ACROMA 9501SNCL Agen 1-Light Brushed Nickel Farmhouse LED Dry Rated Chandelier Instruction Manual

ACROMA 9501SNCL Agen 1-Light Brushed Nickel Farmhouse LED Dry Rated

Chandelier

Product Information

The product is a lighting fixture. It comes with a one-year warranty and requires a maximum 20W medium base bulb. The installation instructions provide information on pre-installation planning, tools required, safety information, and assembly guide.

Product Usage Instructions

Before starting the installation, read all the instructions provided in the manual. To avoid damaging the product, place it on a soft, non-abrasive surface like carpet or cardboard.

Pre-lnstallation

PLANNING INSTALLATION
Read all instructions before installing. To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard.

Tools Required (Not Included)

• Phillips Screwdriver
• Safety Goggles
• Wire Stripper
• Electrical Tape
• Pliers

Safety Information:

• Disconnect the power by turning off the circuit breaker, removing the fuse at the fuse box, or tripping the breaker that controls the circuit before starting the installation.
• Tape a sign to the panel warning others to leave the circuit alone while you work.
• If you have any electrical questions, consult a qualified electrician.
• If you have any non-electrical questions, contact customer service via the distributor where you purchased the product.

READ AND SAVE THESE INSTRUCTIONS

1. For your protection and safety,carefully read and understand the information provided in this manual completely before attempting to assemble,install,or operate this product.Failure to do so could lead to electrical shock,fire,or other injuries that could be hazardous or even fatal.
2. Before touching any wire,use a voltage tester to make sure it not live.
3. When replacing fuses,turn off the main power firs.Make sure your hands and feet are dry,and place one hand behind your back to prevent electricity from making a complete circuit through your chest. Touch the plug fuse only by its insulated rim.Remove cartridge fuses with a fuse puller.
4. Use tools with insulated handles and ladders made of wood or fiberglass.
5. To protect children, place a safe cover over any unused outlets.

DANGER: Before staring installation of this fixture or removal of a previous fixture,disconnect the power by turning off the circuit breaker,removing the fuse at the fuse box,or tripping the breaker that controls that circuit.Tape a sign to the panel warning others to leave the circuit alone while you work.
CAUTION: CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS. lf you have any non-electrical questions about this fixture please contact our customer service via the distributor where you purchased this product from. We will be more than happy to assist.

Warranty ONE (1) YEAR WARRANTY

WHAT IS COVERED
The manufacturer warrants this fixture to be free from defects in materials and workmanship for a period of one (1) year from date of purchase. The warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective,the manufacturer’s only obligation,and your exclusive remedy,is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alteration, way not in accordance with the instructions supplied with the product.This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product,such as surface and/or weathering,as this is considered normal wear and tear.

WHAT IS NOT COVERED
The manufacturer does not warrant and specifically disclaims any warranty, whether expressed or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of said product.

**Assembly Guide

**

The assembly of this fixture involves the following steps:

1. Determine the length of stem or chain required.
2. Attach the mounting plate to the junction box.
3. Make all necessary electrical connections.
4. Hang the fixture from the ceiling.
5. Install the fixture.

Assembly lnstructions
Assembly of this fixture will be accomplished by first determining the length of stem or chain required, attaching the mounting plate to the junction box, making all necessary electrical connections, hanging the fixture from the ceiling and then installing the fixture.

Safety Warning:

Read wiring and grounding instruction and any additional directions. Turn power supply off during installation. If new wiring is required, consult a qualified electrician or local authorities for code requirements.

• Read wiring and grounding instructions as well as any additional directions provided.
• Turn off the power supply during installation.
• If new wiring is required, consult a qualified electrician or local authorities for code requirements.

Package Contents:

• Package 1: Downrods x 5
• Package 2: Glass shade x 1
• Package 3: Bulb (not included)

HARDWARE INCLUDED

Wiring Instructions:

Follow the steps below to connect the wires:

1. Step 1: Connect the white supply wire to the white or identified fixture wire using wire nuts.
2. Step 2: Connect the black supply wire to the plain or black fixture wire.
3. Step 3: Connect the bare or green ground wire from the supply to the bare or green fixture ground wire using the green ground screw.

Thank you for choosing ACROMA

References

• ACROMA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>