DH FitLife Multi Functional Power Tower Installation Guide
- October 31, 2023
- DH FitLife
Table of Contents
DH FitLife Multi Functional Power Tower
Product Information
The Multifunctional Dip Station is a versatile piece of fitness equipment that allows users to perform various exercises to strengthen and tone their upper body muscles. It features a sturdy construction with pedestals, main brackets, arc metal plates, adjustable poles, and a horizontal bar. The dip station also includes backrest pads, elbow pads, and parallel bar handles for added comfort and stability during workouts.
Safety Instructions
Before using the Multifunctional Dip Station, please read and follow these
safety instructions:
- Misuse of the machine and inattention while exercising can lead to malfunctions, damage, or life-threatening injuries.
- Always perform exercises with proper form and technique to avoid accidents.
- Do not exceed the weight capacity of the dip station.
- Ensure that all parts are securely assembled and tightened before each use.
- If you experience any pain or discomfort during exercise, stop immediately and consult a healthcare professional.
Product Usage Instructions
Follow these step-by-step instructions to properly assemble and use the Multifunctional Dip Station:
- Step 1: Using screws (e&g), connect the pedestals (4) and the main brackets (1) with the arc metal plates (b).
- Step 2: Use the pedestal connecting pole (6) and the arc metal plates (b) to connect the left and right pedestals (4), then stabilize them with 4 Pc 10*75 screws (g).
- Step 3: Use the main connecting pole (7) and the connecting metal plates (a) to connect the two main brackets, then stabilize them with 4 Pc 10*45 screws (f).
- Step 4: Assemble the backrest pad (8) on the backrest pole (3), then stabilize them with 4 Pc 616 inner hexangular screws (I). Assemble the backrest pole (3) on the main brackets (1) and stabilize them with 2 Pc 816 screws (j).
- Step 5: Assemble the elbow pads (9) on the two main brackets (1), stabilize them with 8 Pc 6*16 inner hexangular screws (i).
- Step 6: Assemble the parallel bar handles (10) on the two main brackets (1), stabilize them with 4 Pc 8*35 inner hexangular screws (k).
- Step 7: Assemble the horizontal bar (5) on the adjustable poles (2), stabilize them with 8*80 screws (h). Insert the adjustable poles (2) into the main brackets (1), adjust to suitable height using club screws (c) and club nubs (d), and stabilize them.
Note: It is important to not fully tighten the screws initially to allow for adjustments and proper alignment. Once all parts are correctly assembled, tighten all screws securely.
For further assistance or inquiries, please contact Your DH FitLife team.
SAFETY INSTRUCTIONS
WARNING: Please read the instructions carefully before use! Misuse of the machine and inattention while exercising can lead to malfunctions, damage or life-threatening injuries.
- This product supports muscle strength. However, it cannot replace any medical or rehabilitation device.
- This equipment is designed for adult use only. Minors, the elderly and patients with serious illnesses are prohibited from using this product. Please keep children and pets away from the product.
- DO NOT exceed the maximum load of 150kg.
- ONLY use the equipment on a solid, flat surface with floor protection.
- ALWAYS wear protective equipment during use.
- WARNING: Incorrect exercising can cause life-threatening injuries. The risk of injury can be reduced through conscious and safe execution of the technique. DO NOT exercise without proper instruction or supervision and consult your doctor if necessary.
- ALWAYS check for any damaged parts before use. DO NOT use defective goods. Please consult your doctor about possible risks and side effects.
Dear DH FitLife customer,
thank you for your purchase! We hope that you are satisfied with our product.
Customer satisfaction is very important to us and we would appreciate your
impression and feedback. Please leave us a review for this product to help
other customers with their choice. We always remain at your disposal for
further questions and requests. Feel free to contact us at any time by email:
service@DH-FitLife.com You are also welcome
to follow our social media accounts for the latest product information and
offers.
Instagram: @dhfitlife
Thank you very much!
Sporty greetings
Your DH FitLife team
Picture A shows the correct standard pull-up motion. Picture B shows the incorrect pull-up motion, which causes the machine to lean heavily and tip over. Please DO NOT perform this motion.
PARTS LIST
ASSEMBLY INSTRUCTION
- Step 1 Use screws (e&g) to connect the pedestals (4) and the main brackets (1) with the arc metal plates (b).
- Step 2 Use the pedestal connecting pole (6) and the arc metal plates (b) to connect the left and right pedestals (4), then stabilize them with 4 Pc 10*75 screws (g).
- Step 3 Use the main connecting pole (7) and the connecting metal plates (a) to connect the two main brackets, then stabilize them with 4 Pc 10*45 screws (f).
- Step 4
1. Assemble the Backrest pad (8) on the Backrest pole (3), then stabilize them with 4 Pc 6*16 inner hexangular screws (i).
2. Assemble the Backrest pole (3) on the main brackets(1), and stabilize them with 2 Pc 8*16 screws (j).- Step 5 Assemble the elbow pads(9) on the two main brackets (1), stabilize them with 8Pc 6*16 inner hexangular screws (i).
- Step 6 Assemble the parallel bar handles (10) on the two main brackets (1), stabilize them with 4Pc 8*35 inner hexangular screws (k).
- Step 7
1. Assemble the horizontal bar (5) on the adjustive poles (2), stabilize them with 8*80 screws (h).
2. Insert the adjustive poles (2) into the main brackets(1), adjust to suitable height using club screws (c) and club nubs (d) and stabilize them.References
- DH FitLife
- FitLife Fitness, Aquatics and Physical Therapy - Fitness center, gym memberships, personal training, pool and whirlpool and physical therapy clinic in Mt. Airy and Chestnut Hill, PA - Home
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>