2N 01935-001 Indoor Compact Answering Units User Guide

2N 01935-001 Indoor Compact Answering Units

Product Information

The product is a residential intercom system designed forvillas, residential complexes, condominiums, and luxury residences. It features intuitive controls, even for inexperienced users,making it easy to accept calls, open doors, display missed calls, and switch to silent mode. The interface consists of large, color backlit buttons for easy operation. The device has a designer surface made of tempered glass and can be configured via a web interface.
It offers various features and benefits, including:

• Display of date and time in idle mode
• Parental lock to prevent accidental access
• Do not disturb mode to switch off the ringtone

The product has technical parameters such as power supply type(12VDC adapter or PoE 802.3af), recommended power supply (12V/1A),reverse polarity protection, user interface controls (7 capacitive buttons with RGB LED backlighting), audio capabilities (integrated microphone and speaker), induction loop output, supported audio codecs (G.711, G.729, G.722, L16/16kHz), video display (4.3″ display with a resolution of 480 x 272 pixels), supported video codecs (H.264, H.263, MJPEG), LAN interface (10/100BaseT with RJ-45 Cat5e or higher cabling), doorbell input type (switching contact), mechanical properties (dimensions, weight, operating temperature, humidity, recommended altitude).

Product Usage Instructions

To use the product, follow these instructions:

1. Connect the power supply to the device using a 12VDC adapter or PoE 802.3af.
2. Ensure the power supply has reverse polarity protection.
3. Use the 7 capacitive buttons with RGB LED backlighting to operate the device. Press and hold the RESET button to restore factory settings.
4. To activate the parental lock, press and hold the buttons.
5. To switch off the ringtone, activate the “Do not disturb” mode. You can do this instantly or set pre-set time intervals.
6. The device supports various audio codecs, including G.711, G.729, G.722, and L16/16kHz. It has an integrated microphone and speaker for audio communication.
7. The video display is a 4.3″ screen with a resolution of 480 x 272 pixels. It supports video codecs such as H.264, H.263, and MJPEG.
8. For LAN connectivity, use a 10/100BaseT interface with RJ-45 Cat5e or higher cabling.
9. The device has a doorbell input that supports switching contact (button/relay) with normally open (NO) parameters up to 50V/5mA, DC.
10. Ensure the device is placed within the recommended operating temperature range of 10 to 90% (non-condensing) relative humidity.
11. The recommended altitude for usage is 0 to 2000 meters.

2N® Indoor Compact

The 2N® Indoor Compact is an indoor answering unit designed especially for the residential market. Installation by connecting a single UTP cable and configuration via a web interface guarantees that integrators can put the unit into operation quickly and easily. Users will be impressed by the minimalist design, tempered glass surface, 4.3” colour display and intuitive controls. A simply elegant solution for video communication.

• Villas
• Residential complexes
• Condominiums
• Luxury residences

Intuitive controls, even for inexperienced users

Accepting calls, opening doors, displaying missed calls or switching to silent mode has never been easier. Large, colour backlit buttons make the interface intuitive and easy to operate.

Designer surface made of tempered glass
The upper 3mm glass is chemically strengthened at 420°C in a salt bath, providing maximum durability and protecting it from scratches and impacts during everyday household use.

Configuration via a web interface
Creating a device directory or upgrading firmware in all installed 2N® Indoor Compact units can be done either locally or remotely via the unit’s web interface.

FEATURES & BENEFITS

• Connection of the unit in a matter of seconds
  The structured cabling typical in houses today makes it possible to simply plug the 2N® Indoor Compact straight into the system. Powering the device via PoE and communication are ensured immediately.

• HD quality sound with noise suppression
  The 2N® Indoor Compact offers the perfect experience when communicating with visitors. It uses a G.722 HD audio codec and unique speaker output and system to suppress ambient noise.

• Switching video between internal and external cameras
  When accepting a call on the 2N® Indoor Compact, it is possible to switch from the intercom’s camera to video from an external IP camera by the entrance. Make sure that only the person you want to let in enters the building.

• Backup of answering unit settings
  After successfully setting up the 2N® Indoor Compact, back up the complete configuration in case the settings need to be restored or duplicated for a new answering unit.

• Display of date and time in idle mode
  It’s easy to prevent your children from accidentally letting strangers into your home when playing. Simply press and hold the buttons to activate a parental lock.

• “Do not disturb” mode
  Activate the “Do not disturb” mode to switch off the ringtone at once or at pre-set time intervals. Use this option when you need absolute peace and quiet.

DIAGRAM

TECHNICAL PARAMETERS

Power supply

• Type 12VDC +/-10% adapter or PoE 802.3af
  Recommended

• power supply 12 V / 1 A

• Reverse polarity protection yes

User interface

• Controls 7 capacitive buttons with RGB LED backlighting
• Operation Press and hold the RESET button to restore factory settings, 3 LED status indicators

Audio

• Microphone integrated
• Speaker integrated, 2W
• Induction loop output 600 mV RMS
• Codecs G.711, G.729, G.722, L16/16kHz

Video

• Display 4.3” display, resolution 480 x 272 pixels
• Codecs H.264, H.263, MJPEG

Interface

• LAN 10/100BaseT, RJ-45
• Recommended cabling Cat5e or higher

Doorbell Input

• Input type switching contact (button/relay)
• Contact type normally open (NO)
• Contact parameters up to 50V/5mA, DC

Mechanical properties

• Dimensions (W x H x D) 152 x 153 x 50mm
• Weight 387 g
• Operating temperature 0 to 50 °C
• Relative operating humidity 10 to 90 % (non-condensing)
• Storage temperature -20 to 70 °C
• Recommended altitude 0 to 2000 m

HARDWARE & SOFTWARE

• 2N® IP Verso – modular security intercom for discerning customers
• 2N® IP Solo – compact IP intercom ideal for Home Automation
• 2N® IP Force – the toughest IP Intercom in the world
• 2N® IP Vario – a variable intercom with an elegant design
• 2N® IP Base – stylish IP Intercom with high-quality audio and video
• 2N® Mobile Video – mobile application providing video calls from the intercom to your mobile device

2N TELEKOMUNIKACE a.s., Modřanská 621, 143 01 Prague 4, CZ, +420 261 301 500, sales@2n.cz, www.2n.cz

References

• 2N - a Global Leader in IP Intercoms and Access Control - 2N

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>