ENERGYONE S4 Plus Electric Bike User Manual
- June 12, 2024
- ENERGYONE
Table of Contents
ENERGYONE S4 Plus Electric Bike
Product Information
The EnergyOne.ca manual provides instructions for the operation of the S4 Plus, S3 Plus, and Tofino models. The manual includes information on button definition, power control, headlight and taillight control, assist level change, and display information switching. It also covers the pedal-assist and full electric driving modes.
Button Definition
- = POWER: Power button
- = SWITCH/CONFIRM: Switch/confirm button
- = LIGHT: Light button
- = UP: Up button
- = DOWN: Down button
Turn On/Off the Power
The display will turn off automatically after being inactive for a consecutive
5 minutes (configurable).
Turn On/Off Headlight and Taillight
To turn on/off the head and taillights, press the light icon button.
Change Assist Level
Press the up or down buttons to change the assist level.
Switch Display Information
Press the switch/confirm button quickly to switch between different display
information:
- TRIP: Single trip distance in kilometers (km)
- ODO: Accumulated distance in kilometers (km)
- MAX: Top speed in kilometers per hour (km/h)
- AVG: Average speed in kilometers per hour (km/h)
- TIME: Driving time in minutes (Min.)
Product Usage Instructions
Pedal-Assist Driving Mode
The E-Bike features an electric pedal-assist driving system (PAS). The pedal-
assisted driving system includes a driving unit, battery, controller, and
other components. Follow the user manual for detailed instructions on using
the pedal-assist mode.
Full Electric Mode
The Model-S4 Plus, S3 Plus, and Tofino models are equipped with a thumb
throttle. Pressing down on the throttle will increase the speed of the motor
system, propelling the bicycle faster. Do not use pedal assist and the thumb
throttle simultaneously.
For more information, please visit www.energyone.ca.
OPERATION INSTRUCTIONS
BUTTON DEFINITION
KD718 display uses independent press button, in total five buttons:
TURN ON/OFF THE POWER
- Press and Hold to power on/off.
- When the motor stops working and the E-bike is not operated for a consecutive 5 minutes(this can be configured), the display will turn off automatically.
TURN ON/OFF THE HEADLIGHT AND TAILLIGHT
- Press and Hold to turn on/off the head & tail light, and the light icon will be displayed.
CHANGE ASSIST LEVEL
- Press quickly will increase the assist level.
- Press quickly will decrease the assist level.
- Level 0 is the default level, the assist level ranges from 0 to 5.
SWITCH DISPLAY INFORMATION
- Press quickly to switch
- TRIP (Single trip distance, km)
- ODO (Accumulated distance, km)
- MAX (Top speed, km/h)
- AVG (Average speed, km/h)
- TIME (Driving Time, Min.)
PEDAL ASSIST & THROTTLES
PEDAL-ASSISTED DRIVING MODE
This E-Bike has an electric pedal-assisted driving system (PAS). The pedal-
assisted driving system consists of a driving unit, a battery, a controller,
and various electronic components (harness wires, sensors, and switches). It
is essential to know that when the pedal assist system is on, the driving unit
provides power only while you are pedaling. The amount of power supplied by
the unit depends on your pedaling force and the assistance model/level you set
with the handlebar control unit at any time. When you stop pedaling, the pedal
assist system will disengage. In all models/levels, the pedal-assisted driving
system reduces progressively. It cuts off as the bike reaches your setting
assist level, or sooner if you stop pedaling. The pedal-assisted driving
system re-engages when speed drops below your setting assist level as long the
pedals are turning.
FULL ELECTRIC MODE
The Model-S4 plus / S3 plus / TOFINO are equipped with a thumb throttle. The
more you press down on the throttle, the faster the motor system will propel
the bicycle.
DO NOT USE PEDAL ASSIST AND THE THUMB THROTTLE AT THE SAME TIME.
THANK YOU FOR CHOOSING
HAVE FUN AND RIDE SAFE!
www.energyone.ca.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>