ACROMA 2333CL 3 x Max 60W Medium Base Instruction Manual
- June 12, 2024
- ACROMA
Table of Contents
ACROMA 2333CL 3 x Max 60W Medium Base
Product Information
This product is a lighting fixture manufactured by Acroma. It requires a maximum of 60W medium base bulbs, which are not included in the package. The fixture comes with a one-year warranty.
Installation Instructions
Pre-Installation: Before installing the fixture, it is important to
read all instructions. Place the product on a soft, non-abrasive surface, such
as carpet or cardboard, to avoid damaging it.
Tools Required (Not Included)
- Phillips Screwdriver
- Safety Goggles
- Wire Stripper
- Electrical Tape
- Pliers
Safety Information
Before starting the installation or removing a previous fixture, it is
crucial to disconnect the power by turning off the circuit breaker, removing
the fuse at the fuse box, or tripping the breaker that controls that circuit.
It is recommended to tape a sign to the
panel warning others to leave the circuit alone while working. If you have any
electrical questions, consult a qualified electrician. For non-electrical
questions about the fixture, contact customer service via the distributor
where you purchased the product.
Warranty Coverage
The manufacturer provides a one-year warranty. Please read and save the
provided instructions for future reference.
What is Covered: The warranty covers defects in materials and workmanship.
What is Not Covered: The manufacturer does not cover any consequential or
incidental loss or damage, including labor/expense costs involved in the
replacement or repair of the product. The warranty does not extend to fitness
for a particular
purpose.
Assembly Guide
Hardware Included
- Canopy
- Outlet box screw
- Crossbar assembly (short) x 2
- Green ground screw (on a mounting plate)
- Wire connector x 3
- Finial x 2
Assembly Instructions
To assemble the fixture, follow these steps:
- Determine the length of the stem or chain required.
- Attach the mounting plate to the junction box.
- Make all necessary electrical connections.
- Hang the fixture from the ceiling.
- Install the fixture.
Safety Warning
Read the wiring and grounding instructions, as well as any additional
directions provided. Turn off the power supply during installation. If new
wiring is required, consult a qualified electrician or local authorities for
code requirements.
Package Contents
Package
- Glass x 3
- Socket sleeve x 3 (on fixture)
Package
- 2333CL
Electrical Connections
Follow these steps to connect the wires:
- Connect the white supply wire with the white or identified fixture wire using wire nuts.
- Connect the black supply wire with the plain or black fixture wire.
- Connect the bare or green ground wire from the supply with the bare or green fixture ground wire.
- Make sure to tighten the connections securely.
- Use the green ground screw provided to connect the ground wire.
Safety information
READ AND SAVE THESE INSTRUCTIONS
- For your protection and safety, carefully read and understand the information provided in this manual completely before attempting to assemble, install, or operate this product. Failure to do so could lead to electrical shock, fire, or other injuries that could be hazardous or even fatal.
- Before touching any wire, use a voltage tester to make sure it is not live.
- When replacing fuses, turn off the main power first. Make sure your hands and feet are dry, and place one hand behind your back to prevent electricity from making a complete circuit through your chest. Touch the plug fuse only by its insulated rim. Remove cartridge fuses with a fuse puller.
- Use tools with insulated handles and ladders made of wood or fiberglass.
- To protect children, place a safe cover over any unused outlets.
DANGER: Before starting the installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker, removing the fuse at the fuse box, or tripping the breaker that controls that circuit. Tape a sign to the panel warning others to leave the circuit alone while you work.
CAUTION: CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL
QUESTIONS.
If you have any non-electrical questions about this fixture please contact our
customer service via the distributor where you purchased this product from. We
will be more than happy to assist.
Pre-installation planning INSTALLATION
Read all instructions before installing. To avoid damaging this product, place
it on a soft, non-abrasive surface, such as carpet or cardboard.
TOOLS REQUIRED (NOT INCLUDED)
Assembly instructions
Assembly of this fixture will be accomplished by first determining the length of the stem or chain required, attaching the mounting plate to the junction box, making all necessary electrical connections, hanging the fixture from the ceiling, and then installing the fixture. Safety Warning Read wiring and grounding instructions and any additional directions. Turn the power supply off during installation. If new wiring is required, consult a qualified electrician or local authorities for code requirements
HARDWARE INCLUDED
INSTALLATION
Warranty
ONE (1) YEAR WARRANTYWHAT IS COVERED
The manufacturer warrants this fixture to be free from defects in materials
and workmanship for a period of one (1) year from the date of purchase. The
warranty applies only to the original consumer purchaser and only to products
used in normal use and service. If this product is found to be defective, the
manufacturer’s only obligation,andyour exclusive remedy, is the repair or
replacement of the product at themanufacturer’s discretion, provided that the
product has not been damaged through misuse, abuse, accident, modifications,
alteration, way not in accordancewith the instructions supplied with the
product. This warranty shall not apply to a failure of the product as a result
of an accident, misuse, abuse, negligence, alteration, faulty installation,or
any other failure not relating to faulty materialor workmanship. This warranty
shall not apply to the finish on any portion of the product,suchas surface
and/or weathering, as this is considered normal wear and tear.
WHAT IS NOT COVERED
The manufacturer does not warrant and specifically disclaims any warranty,
whether expressed or implied, of fitness for a particular purpose, other than
the warranty contained herein. The manufacturer specifically disclaims
anyliability and shall not be liable for any consequential or incidental loss
or damage, including but not limited to any labor/expense costs involved in
thereplacement or repair of said product.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>