graham-field 7150 Bariatric Recliner Instruction Manual

Series 7150 Bariatric Recliner
Series 7155 Bariatric Recliner

ASSEMBLY AND OPERATING
INSTRUCTIONS
SAVE THIS MANUAL FOR FUTURE USE.
GD_7150-7155-INS-LAB-RevA23
GD_7150-7155-INS-LAB-RevA23
www.gendroninc.com

INTRODUCTION

This manual contains assembly, operation, and maintenance instructions for the Gendron Bariatric Recliners Series. Read the entire manual carefully before using your recliner, and refer to it during use if you have questions. If you have further questions, please call GF Products, Inc. (“Graham-Field”) / Gendron Technical Support at 1.770.368.4700.
INTENDED USE
Gendron Bariatric Recliners are intended to make the care, treatment and recovery of patients easier and more comfortable. Gendron Bariatric Recliners are used in a wide range of healthcare applications including Dialysis, Oncology, Drug Delivery, Same Day Surgery and Post-Operative Recovery. Gendron Bariatric Recliners are ideal for use in hospitals, clinics and rehabilitation centers.
Gendron Series 7150 and 7155 Bariatric Recliners support patient weights up to 850 lb (385.6 kg), EVENLY DISTRIBUTED.
IMPORTANT SAFETY PRECAUTIONS—PLEASE READ BEFORE USE
The safety statements presented in this chapter refer to the basic safety information that the user must pay attention to and abide by. There are additional safety statements in other chapters
or sections, which may be the same as or similar to the following, or specific to the operations.
Please note the following special statements, used throughout this manual, and their significance:
WARNING: Indicates a potential hazard situation or unsafe practice that, if not avoided, could result in death or serious personal injury.
CAUTION: Indicates a potential hazard or unsafe practice that, if not avoided, could result in minor or moderate personal injury.
NOTICE: Indicates a potential hazard or unsafe practice that, if not avoided, could result in product or property damage.
Info: Provides application recommendations or other useful information to ensure that you get the most from your product.
WARNINGS
WARNING: Read this entire manual before assembly or operation.
WARNING: Periodically inspect all parts and replace as needed.
WARNING: Do not use near an open flame, as the chair could be a combustion source, resulting in fire, property damage, and severe physical injury.
WARNING: Service and repair of the Gendron Series 7150 and 7155 Bariatric Recliner must be performed by a Graham-Field authorized distributor. GF Health Products, Inc. (“GF”) is not responsible for any consequence resulting from any unauthorized service or repair.
WARNING: This product has a maximum weight capacity of 850 lb (385.6 kg), EVENLY DISTRIBUTED.
**WARNING: Casters must be locked at all times to prevent unwanted movements.
WARNING: Unauthorized modifi cation of your recliner or the use of non- Gendron replacement parts may change the structure of the recliner and could create a hazardous condition, which may result in serious injury and will void the warranty.
WARNING:** GF Health Products, Inc. specifi cally disclaims responsibility for any bodily injury or property damage which may occur during any use which does not comply with federal, state or local laws or ordinances.

ASSEMBLY

UNPACKING

1. Check for obvious damage to the carton or its contents. If damage is evident, please notify the carrier and your Graham-Field authorized distributor.
2. Carefully remove all packaging materials from recliner. PRODUCT DESCRIPTION

OPERATION

CASTERS
WARNING: Casters must be locked at all times to prevent unwanted movements.
Locking casters: Each Gendron Bariatric Recliner features four total locking casters. To activate the lock, simply press down on the actuator tab until it locks. To release the lock, press on the raised portion of the actuator tab until the lever is back in the normal operating position. ****

RECLINER OPERATION
The Gendron Series 7150 and 7155 Recliners feature infi nite positions for patient comfort.
The infi nite recline positions must be activated by a caregiver. The recline Adjustment Lever is located at the rear of the Recliner on the push handle for easy caregiver access.

GAS SPRING TROUBLESHOOTING GUIDE

Info: The gas spring has been pre-adjusted at the factory.
The gas spring on your recliner provides counterbalancing forces, and is self- locking for infi nite, precise positioning. Unlocking the gas spring is controlled by actuating the lever located on the push handle on the back of the recliner, shown on page fi ve.
When the lever is actuated it pulls on the cable which in turn pulls on a hinge, depressing a button at the end of the gas spring rod. If the gas spring does not unlock when the lever is actuated or if it remains permanently unlocked when the lever is actuated, the cable must be adjusted.

