ACROMA 10588DRAZ Agen 20-Light Driftwood Farmhouse LED Dry Rated Chandelier Instruction Manual

ACROMA 10588DRAZ Agen 20-Light Driftwood Farmhouse LED Dry Rated

Chandelier

Product Information

This product is a lighting fixture that requires installation. It comes with all the necessary hardware included, such as electrical tape, 20 x Max 40W Candelabra Base, a green ground screw, outlet box screws, wire connectors, chain end loops, socket sleeves, and a connector ring. The fixture is designed to be mounted on the ceiling and requires electrical connections.

Safety Information

Before starting the installation or removing a previous fixture, it is important to disconnect the power by turning off the circuit breaker, removing the fuse at the fuse box, or tripping the breaker that controls that circuit. It is recommended to tape a sign to the panel warning others to leave the circuit alone while you work. If you have any electrical questions, it is advised to consult a qualified electrician. For non-electrical questions, please contact our customer service via the distributor where you purchased this product from.

Product Usage Instructions

1. Pre-Installation:

   • Read all instructions before installing.
   • Place the product on a soft, non-abrasive surface, such as carpet or cardboard to avoid damaging it.

2. Tools Required (Not Included):

   • Phillips Screwdriver
   • Wire Stripper
   • Pliers
   • Safety Goggles

3. Assembly Instructions:

4. 1. First, determine the length of the stem or chain required for hanging the fixture from the ceiling.

5. Attach the mounting plate to the junction box.

6. Make all necessary electrical connections, following the provided wiring diagram:

7. Hang the fixture from the ceiling using the chain or stem.

8. Install the fixture securely.

Warranty

The manufacturer provides a warranty for this product. However, the warranty does not cover any consequential or incidental loss or damage, including labor/expense costs involved in the replacement or repair of the product. The manufacturer disclaims any warranty other than the one contained herein.
Thank you for choosing ACROMA!

Safety lnformation

READ AND SAVE THESE INSTRUCTIONS

1. For your protection and safety, carefu
2. Before touching any wire, use a voltage tester to make sure it not live.
3. When replacing fuses, turn off the main power first. Make sure your hands and feet are dryland place one hand behind your back to prevent electricity from making a complete circuit through your chest. Touch the plug fuse only by its insulated rim. Remove cartridge fuses with a fuse puller
4. Use tools with insulated handles and ladders made of wood or fiberglass.
5. To protect children place a safely cover over any unused outlets.lly read and understand the information provided in this manual completely before attempting to assemble, install or operate this product. Failure to do so could lead to electrical shock fire or other injuries that could be hazardous or even fatal.
   • DANGER: Before staring installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker, removing the fuse at the fuse box, or tripping the breaker that controls that circuit. Tape a sign to the panel warning others to leave the circuit alone while you work.
   • CAUTION:CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS. lf you have any non-electrical questions about this fixture please contact our customer service via the distributor where you purchased this product from. We will be more than happy to assist.

PLANNING INSTALLATION

• Read all instructions before installing.
• To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard.

TOOLS REQUIRED (NOT INCLUDED)

HARDWARE INCLUDED

Assembly instructions

Assembly of this fixture will be accomplished by first determining the length of stem or chain required, attaching the mounting plate to the junction box, making all necessary electrical connections, hanging the fixture from the ceiling and then installing the fixture

Safety Warning

Read wiring and grounding instruction and any additional directions. Turn power supply off during installation. If new wiring is required, consult a qualified electrician or local authorities for code requirements.

Warranty

ONE (1) YEAR WARRANTY

• WHAT IS COVERED
  The manufacturer warrants this fixture to be free from defects in materials and workmanship for a period of one (1) year from date of purchase. The warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer`s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alteration, way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear.

• WHAT IS NOT COVERED
  The manufacturer does not warrant and specifically disclaims any warranty, whether expressed or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of said product.

Thank you for choosing ACROMA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>