LUTEC 7632406053 Outdoor Sensor and Video Floodlight User Manual
- June 12, 2024
- LUTEC
Table of Contents
7632406053 Outdoor Sensor and Video Floodlight
User Manual
libra 7632406053
User manual
Hello, nice to meet you we are
Thank you ! For your purchase.
7632406053 Outdoor Sensor and Video Floodlight
Technical Data
Supply Voltage: | 220-240 V~, 50/60 Hz |
---|---|
Bulb Type: | LED (36W) |
The light source is only exchangeable by a professional.
NON-REPLACEABLE LIGHT SOURCE REPLACEABLE GEAR CONTROL BY A PROFESSIONAL
| Conformity with all relevant EC Directive requirements.
IP44| Splash-proof
|
Class I product, must be connected to earth.
| Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or
local store for recycling advice.
Safety Instructions
-
You can consult the Safety Instructions on our website: www.lutec.com/service/safetyinstructions
-
Please scan the QR code underneath. For your convenience you can find these Safety Instructions also in the box.
-
This product is fully compliant to the ERP Regulation (EU) 2019/2020 and Amending Regulation (EU) 2021/341.
-
This product contains a light source of energy efficiency class
.
Warranty Conditions
All LUTEC products meet the highest quality requirements and have been subjected to strict quality control. The product are designed, produced and tested in accordance with International & European safety standards. LUTEC Europe NV, Herentalsebaan 425, B-2160 Wommelgem – Belgium (“LUTEC Europe”) will grant an operational warranty under the following terms and conditions:
-
The warranty period for LUTEC products is 5 years ( 2 years for products within the Solar Energy ranges) and starts on the date of purchase. LUTEC offers an extra 15 year anti-corrosion guarantee on all galvanized and resin outdoor luminaires.
-
The guarantee applies to all LUTEC indoor & outdoor lighting purchased within the European Union and/or Switzerland whose packaging is labelled accordingly. Excluded are replaceable bulbs, batteries, starters and other wear & tear parts and consumables. The products are guaranteed against material, manufacturing or design fault whereby the scientific and technical state of the art applicable at the time the products were manufactured is relevant.
-
LUTEC Europe can either repair or replace the product or refund the consumer the purchase price. We will replace the old product with a new product of the same model, type and quality free of charge. If the product purchased is no longer manufactured at the time we are notified of the fault, LUTEC Europe will supply a similar product. We do not refund assembly and disassembly costs, transport costs and other expenses, postage fees and similar costs. Furthermore, the guarantee does not include compensation for damage due to interruption of operation, loss of damage, wasted expenditure, installation and removal costs, etc. We cannot be held liable for transport damage or transport loss.
-
The guarantee only applies if:
• the products are used as intended;
• no Unauthorised adjustments/modifications are made to the product by a third party;
• the products are maintained and cared for as specified in the operating instructions;
• the lights are mounted and installed in accordance with LUTEC’s installation instructions;
• the replaceable bulbs comply with the standards applicable to such replaceable bulbs and are specifically approved for the intended use (rating plate, installation/assembly instructions);
• the product surfaces do not display any signs of chemical or physical damage caused by improper handling (e.g. use of unsuitable cleaning agents or sharp objects). -
In case of warranty, please contact your local dealer/seller from whom you have purchased the product or LUTEC Europe directly. The contact details of the local LUTEC partners can be found on www.lutec.com. The dealer/seller and/or LUTEC Europe must be promptly notified of any defect/fault within 30 days of finding the fault, otherwise we will not recognize the claim. To make a claim under the warranty, submit the proof of purchase, including the date of purchase and the product model number.
-
Statutory warranty rights remain unaffected by and apply in addition to this guarantee. The same applies to claims against the seller.
-
Full address of the guarantor: LUTEC Europe NV Herentalsebaan 425 B-2160 Wommelgem – Belgium
Telephone: : +32 (0)3 284 51 62
Email: info@lutec-europe.com info@lutec.com
www.lutec.com www.lutec.com/warranty
Installation
Installation 2
Installation 3
Download the free LUTEC connect App
https://lutec.com/services/software-1
Download the free APP.
Sign up & log in
Set-up
1 – Register 2 – Register a new account 3 – Log in 4 – Home interface 5 – Device auto detect 6 – Add new device 7 – Enter Wi-Fi password 8 – Bluetooth search and connect 9 – Confirm selection 10 – Ready for use
Smart speaker
With additional voice control Gateway – Sold separately
Please first connect with Access Box.
Personal Settings & Support
Tutorials & Help
https://www.lutec-connect.world/
www.lutee-connect.world
SD Card Replacement
Manual Reset
Please reset the device first if you want to pair or change the smart phone. If the device is already connected to a smartphone, please reset the device first to pair/connect a new smartphone.
Maintenance
Clean the camera and sensor regularly with a damp cloth(Do not use cleaning agents).
Bluetooth mesh technology
Easy Connection
Bluetooth® technology, the global standard for simple, secure wireless connectivity, now supports mesh networking. The new mesh capability enables many-to-many device communications and is optimized for creating mid to large- scale device networks. Bluetooth mesh allows you to solve more complex range and distance problems.
Legal Notes
Please check the local legislation concerning outdoor video recording around
your house and private property. It’s possible that specific laws in your
country stipulate restrictions of video recording of areas outside your home
or private grounds.
LUTEC will not accept any liabilities in case there are missing or incorrect
notifications and video’s.
Have fun with your new lighting
LUTEC Europe NV
Herentalsebaan 425
B-2160 Wommelgem
Belgium LUTEC UK Ltd
110 Brooker Road
EN9 1JH Waltham Abbey
United Kingdom
LUTEC China Head Office
CN8, Far-East Industry Park
Yuyao,Zhejiang China
DESIGNED IN EUROPE, MADE IN CHINA +32 3 284 51 62
info@lutec-europe.com
www.lutec.com
www.lutec.com/services/global-network
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>