Adjusting Cable Tension

1. Remove the top gas spring pin from the recliner by disassembling the bridge pin and the clevis pin that secure the gas spring to the back / frame.

2. Loosen the lock nut on the gas spring.

3. Hold the hinge assembly while turning the gas spring until the cable becomes taut. Back off the gas spring an additional half turn.
   Info: If the gas spring was not unlocking when the lever was actuated, the gas spring must be turned clockwise. If the gas spring was not locking when the lever was released, the gas spring must be turned counter-clockwise.

4.  Retighten the lock nut.

5. Reassemble the gas spring to the back of the recliner by replacing the clevis pin, bridge pin.

6.  Actuate the recliner in accordance with the operating instructions to verify correct adjustment.

CARE AND MAINTENANCE

WARNING: Inspect all components periodically and replace as needed.
EVERY THREE MONTHS

• Check and clean casters.
• Tighten bolts in each leg that secure casters into frame.
• Check brakes on casters.
• Check and clean lock recline mechanism.
• Check recliner mechanism for operation in all positions with assistant seated in recliner.

UPHOLSTERY MAINTENANCE AND STAIN REMOVAL

• Ordinary dirt: wash with warm water and a mild soap or detergent.
• Stubborn dirt: using a soft bristle brush, wash with warm water and a mild soap or detergent.
• Ground-in dirt: scrub with powdered cleanser or similar detergent.
• Chewing gum: scrape carefully; remove with kerosene or naphtha.
• Nail polish and remover: Blot immediately to prevent damage.
• Ball point pen: blot immediately with a white cloth dampened in water or mineral oil.
• Paint, shoe polish, heel marks: remove immediately! Use a white cloth dampened in kerosene, naphtha or turpentine. Do not use paint remover or liquid brush cleaners.
• Tars, asphalt, creosote: remove to prevent staining. Clean area with kerosene or naphtha.
  WARNING: When using kerosene or naphtha, do so in a well ventilated area and keep it away from fire, flame, and recliner occupant.
  WARNING: Never use the following: Solvents like paint thinner, Varsol, acetone, whiteners, waxes, silicones or detergents and/or cleaning products that are not pH neutral.
  WARNING: Never use cleaning tools like plastic or wire sponges, or hard- bristle brushes that can damage the material permanently.

UPHOLSTERY CARE AND CLEANING GUIDE — ADVANCED VINYL PROTECTION

• We recommend cleaning at least once a week to extend the lifespan of the upholstery, preventing dirt and contamination from building up and stains from becoming permanent. Clean the whole surface in circular motions using liquid hand soap and water (1 part soap to 9 parts water). Rinse and wipe with a clean damp white cloth to get rid of any excess soap.
  Repeat as needed and then let dry. Once a month, you can use a soft-bristle brush for a deeper cleaning. Remember, light colors need more care, more often. For a list of approved cleaning check the guide for recommended cleaning products.

• If you need to disinfect the upholstery because it has come into contact with organic material (blood, urine or faecal matter).

1. Clean with a clean white cloth or fabric. If you choose to use a bleach solution, only use 0.5% concentration, which can be prepared as follows: Dilution: 1 part bleach per 10 parts of water.
2. Rinse and wipe with a clean damp cloth or fabric to get rid of any excess.
3. Dry.

This information is not a guarantee and does not relieve the user from the responsibility of the proper and safe use of the product and all cleaning agents. The use of certain agents can be harmful to the surface appearance and lifespan of vinyl. Spradling, its agents, and assigns assume no responsibility resulting from the use of such cleaning agents to the vinyl. Please check compatibility when using this product in combination with painted or varnished surfaces.
Spradling International is not sponsored by, affiliated with, or endorsed by such trademark owners.
CDC RECOMMENDATIONS
CLEANING AND DISINFECTING STRATEGIES FOR ENVIRONMENTAL SURFACES IN PATIENTCARE AREAS FOR VINYL UPHOLSTERY, WALL COVERINGS AND FLOORING

