ACROMA 761241328901 Agen 6-Light Agedzinc Farmhouse LED Dry Rated Chandelier Instruction Manual
- June 12, 2024
- ACROMA
Table of Contents
ACROMA 761241328901 Agen 6-Light Agedzinc Farmhouse LED Dry-Rated
Chandelier
Product Information
The product is a lighting fixture designed for indoor use. It requires a
power supply and can support up to 6 candelabra base bulbs with a maximum
wattage of 60W each. The fixture comes with a one-year warranty.
Installation Instructions
- Read all instructions before installing. Place the product on a soft, non-abrasive surface, such as carpet or cardboard, to avoid damaging it.
- Ensure you have the following tools (not included): Phillips Screwdriver, Safety Goggles, Wire Stripper, Electrical Tape, and Pliers.
- Before starting the installation, disconnect the power by turning off the circuit breaker, removing the fuse at the fuse box, or tripping the breaker that controls the circuit. Tape a sign to the panel warning others to leave the circuit alone while you work.
- If you have any electrical questions, consult a qualified electrician. For non-electrical questions about the fixture, contact customer service via the distributor where you purchased the product.
Assembly Instructions
- Connect the side hanging rods to the wheel and wiring Chamber.
- Follow the wiring diagram provided:
- Connect the white supply wire to the white or identified fixture wire using wire nuts.
- Connect the black supply wire to the plain or black fixture wire.
- Connect the bare or green ground wire from the supply to the bare or green fixture ground wire, or to the ground wire from the supply using the green ground screw.
- Refer to the assembly guide for hardware included:
- Canopy
- Mounting plate
- Finial x 2
- Green ground screw
- Support screw (on a mounting plate)
- Wire connector x 3 (long) x 2
- Outlet box screw (short) x 2
- Hex nut x 4
- Flat washer x 2
- Chain end Loop x 2
- Chain x 1
- Connector ring x 1 (Package 1)
- Socket sleeves x 6
- Side hanging rod x 2 (Package 2)
- Follow the remaining steps in the assembly instructions, including determining the length of stem or chain required, attaching the mounting plate to the junction box, making all necessary electrical connections, hanging the fixture from the ceiling, and installing the fixture.
Safety Warning
Read the wiring and grounding instructions provided, as well as any
additional directions. Turn off the power supply during installation. If new
wiring is required, consult a qualified electrician or local authorities for
code requirements.
Safety information
READ AND SAVE THESE INSTRUCTIONS
- For your protection and safety, carefully read and understand the information provided in this manual completely before attempting to assemble, install, or operate this product. Failure to do so could lead to electrical shock, fire, or other injuries that could be hazardous or even fatal.
- Before touching any wire, use a voltage tester to make sure it is not live.
- When replacing fuses, turn off the main power first. Make sure your hands and feet are dry, and place one hand behind your back to prevent electricity from making a complete circuit through your chest. Touch the plug fuse only by its insulated rim. Remove cartridge fuses with a fuse puller.
- Use tools with insulated handles and ladders made of wood or fiberglass.
- To protect children, place a safe cover over any unused outlets.
DANGER : Before starting the installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker, removing the fuse at the fuse box, or tripping the breaker that controls that circuit. Tape a sign to the panel warning others to leave the circuit alone while you work.
CAUTION: CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS. If you have any non-electrical questions about this fixture please contact our customer service via the distributor where you purchased this product from. We will be more than happy to assist.
Pre-installation PLANNING INSTALLATION
Read all instructions before installing. To avoid damaging this product, place
it on a soft, non-abrasive surface, such as carpet or cardboard.
TOOLS REQUIRED (NOT INCLUDED)
Assembly instructions
Assembly of this fixture will be accomplished by first determining the length
of the stem or chain required, attaching the mounting plate to the junction
box, making all necessary electrical connections, hanging the fixture from the
ceiling, and then installing the fixture.
Safety Warning
Read wiring and grounding instructions and any additional directions. Turn the
power supply off during installation. If new wiring is required, consult a
qualified electrician or local authorities for code requirements.
HARDWARE INCLUDED
Warranty
The manufacturer warrants this fixture to be free from defects in materials
and workmanship for a period of one (1) year from the date of purchase. The
warranty applies only to the original consumer purchaser and only to products
used in normal use and service. If this product is found to be defective, the
manufacturer’s only obligation,andyour exclusive remedy, is the repair or
replacement of the product at themanufacturer’s discretion, provided that the
product has not been damaged through misuse, abuse, accident, modifications,
alteration, way not in accordancewith the instructions supplied with the
product. This warranty shall not apply to a failure of the product as a
result of an accident, misuse, abuse, negligence, alteration, faulty
installation, or any other failure not relating to faulty materialor
workmanship. This warranty shall not apply to the finish on any portion of the
product,suchas surface and/or weathering, as this is considered normal wear
and tear.
WHAT IS COVERED WHAT IS NOT COVERED
The manufacturer does not warrant and specifically disclaims any warranty, whether expressed or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in thereplacement or repair of said product.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>