi-function button to
pause, and then click the multi-function button to play;
Answer/hang up:
In incom ing call statu s: click the multi-function button to answer,
double-click the multi-function button to reject the call;
In the call state: click the multi-function button to hang up;
Volume up : click the volume up key;
Volume down: click the volume down key;
Next song: long press the volume plus key;
Previous song: long press the volume down key;
Voice assistant : there is a beep sound, the bluetooth link status,
double-click the multi-function button to enter the voice assistant, and then
double-click to exit;
Reset: After plugging in the charging cable, the headset will reset and
Principles of bone conduction shut down for charging; (press the “+.—” button
for 5 seconds to reset and then power on and enter pairing mode)—DEL
Restore factory settings: Press and hold the volume plus and minus keys
at the same time for 5 seconds to clear the pairing information in the off
state.
Low battery prompt : When the battery voltage is lower than 3.3V, the red
light flashes quickly for 0.2S interval (with voice prompt), and the battery
is turned off at the bottom.
Charging : When using the charging cable, plug the earphones into the USB
power supply. In the charging state, the LED indicator light will be on red,
and when fully charged, the red light will be off (blue light will be on).
Principles of bone conduction
Most
of the sounds we hear is the result of sound waves passing through our eardrum
to make the vibrate so that the sound waves can be conducted to the innernal
auditory ear canal;
Another way is that sound waves are transmitted directly conducted to the
innernal auditory ear canal through the vibration of the bone instead of
eardrum. This is also a way for people to hear their own voice and this sound
conduction is called bone conduction.
How to wear
Hang the headphne behind your neck with both speaker clinging to your cheekbones, after that, adjust it until you feel comfortable.
Product Specifications
Model——-EH006
Music playing time ——- Standard state: 6-8 hours
Standby time——-20 days
Charging time——2 hours
Bluetooth version——5.3
Waterproof grade——IP8
Speaker Impedance——8Ω
Microphone Sensitivity—–42 ± 2db
Product weight——-24g
Bluetooth connection distance——15 meters
Charging voltage——5v
Charging current——100mA
Protocol——–A2DP,AVRCP,HSP,HFP
Safety warning
The correct wearing position of this earphone bone conduction earphone is the
cheekbone in front of the ear. Do not put the bone conduction speaker in the
ear; listening to loud music for a long time may cause discomfort, please use
the medium or so as far as possible. volume, avoid using high volume for a
long time;
Regardless of the volume, using headphones will affect your perception of
ambient sound, so you need to pay more attention when using headphones;
Do not throw or sit on the earphones;
Headphones should be kept away from fire, water and high pressure equipment;
Not suitable for children under three years old, contains small parts;
Do not classify it as household waste, but take it to the appropriate local
recycling station for electrical and electronic equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.