• Select EPA-registered disinfectants, if available, and use them in accordance with the manufacturer’s instructions.
• Do not use high-level disinfectants / liquid chemical sterilants for disinfection of either noncritical instruments and devices or any environmental surfaces; such use is counter to label instructions for these toxic chemicals.
• Follow manufacturers’ instructions for cleaning and maintaining noncritical medical equipment.
• In the absence of a manufacturer’s cleaning instructions, follow certain procedures:
• Clean noncritical medical equipment surfaces with a detergent / disinfectant.
• Do not use alcohol to disinfect large environmental surfaces.
• Use barrier protective coverings as appropriate for noncritical surfaces that are:
• Touched frequently with gloved hands during the delivery of patient care.
• Likely to become contaminated with blood or body substances.
• Difficult to clean (e.g., computer keyboards).
• Keep housekeeping surfaces (e.g., floors, walls, tabletops) visibly clean on a regular basis and clean up spills promptly.
• Use a one-step process and an EPA-registered hospital detergent / disinfectant designed for general housekeeping purposes in patient-care areas where:
• Uncertainty exists as to the nature of the soil on the surfaces (whether it is blood or body fluid or just normal dust or dirt).
• Uncertainty exists regarding the presence of multi drug resistant organisms on such surfaces.
• Detergent and water are adequate for cleaning surfaces in non patient-care areas (e.g., administrative offices). Clean and disinfect high-touch surfaces on a more frequent schedule than minimal-touch housekeeping surfaces. Clean walls, blinds, and window curtains in patient-care areas when they are visibly dusty or soiled.
• Do not perform disinfectant fogging in patient-care areas.
• Avoid large-surface cleaning methods that produce mists or aerosols, or disperse dust in patient-care areas.
• Follow proper procedures for effective uses of mops, cloths, and solutions.
• Prepare cleaning solutions daily or as needed, and replace with fresh solution frequently according to facility policies and procedures.
• Change the mop head at the beginning of each day and also as required by facility policy, or after cleaning up large spills of blood or other body substances.
• Clean mops and cloths after use and allow to dry before reuse; or use single-use, disposable mop heads and cloths.
• When performing low- or intermediate-level disinfection of environmental surfaces in nurseries and neonatal units, avoid unnecessary exposure of neonates to disinfectant residues on these surfaces by using EPA-registered germicides in accordance with manufacturers’ instructions and safety advisories.

DISPOSAL AND KEY TO SYMBOLS

DISPOSAL
Gendron Recliner equipment and accessories can be disposed of.
We recommend disassembling and dividing the equipment and components into different waste groups such as: metal, cable, electronic, recoverable resource and plastic for recycling or combustion.
Most plastic components are provided with a plastic types code and fiber content to aid sorting of plastic parts.

Product| Metal Scrap| Cable Scrap| Electronic Scrap| Plastic Recycling or Combustion
---|---|---|---|---
7150| X| X| N/A| X
7155| X| X| N/A| X

KEY TO SYMBOLS

The following symbols are used on Gendron Recliner product labels.

TECHNICAL SPECIFICATIONS

| 7150| 7155
---|---|---
Overall Width| 38.25″ (97.16 cm)| 34.25″ (87 cm)
Seat Width| 29.25″ (74.30 cm)| 25.25″ (64.14 cm)
Seat Depth| 19.25″ (48.90 cm)| 19.25″ (48.90 cm)
Maximum Weight Capacity| 850 lb (385.55 kg), EVENLY DISTRIBUTED| 850 lb (385.55 kg), EVENLY DISTRIBUTED

For complete technical specifi cations, please call the Graham-Field Technical Support Group at 1.770.368.4700.

LIMITED WARRANTY

SCOPE OF WARRANTY
GF Health Products, Inc. (“GF”) warrants to the original purchaser only that it will replace or repair components, at GF’s sole discretion, that are defective in material or workmanship under normal use and service. All warranties are conditioned upon the proper use of the products strictly in accordance with good commercial practice and applicable GF instructions and manuals, including proper use and maintenance. To the extent that a component is warranted by a third party, GF conveys all of its rights under that warranty to the original purchaser, to the extent permitted.
This limited warranty shall only apply to defects that are reported to the appropriate party listed in the OBTAINING WARRANTY SERVICE section that follows, within the applicable warranty period and which, upon examination by GF or its authorized representative, prove to be a warranty item. This limited warranty is not transferable.
Within the guidelines set forth in this document, the following components are warranted for the time period set forth below:
Steel Frame: ………………………………..three (3) years
Mechanical Components: …….three (3) years
Casters: ………………………………………….one (1) year
Upholstered Components: ….one (1) year
Replacement Parts: …………………Ninety (90) Days

