SVEN 422 USB 2.0 Gaming Speaker System User Manual

SVEN 422 USB 2.0 Gaming Speaker System

Product Information

The SVEN 422 2.0 Gaming Speaker System is a USB 2.0 speaker system designed for playing music and sound in games, movies, and other audio applications. It has a built-in audio and signal cable that allows you to connect it to a PC, laptop, MP3 player, or other audio devices. The speaker system can be powered via a PC or laptop USB port or through a 5V DC power supply using the built-in USB power cable.
For technical support, visit www.sven.fi.

Product Usage Instructions

1. Ensure that the speaker system is connected to a power source. Check the correctness of the connection, the serviceability of the power supply, and the presence of power from the mains.
2. Adjust the volume control on the speaker system to increase the volume if there is no sound or if the sound is too quiet.
3. Make sure that the audio source is properly connected to the speaker system according to the connection diagram provided (refer to Fig. 2 in the user manual).
4. If the volume level is set at the minimum value, turn up the volume on both the audio source and the speaker system.
5. If there is distortion in the sound, turn down the volume on both the audio source and the speaker system.
6. If none of the above methods solve the problem, please seek professional advice at your nearest service center. Do not attempt to repair the product yourself.

Congratulations on your purchase of the SVEN speaker system!
COPYRIGHT
© SVEN PTE. LTD. Version 1.0 (12.12.2021).
This Manual and the information contained in it are copyrighted. All rights reserved.

BUYER RECOMMENDATIONS

• Unpack the device carefully. Make sure there are no accessories left in the box. Check up the device for damage; if the product was damaged during transportation, address the firm which carried out the delivery; if the product functions incorrectly, address the dealer at once.
• Shipping and transportation equipment is permitted only in the original container.
• Does not require special conditions for realization.
• Dispose of in accordance with regulations for the disposal of household and computer equipment.
• The date of manufacture of the product is indicated on the box.

PACKAGE CONTENTS

• Speaker — 1 pc
• User Manual — 1 pc
• Warranty card — 1 pc

SAFETY PRECAUTIONS

• Do not open the MSS and do not perform repairs by yourself. Service and repairs should be performed only by qualified specialists at authorized service centers. The list of authorized service centers is on www.sven.fi.
• Do not allow the circuit of wires (including the grounded ones) between the speakers, on the power amplifier or the ground, for it causes damage to the power amplifier output stage.
• Make sure that foreign objects do not get inside the holes of the GSS.
• Protect the GSS from high humidity, water and dust.
• Protect the GSS from heating: do not place it closer than 1 m from a heat source. Do not expose it to direct sunlight.
• Do not use any chemical agents for cleaning. Clean it with dry soft cloth only.
• If the GSS does not operate, unplug it and address your dealer.

TECHNICAL DESCRIPTION

• SVEN 422 2.0 Gaming Speaker System (MSS) is designed to play music and sound games, movies, etc. The MSS has a built-in audio and signal cable enabling to connect it to a PC, laptop, MP3 player and other audio devices. The MSS is powered via a PC or laptop USB port, or via a 5V DC power supply with the built-in USB power cable.

MSS special features

• USB-powered
• Front panel volume control

Speaker system description

• Volume control (fig.1)

PREPARATION AND OPERATION

• Speaker placement
• Place MSS far away from monitors and TV sets, as insignificant image distortion in these supersensitive devices is possible.

MSS Connecting

• SVEN 422 2.0 USB Gamin Speaker System can be connected to virtually any audio source: MP3 player, PC sound card, etc. (see connection diagram, Fig. 2).
• Before making any connections, make sure that the MSS power supply is disconnected. Plug the built-in 3.5 mm mini-jack signal cable into the audio output jack of your sound source (see connection diagram, Fig. 2).
• Connect the built-in USB power cable to a USB port of your PC, laptop or to a 5V DC power supply (not included).
• Turn on your audio source.
• Adjust the volume level with the knob (fig. 1).

Note:

• After finishing using the MSS, mind switch it off.

TROUBLESHOOTING

the correctness of the connection, the serviceability of the power supply, the presence of power from the mains.
No sound.| The volume level is set at minimum value.| Turn up the volume.
Improperly connected

audio source.

| Connect the source to the speaker according to the connection diagram (fig. 2).
There is too quiet sound of speakers.| The volume level is set at minimum value.| Turn up the volume.
Distortion of sound.| Large amplitude of the input signal.| Turn down the source volume and MSS volume.

If none of the above methods can solve the problem, please seek professional advice at your nearest service center. Never attempt to repair the product yourself.

TECHNICAL SPECIFICATIONS

Notes:

• Technical specifications given in this table are supplemental information and cannot give occasion to claims.
• Technical specifications and package contents are subject to change without notice due to the improvement of SVEN production.
• www.sven.fi

USB 2.0 Gaming Speaker System

• Model: SVEN 422
• Importer: Tiralana OY, Office 102, Kotolahdentie 15, 48310 Kotka, Finland.
• Manufacturer: SVEN PTE. LTD, 176 Joo Chiat
• Road, № 02-02, Singapore, 427447.
• Produced under the control of Oy Sven Scandinavia
• Ltd. 15, Kotolahdentie, Kotka, Finland, 48310. Made in China.
• ® Registered Trademark of Oy SVEN
• Scandinavia Ltd. Finland.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>