ACROMA 9006AZCL Dax 53-Inch 5-Light Agedzinc LED Modern-Contemporary Vanity Light Instruction Manual
- June 12, 2024
- ACROMA
Table of Contents
ACROMA 9006AZCL Dax 53-Inch 5-Light Agedzinc LED Modern-Contemporary
Vanity Light
Product Information
The product is a lighting fixture that requires installation. It is designed to accommodate six maximum 60W medium base bulbs. The fixture comes with a one-year warranty.
Safety Information
Before starting the installation or removing a previous fixture,it is important to disconnect the power by turning off the circuit breaker, removing the fuse at the fuse box, or tripping the breaker that controls the circuit. A sign should be taped to the panel to warn others to leave the circuit alone while working.
If there are any electrical questions, it is recommended to consult a qualified electrician. For non-electrical questions about the fixture, customer service can be contacted through the distributor where the product was purchased.
Assembly Guide
The package includes all necessary hardware for assembly:
- Crossbar assembly
- Outlet box screw (short) x 2
- Green ground screw (on mounting plate)
- Wire connector x 3
- Finial x 2
- Support screw (long) x 2
- Hex nut x 4
- Flat washer x 2
- Socket sleeve x 6 (on fixture)
Product Usage Instructions
Follow these steps to install and use the product:
- Pre-Installation:
- Read all instructions before installing.
- Place the product on a soft, non-abrasive surface like carpet or cardboard to avoid damage.
- Installation:
- Determine the length of stem or chain required.
- Attach the mounting plate to the junction box.
- Make all necessary electrical connections.
- Hang the fixture from the ceiling.
- Install the bulbs (bulbs not included).
- Wiring:
- Read wiring and grounding instructions and any additional directions.
- Turn off the power supply during installation.
- If new wiring is required, consult a qualified electrician or local authorities for code requirements.
Installation Instructions
6 x Max 60W Medium Base
Safety Information
READ AND SAVE THESE INSTRUCTIONS
-
For your protection and safety, carefully read and understand the information provided in this manual completely before attempting to assemble, install,or operate this product. Failure to do so could lead to electrical shock,fire or other injuries that could be hazardous or even fatal.
-
Before touching any wire,use a voltage tester to make sure it not live.
-
When replacing fuses, turn off the main power firs.Make sure your hands and feet are dry,and place
one hand behind your back to prevent electricity from making a complete circuit through your chest.
Touch the plug fuse only by its insulated rim.Remove cartridge fuses with a fuse puller. -
Use tools with insulated handles and ladders made of wood or fiberglass.
-
To protect children,place a safely cover over any unused outlets.
DANGER: Before staring installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker,removing the fuse at the fuse box,or tripping the breaker that controls that circuit. Tape a sign to the panel warning others to leave the circuit alone while you work.
CAUTION: CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL
QUESTIONS. If you have any non-electrical questions about this fixture please
contact our customer service via the distributor where you purchased this
product from.
We will be more than happy to assist.
Pre-Installation
PLANNING INSTALLATION
Read all instructions before installing.
To avoid damaging this product, place it on a soft, non-abrasive surface, such
as carpet or cardboard.
TOOLS REQUIRED (NOT INCLUDED)
Warranty
ONE (1) YEAR WARRANTY
WHAT IS COVERED
The manufacturer warrants this fixture to be free from defects in materials
and workmanship for a period of one (1) year from date of purchase.
The warranty applies only to the original consumer purchaser and only to
products used in normal use and service.
If this product is found to be defective, the manufacturer’s only
obligation,and your exclusive remedy,is the repair or replacement of the
product at the manufacturer’s discretion,provided that the product has not
been damaged through misuse, abuse, accident, modifications, alteration, way
not in accordance with the instructions supplied with the product. This
warranty shall not apply to a failure of the product as a result of an
accident, misuse,abuse, negligence, alteration, faulty installation,or any
other failure not relating to faulty material or workmanship.
This warranty shall not apply to the finish on any portion of the product,such
as surface and/or weathering,as this is considered normal wear and tear.
WHAT IS NOT COVERED
The manufacturer does not warrant and specifically disclaims any warranty,
whether expressed or implied, of fitness for a particular purpose, other than
the warranty contained herein. The manufacturer specifically disclaims any
liability and shall not be liable for any consequential or incidental loss or
damage, including but not limited to any labor/expense costs involved in the
replacement or repair of said product.
ASSEMBLY GUIDE
Assembly Instructions
Assembly of this fixture will be accomplished by first determining the length
of stem or chain required, attaching the mounting plate to the junction box,
making all necessary electrical connections, hanging the fixture from the
ceiling and then installing the fixture.
Safety Warning
Read wiring and grounding instruction and any additional directions. Turn
power supply off during installation. If new wiring is required, consult a
qualified electrician or local authorities for code requirements.
HARDWARE INCLUDED
Thank you for choosing ACROMA