Florevita HS113 XPRO Straightener User Manual
- June 12, 2024
- Florevita
Table of Contents
- Florevita HS113 XPRO Straightener
- Product Information
- Product Usage Instructions
- USER MANUAL
- IMPORTANT SAFETY INSTRUCTIONS
- STORAGE
- KEEP AWAY FROM WATER
- OPERATION INSTRUCTIONS
- SET UP THE SLEEPING MODE
- SPECIFICATIONS:
- WARRANTY
- TECHNICAL PARAMETERS
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Florevita HS113 XPRO Straightener
Product Information
XPRO STRAIGHTENER
Model: HS113
Product Usage Instructions
To use the XPRO STRAIGHTENER, please follow these instructions:
- Make sure to read and understand all the safety instructions provided in the user manual.
- Before plugging in the device, ensure that the power switch is in the OFF position.
- Plug the straightener into a suitable power outlet.
- Press the ON/OFF button to turn on the device.
- Use the temperature +/- touch buttons to adjust the desired temperature.
- Wait for the LCD digital screen to display the selected temperature.
- Once the device has reached the operating temperature, you can start using it.
- To straighten your hair, take a small section of hair and place it between the plates of the straightener.
- Gently close the plates together and glide the straightener down the length of the hair.
- Repeat this process for all sections of hair until you achieve the desired result.
- After use, turn off the device by pressing the ON/OFF button.
- Unplug the straightener from the power outlet and allow it to cool down before storing it.
- Store the straightener in a safe and dry place, away from the reach of children.
Please note that these usage instructions are a general guide. For specific instructions or troubleshooting, refer to the complete user manual provided with the product.
Florevita
Fonteinstraat 2, 9890 Semmerzake, Belgium
neneh@florevita.com
Florevita.com
Manufacturer
Shenzhen Hairstorm Technology Co.,Ltd.
Address: Zhonghengxinda Indus-trial Park, Eastern Xinfa Road, Xinqiao,
Shajing Town, Bao`an, Shenzhen, China
USER MANUAL
- LCD Digital Screen
- ON/OFF and Temperature “+”/”- “Touch Button
- ION Outlet
- Plate Lock Switch
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic
safety precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING AND KEEP IT SAFETY FOR FUTURE REFERENCE
BURN HAZARD
KEEP AWAY FROM CHILDREN
THIS PRODUCT CAN BURN EYES
CAUTION
Never allow the power supply cord to be pulled or twisted. Never wrap the cord
around the unit. Damage will occur at the high flex point of entry into the
unit, causing it to rupture and short. Inspect the cord frequently for damage.
Stop using immediately if dam-age is visible or if unit stops or operates
intermittently..
STORAGE
When not in use, your appliance is easy to store. Allow unit to cool, then simply put back in the box, and store out of reach of children in safe, dry location. Do not jerk or strain cord at plug connections.
KEEP AWAY FROM WATER
Everyone knows that electricity and water are a dangerous combination, but did you know that an electrical appliance is still electrically alive even if the switch is off? If the plug is in, the power is on. When you are not using your appliances, keep them unplugged. ALWAYS UNPLUG SMALL APPLIANCES.
NOTICE
THIS PRODUCT IS EQUIPT WITH AN INSTANT HEAT CIRCUITY. STATE-OF-ART TECHNOLOGY
ALLOWS THE HEATER TO REACH THE OP-ERATING TEMPERATURE IN LESS THAN ONE MINUTE.
DO NOT LEAVE PRODUCT ON OR PLUGGED IN WHILE NOT IN USE. UNIT WILL BURN OUT IF
POWER IS KEPT ON FOR AN EX-TENDED PERIOD OF TIME. WARRANTY WILL BE VOIDED.
TURN UNIT OFF AND UNPLUG IT WHEN NOT IN USE
DANGER: Any appliance is electrically live even when the switch is off. To reduce the risk of death by electric shock:
- Always unplug it immediately after using.
- Do not use while bathing or in a shower.