• Labor is not included in the warranty.
  † Upholstery is only warranted on material supplied by GF.
  ‡ The warranty period is as designated above. If a part is replaced under warranty, the original warranty period will not be affected. All other replacement parts will be subject to the warranty period specified.
  The applicable warranty period shall commence from date of shipment to the original customer, unless there is an expiration date on the component in which case the warranty shall expire on the earlier of warranty period or the expiration date.
  OBTAINING WARRANTY SERVICE
  Customers located in the United States who wish to report a warranty issue, must contact GF directly by calling 1.770.368.4700 or by e-mailing a request to cs@grahamfield.com.
  Customers located outside the United States who wish to report a warranty issue, must contact the Distributor from whom they purchased the products.
  In both cases, further directions will be provided once the initial contact is made. This limited warranty shall only apply to defects that are reported within the applicable warranty period. Failure to abide by the specific directions will result in denial of the warranty claim.
  EXCLUSIONS
  The warranty does not cover and GF shall not be liable for the following:

  1. Defects, damage, or other conditions caused, in whole or in part, by misuse, abuse, negligence, alteration, accident, freight damage, tampering or failure to seek and obtain repair or replacement in a timely manner;
  2. Products which are not installed, used, or properly cleaned and maintained as required in the official manual for the applicable product;
  3.  Products considered to be of a non-durable nature including, but not limited to: filters, fuses, gaskets, lubricants, and charts;
  4.  Accessories or parts not provided by GF;
  5. Matching of color, grain or texture except to commercially acceptable standards;
  6. Changes in color caused by natural or artificial light;
  7. Charges by anyone for adjustments, repairs, replacement parts, installation or other work performed upon or in connection with such products which are not expressly authorized in writing, in advance, by GF;
  8. Any labor or shipping charges incurred in the replacement part installation or repair;
  9. Costs and expenses of regular maintenance and cleaning; and
  10.  Representations and warranties made by any person or entity other than GF.

ENTIRE WARRANTY, EXCLUSIVE REMEDY AND CONSEQUENTIAL DAMAGES DISCLAIMER THIS WARRANTY IS GF’S ONLY WARRANTY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. GF MAKES NO IMPLIED
WARRANTIES OF ANY KIND INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IF ANY MODEL OR SAMPLE WAS SHOWN TO THE CUSTOMER, SUCH MODEL OR SAMPLE WAS USED MERELY TO ILLUSTRATE THE GENERAL TYPE AND QUALITY OF THE PRODUCT AND NOT TO REPRESENT THAT THE PRODUCT WOULD NECESSARILY CONFORM TO THE MODEL OR SAMPLE IN ALL RESPECTS. THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PARTS. GF SHALL NOT BE LIABLE FOR AND HEREBY DISCLAIMS ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT LIMITED TO: DAMAGES FOR LOSS OF PROFITS OR INCOME, LOSS OF USE, DOWNTIME, COVER, OR EMPLOYEE OR INDEPENDENT CONTRACTOR WAGES, PAYMENTS AND BENEFITS.. CERTAIN STATES MAY CONFER ADDITIONAL RIGHTS REGARDING WARRANTIES AND IN THOSE STATES GF’S LIABILITY AND THE LIABILITY OF GF’S SUPPLIERS, SHALL BE LIMITED TO THE FULLEST EXTENT PERMITTED BY LAW.
The warranties contained herein, together with GF’s current Terms and Conditions, contain all the representations and warranties with respect to the subject matter of this document, and supersede all prior negotiations, agreements and understandings with respect thereto. The recipient of this document hereby acknowledges and represents that it has not relied on any representation, assertion, guarantee, warranty, collateral contract or other assurance, except those set out in this document.
For additional information on this product or this warranty, please contact a GF Customer Service Representative.
NOTES:

1. Additional terms and conditions may apply. See GF’s General Terms and Conditions on its website: www.grahamfield.com.
2. Freight claims must be notated on the appropriate shipping documents and must be made with immediacy. International, federal and state regulations govern specific requirements for freight claims. Failure to abide by those regulations may result in a denial of the freight claim. GF will assist you in filing the freight claim.
3. Claims for any short shipment must be made within three (3) days of the invoice date.

Manufactured By:
GD_7150-7155-INS-LAB-RevA23
GF Health Products, Inc.
One Graham-Field Way, Atlanta, GA 30340
© 2023, GF Health Products, Inc. All Rights Reserved.
Gendron is a trademark of GF Health Products, Inc.
Made in U.S.A.
www.gendroninc.com 
www.grahamfield.com
+1 770.368.4700
Information contained herein is subject to change without notice.
The most current and complete product information can be found on our website.

References

• Home | Gendron
• Graham-Field | Home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>