Buster Punch SGU10 Smart Exhaust Bulb User Manual

: June 12, 2024
: BUSTER Punch

Table of Contents

SGU10 Smart Exhaust Bulb
SPECIFICATIONS
FINISH & SKU NUMBERS
FCC WARNING
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

product.
SMART EXHAUST BULB / 120V

SGU10 Smart Exhaust Bulb

[ smart. ENABLED. ] [ finish. WHITE. ] [ fitting. GU10. ] [ power. 5W. ] [ region. NORTH AMERICA. ]

An Exhaust bulb with Zigbee smart home compatibility and GU10 fitting for use with our Exhaust lighting collection. It features a robust polymer shell, with laser etched Buster + Punch insignia. This bulb can integrate with smart home projects via any Zigbee 3.0 compatible hub.

[ type. DIMMABLE & TUNABLE WHITE LED. ] [ info. MEASUREMENTS. ]

SPECIFICATIONS

An Exhaust Bulb with Zigbee compatibility and a GU10 fitting. Designed to work with the Buster + Punch smart hub or any Zigbee 3.0 compatible hub (e.g. Amazon Echo 4th generation).
Works with Amazon Alexa and Google Home via a compatible hub.
IMPORTANT: This bulb provides its own smart dimming and is not compatible with dimming lighting circuits. Brightness level and White temperature are precisely controllable via the Buster + Punch Hub & App. Compatible with other Zigbee standard 3.0 hubs and apps. For indoor use only.
Protocol: Zigbee
Power: 5W (5.5W Max, 0.1W Standby)
Type: Dimmable & Tunable White LED
Material: Polymer
Screw fitting: GU10
Supply: 120 V 60 Hz
Lumen: max 300
Light appearance: 2700k-6500k
CRI: 80
Power factor: 0.5
Beam Angle: 30 degrees
Certification: FCC SDOC+ID, Cetus

FINISH & SKU NUMBERS

[ finish. ] [ North America. ] White : NSM-013050
NOTE
For setup of this smart bulb, refer to your smart home Zigbee hub guide, e.g. the B+P hub and app here (www.busterandpunch.com, URL TO BE UPDATED).
To perform a factory reset of the bulb and restart Zigbee set-up, turn the bulb off and on six times as per the troubleshooting guide here (www.busterandpunch.com, URL TO BE UPDATED).

Risk of electric shock – do not use where directly exposed to water.
Do not use with standard dimmers.

THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS
NE CONVIENT PAS AUX SORTIES DE SECOURS
Only use a stable 120v supply to power this bulb. This bulb will not operate when connected to a dimmer or dimmable lighting circuit.

FCC WARNING

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC RADIATION EXPOSURE STATEMENT
This equipment should be installed and operated with minimum distance 20cm between the radiator your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.