- Do not place or store appliance where it can fall or be pulled into a tub or sink.
- Do not place in or drop into water or any other liquid.
- If an appliance falls into water or any other liquid, unplug it immediately. Do not reach into the water or any other liquid.
WARNING: To reduce the risk of burns, electrocution, fire or injury topersons:
- This appliance should never be left unattended when plugged in.
- Do not pull, twist or wrap line cord around appliance.
- Close supervision is necessary when this appliance is used by, on, or near children or individuals with certain disabilities.
- Use this appliance only for its intended use, as described in this manual. Do not use attachments not recommended by the manufacturer.
- Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to an authorized service cen-ter for examination and repair.
- Keep the cord away from heated surfaces.
- Never use while sleeping.
- Never drop or insert any object into any opening.
- Do not use outdoors or operate where aerosol (spray) products arebeing used or where oxygen is being administered.
- Do not use an extension cord with this appli-ance.
- This appliance is hot when in use. Do not let eyes or bare skin touch heated surfaces.
- Do not place the appliance on any surface while it is operating.
- Do not touch hot surfaces of the appliance use handles or knobs. Do not attempt to touch the housing of your appliance near the straightening plate as it is hot when in use.
- Never block the air openings of the appliance or place it on a soft surface, such as a bed where the air openings may be blocked. Keep opening free of lint, hair and the like.
OPERATION INSTRUCTIONS
When using this appliance near water (e.g., bathrooms), the use of an electric outlet protected by a Ground Fault Circuit Interrupter is recommended.
TURN ON/OFF
Plug this iron into a standard socket. The screen will stay “OFF”, it means
the power connected. Touch the ON/FF button for 2 seconds and beeps alert,
then the digital LCD screen is in standby state and you can use it.
Turn off in the same way by touching ON/FF button for 2 seconds the screen
will stay “OFF”. Then un-plug it
TEMPERATURE MEMORY FUNCTION
The iron with intelligent temperature memory func-tion, the default
temperature will be the tempera-ture used last time.
TEMPERATURE CONTROL
Adjust the temperature by touching the”+”/”-”button.
Max temperature 480°F/250°C, temperature rang-es from 170°F/80°C to
480°F/250°C
SET UP THE SLEEPING MODE
AUTO OFF MODE
Touch the Power button one time shortly, you can touch “+” / “-” button to set
the auto-off time, which ranges from 30 minutes to 180 minutes.
FAHRENHEIT AND CELSIUS EXCHANGE
Touch “+”and”- “button at the same time to ex-change the temperature mode
between Fahrenheit and Celsius.
LOCK AND UNLOCK
This iron has a lock button at the end, rotate clockwise is locked and
anticlockwise is unlocked.
SPECIFICATIONS:
- Plate Type: Nano Titanium
- Screen Display: Digital LCD
- Inputs: 100-240V, 50/60Hz, 65W
- Cord Lengths: 2.5meters
WARRANTY
If you found the Tank have a little water that is normal, because our product
is 100% tested with water as part of our quality control procedure.
The following warranty conditions are based on the European Directive 99/44/EC
and the Civil Code. For this product, we grant a guarantee according to the
following conditions:
- Florevita warrants that any defects due to faulty materials and workmanship in its products will be repaired at Florevita’s expense for a period of two years from the date of purchase, or that the product will be replaced in its entirety. This warranty covers the cost of materials and labour.
- Repairs will not be carried out at Florevita’s expense if it is not convincingly demonstrated (by means of a sales receipt or electronic invoice) that the day of the claim is within the warranty period.
- The warranty does not apply to product parts and products (and/or product parts) that are subject to wear and tear or that can be considered as consumables due to their nature, as well as to glass parts.
- The warranty is void if the defect is caused by damage resulting from improper use, lack of maintenance (such as scaling of parts) or if the product has been altered or repairs have been carried out by persons not authorised by Florevita.
- To use the appliance correctly, the instructions in the user manual must be followed.
TECHNICAL PARAMETERS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>