ACROMA 2301BGCR Elutheria 1-Light Square-Rectangle Pendant Instruction Manual

ACROMA 2301BGCR Elutheria 1-Light Square-Rectangle Pendant

Safety Information

READ AND SAVE THESE INSTRUCTIONS

1. For your protection and safety, carefully read and understand the information provided in this manual completely before attempting to assemble, install, or operate this product. Failure to do so could lead to electrical shock, fire, or other injuries that could be hazardous or even fatal.

2. Before touching any wire, use a voltage tester to make sure it not live.

3. When replacing fuses, turn off the main power firs. Make sure your hands and feet are dry, and place one hand behind your back to prevent electricity from making a complete circuit through your chest.
   Touch the plug fuse only by its insulated rim. Remove cartridge fuses with a fuse puller.

4. Use tools with insulated handles and ladders made of wood or fiberglass.

5. To protect children, place a safely cover over any unused outlets.

DANGER: Before staring installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker, removing the fuse at the fuse box, or tripping the breaker that controls that circuit. Tape a sign to the panel warning others to leave the circuit alone while you work.

CAUTION: CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS. lf you have any non-electrical questions about this fixture please contact our customer service via the distributor where you purchased this product from.
We will be more than happy to assist.

Pre-Installation

PLANNING INSTALLATION

Read all instructions before installing.
To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or card board.

TOOLS REQUIRED (NOT INCLUDED)

• Phillips Screwdriver

• Wire Stripper

• Pliers

• Safety Goggles

• Electrical Tape

HARDWARE INCLUDED

• Canopy
  

• Crossbar assembly
  

• Outlet box screw (short) x 2
  

• Green ground screw (on mounting plate)
  

• Wire connector x 3
  

• Finial x 2
  

• Support screw (long) x 2
  

• Hexn nut x 4
  

• Flat washer x 2
  

• Chain end Loop x 3
  

• Chain x 1
  

• Connector ring x 1
  
  Package 1

• Down rod x 1
  

• Glass x 1
  

• Socket ring x 1 (on fixture)
  
  Package 2

Assembly Instructions

Assembly of this fixture will be accomplished by first determining the length of stem or chain required, attaching the mounting plate to the junction box, making all necessary electrical connections, hanging the fixture from the ceiling and then installing the fixture.

Safety Warning
Read wiring and grounding instruction and any additional directions. Turn power supply off during installation. If new wiring is required, consult a qualified electrician or local authorities for code requirements.

STEP 1

STEP 2

STEP 3

STEP 4

STEP 5

Thank you for choosing ACROMA

References

• ACROMA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>