Shenzhen Xinglin Technology U-A10 Universal Wireless Microphone Instruction Manual

Shenzhen Xinglin Technology U-A10 Universal Wireless Microphone

Product Information

• Channel Number: 614.1 – 662.5MHz
• Antenna Gain: 0dBi
• Antenna Type: Spring antenna

FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Caution:
Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

RF Exposure Information
The device was evaluated to meet general RF exposure requirements. This equipment should be installed and used with a minimum distance of 0mm between the radiator and your body. Statement for Microphone
The microphone operates in 600MHz guard bands and 600MHz duplex gap. Users should register with and check a white-space database to determine available channels prior to operation at a given location.

Product Usage Instructions

1. Ensure that the device is within the specified frequency range of 614.1 – 662.5MHz.
2. Attach the spring antenna securely to the device.
3. Make sure that the device is compliant with the FCC Rules and does not cause harmful interference.
4. Do not make any changes or modifications to the device without explicit approval from the manufacturer.
5. Maintain a minimum distance of 0mm between the device’s radiator and your body to meet RF exposure requirements.
6. If using the microphone, register with and check a white-space database to determine available channels before operating it at a specific location.

Thank you very much for your purchase of the digital products of the company. In order to make you give full play to the machine to provide all of the features, please read the instructions carefully and complete set right. Please keep this manual for future reference when necessary.

PARTS NAME

HANDHELD MICROPHONE

1. MIC set: singing to a here, speech.
2. State display: display the current working condition and frequency.
3. Power switch: knob down to open and off.
4. Battery cover: open the bottom cover, and put in AA batteries (18650 batteries).
5. Set frequency points: Press this button to set the frequency.
6. Function keys: Adjust the frequency, Tune the sound, and Lock the ID code.

RECEIVER

1. Audio signal output: inserted the amplifier or effector of the 6.35mm microphone input when use.
2. Power switch: pull up to open, pull down to off.
3. Charging indicator: charging shows red, full of blue.
4. Charge port: use 5V mike USB cable to charge
5. Receive antenna: Receive the transmitted signal.

SPECIFICATIONS

14 channels

Modulation mode:| FM
Antenna gain| 0 dBi
Microphone sensitivity:| -72dB
5/N ratio:| over 70dB
Antenna Type| ****

Spring antenna

Effective distance:| 20m

ATTENTIONS

1. Do not throw the product into the water or fire.
2. Do not use in anti-interference site of hospital, near airport, etc.
3. please do not disassemble the product, otherwise, you will lose the right to

PRODUCT WARRANTY

Subscriber data

• Address name
• Contact number
• Customer address
• Product mode
• Product mode
• Date of buying the machine
• Sales office
• Contact number
• Sales office address
• Sales office address
• Postcode
• Seal:

Product Certification

The product meet the technical requirements, qualification examination is passed.

• Product Model
• Product Name
• Factoryseria

Product function description

• Default factory channel:
  • A Microphone: 614.1MHz/B
  • Microphone: 662.5MHz
• Display interface

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution:
Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

RF Exposure Information
The device was evaluated to meet general RF exposure requirements. This equipment should be installed and used with a minimum distance of 0 mm between the radiator and your body.

Statement for Microphone operate in 600MHz guard bands and 600MHz duplex gap:
The users should register with and check a white-space database to determine available channels prior to operation at a given location.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>