ACROMA 2333BGCR Greenville 3-Light 15-in Satinbrass LED Semi-Flush Mount Light Instruction Manual

June 12, 2024
ACROMA

ACROMA 2333BGCR Greenville 3-Light 15-in Satinbrass LED Semi-Flush Mount

Light

Product Information

The product is a lighting fixture manufactured by Acroma. It requires a maximum of three medium base bulbs with a wattage of 60W each. The fixture comes with a one-year warranty for covered components. The manufacturer disclaims any liability for consequential or incidental loss or damage.

Installation Instructions

Before starting the installation, it is important to read all the instructions provided. To prevent damage to the product, place it on a soft, non-abrasive surface like carpet or cardboard. The following tools are required for installation (not included):

  • Phillips Screwdriver
  • Safety Goggles
  • Wire Stripper
  • Electrical Tape
  • Pliers

Ensure to disconnect the power supply before installing or removing the fixture. This can be done by turning off the circuit breaker, removing the fuse at the fuse box, or tripping the breaker that controls the circuit. A warning sign should be taped to the panel to prevent others from interfering while you work. If you have any electrical questions, consult a qualified electrician for assistance. For non-electrical inquiries, contact customer service through your product distributor.

Assembly Guide

The fixture assembly involves determining the required length of stem or chain, attaching the mounting plate to the junction box, making electrical connections, hanging the fixture from the ceiling, and finally installing it. The package includes the necessary hardware:

  • Canopy
  • Crossbar assembly
  • Outlet box screw (short) x 2
  • Green ground screw (on mounting plate)
  • Wire connector x 3
  • Finial x 2
  • Support screw (long) x 2
  • Hex nut x 4
  • Flat washer x 2
  • Glass x 3
  • Socket ring x 3 (on fixture)

Product Usage Instructions

Follow these steps to install the fixture:

Step 1

Identify the white supply wire and connect it to the white or identified fixture wire using wire nuts.

Step 2

Identify the black supply wire and connect it to the plain or black fixture wire.

Step 3

Connect the bare or green ground wire from the supply to the bare or green fixture ground wire. Use a wire nut to secure the connection. The green ground screw can also be used for grounding purposes.

Step 4

Complete the installation by following the remaining assembly instructions provided in the manual.

Safety Information

READ AND SAVE THESE INSTRUCTIONS

  1. For your protection and safety, carefully read and understand the information provided in this manual completely before attempting to assemble install or operate this product. Failure to do so could lead to electrical shock,fire,or other injuries that could be hazardous or even fatal.

  2. Before touching any wire, use a voltage tester to make sure it not live.

  3. When replacing fuses,turn off the main power firs. Make sure your hands and feet are dry,and place one hand behind your back to prevent electricity from making a complete circuit through your chest.
    Touch the plug fuse only by its insulated rim.Remove cartridge fuses with a fuse puller.

  4. Use tools with insulated handles and ladders made of wood or fiberglass.

  5. To protect children,place a safely cover over any unused outlets.

DANGER:Before staring installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker, removing the fuse at the fuse box,or tripping the breaker that controls that circuit. Tape a sign to the panel warning others
to leave the circuit alone while you work.

CAUTION: CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS.

If you have any non-electrical questions about this fixture please contact our customer service via the distributor where you purchased this product from. We will be more than happy to assist.

Pre-Installation

PLANNING INSTALLATION
Read all instructions before installing.
To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard.

TOOLS REQUIRED (NOT INCLUDED)

Warranty

ONE (1) YEAR WARRANTY

WHAT IS COVERED

  • The manufacturer warrants this fixture to be free from defects in materials and workmanship for a period of one (1) year from date of purchase.
  • The warranty applies only to the original consumer purchaser and only to products used in normal use and service.
  • If this product is found to be defective the manufacturer’s only obligation,and your exclusive remedy is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications,alteration, way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation,or any other failure not relating to faulty material or workmanship.
  • This warranty shall not apply to the finish on any portion of the product,such as surface and/or weathering,as this is considered normal wear and tear.

WHAT IS NOT COVERED
The manufacturer does not warrant and specifically disclaims any warranty, whether expressed or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of said product.

ASSEMBLY GUIDE

Assembly Instructions
Assembly of this fixture will be accomplished by first determining the length of stem or chain required, attaching the mounting plate to the junction box, making all necessary electrical connections, hanging the fixture from the ceiling and then installing the fixture.

Safety Warning
Read wiring and grounding instruction and any additional directions. Turn power supply off during installation. If new wiring is required, consult a qualified electrician or local authorities for code requirements.

HARDWARE INCLUDED

Thank you for choosing ACROMA

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

ACROMA User Manuals

Related Manuals