MIYOTA 2453 Watch Instruction Manual

MIYOTA 2453 Watch

Product Information

The Cal. 2453 is a watch with multiple features, including a hour hand, minute hand, second hand, date display, and day of the week display. The positions of the date and day of the week may vary depending on the model.

Product Usage Instructions

Setting the Time

1. Pull the crown out to the 2nd position.
2. Turn the crown to set the hour and minute hands.
3. Push the crown back to the normal position to start the second hand.

Setting the Date

1. Pull the crown out to the 1st position.
2. Turn the crown counter-clockwise to set the date.
3. If setting the date between approximately 9:00 PM and 1:00 AM, the date may not change on the following day.
4. Push the crown back to the normal position after setting the date.

Setting the Day of the Week

1. Pull the crown out to the 1st position.
2. Turn the crown clockwise to set the day of the week.
3. If setting the date between approximately 9:00 PM and 1:00 AM, the day of the week may not change on the following day.
4. Push the crown back to the normal position after setting the day of the week.

Note: The specifications of the watch are subject to change without prior notice.

DISPLAY

*Date & Day of the week position may be located at different position depends on models.

SETTING THE TIME

1. Pull the crown out to the 2nd position.
2. Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the normal position, second hand begins to run.

SETTING THE DATE

1. Pull the crown out to the 1st position.
2. Turn the crown counter-clockwise to set the date.

• If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on the following day. 3. After the date has been set, push the crown back to the normal position.

SETTING THE DATE OF THE WEEK

1. Pull the crown out to the 1st position.
2. Turn the crown clockwise to set the day of the week.

• If the date is set between the hours of around 9:00 PM and 1:00 AM, the day of the week may not change the following day. 3. After the day of the week has been set, push the crown back to the normal position.

These specifications might be changed without prior notice.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>