belling BDTL210X Swivel and Flex Mixers Instruction Manual
- June 12, 2024
- belling
Table of Contents
Lowline, Squareline
& Gooseneck
Swivel & Flex Mixers
INSTRUCTION MANUAL
PLEASE READ THE INSTRUCTION MANUAL CAREFULLY BEFORE USING THE
UNIT
CONGRATULATIONS
Dear Customer,
Congratulations on the purchase of your new product from Belling.
We recommend you please take some time to read the instruction manual
thoroughly to familiarise yourself with the functionality and operations to
ensure optimum performance of your new product.
After reading the manual, please store it in a safe and accessible location
for future reference.
Installation
The installation of your new tap must be carried out by a licenced plumber in
accordance to local regulations. Please ensure all packaging materials are
disposed of correctly.
Customer Care
Our Customer Care centre is available should you wish to learn more about your
appliance in relation to how to use it to its best potential, or tips on
cleaning as well as available accessories.
For further details please contact our Customer Care Team
Australia
Ph: 1300 556 816
customer.care.ha@glendimplex.com.au
New Zealand
Ph: 09 274 8265
nztechserv@glendimplex.co.nz
Thank you.
Regards,
Belling Australia and New Zealand
PRODUCT / INSTALLER DETAILS
For future reference we suggest that you staple a copy of your purchase
receipt here and complete the below so the information is always at hand.
PRODUCT DETAILS
Model number: ………………………………….
Description: ………………………………………
PURCHASE DETAILS
Date of purchase: …………………………..
Place of purchase: ……………………………..
Store name: …………………………………
Address: ……………………………….
Telephone: …………………………….
Invoice / receipt number: ………………………………
INSTALLATION DETAILS
Plumbing Details
Telephone number: ……………………………
Date of installation: ………………………….
Company / installers name: …………………….
Licence number: …………………………….
INSTALLATION
WARNING ICONS
| Icon | Type | Meaning |
|---|---|---|
| Caution | Injury or property damage risk | |
| Important / Note | Operating the system correctly |
BEFORE INSTALLATION
Turn off the water.
Check that the components of the mixer are fitted securely.
Do not try to dismantle the components yourself.
UNPACKING INSTRUCTIONS FOR INSTALLER
Please check the product and make sure that there is no damage.
Please read all installation information in this manual to ensure
understanding.
WARNING FOR INSTALLER
Contact your retailer if you have any questions.
Installation MUST be carried out by a competent person. If in doubt, please
contact a qualified plumber.
Failure to install the product correctly could invalidate any warranty or
liability claims.
All our products are tested and approved to WaterMark standards: kitchen and
basin mixers to AS/NZS 3718. Recommended temperature table information as
follows:
| Temperature | Pressure |
|---|---|
| Maximum 70’C | Maximum 500kPa |
| Minimum 1°C | Minimum 150kPa |
INSTALLATION SEQUENCE
Install the components in place in the sequence shown in the drawings (1 – 4).
-
Make sure the hole for the mixer has a diameter of 35mm.
The tap can be mounted into either a solid benchtop or directly onto a sink.
-
Prepare the tap for installation by first fitting the dress ring (A), then the rubber o-ring (B) followed by the threaded column (C). Next connect the hot and cold flexible hoses (D) to the inlets at the bottom of the tap by twisting them clockwise until secure.
-
Insert the tap into the 35mm hole on the sink or bench top. Underneath the sink, slide on the rubber washer (E) followed by the stainless steel washer (F) on to the threaded column. Next, secure the tap by screwing the fixing nut (G) onto the threaded column, ensuring the mixer is firmly attached.
PLEASE NOTE: It is recommended that taps be mounted directly through a solid benchtop where possible. If being installed into a sink then it is recommended that extra structural support be added underneath such as a tap brace (not included).
-
Connect the hot and cold supply hoses to the isolating stop valves beneath the sink and tighten until secure. Next, turn the water back on at the isolating stop valves and slowly open the tap handle until all air within the line has been released and there is a constant stream of water.
**** Make sure that the hoses are connected to the correct water supply (blue hose to cold water, red hose to hot water).
For new builds, the water supply lines should be flushed before connecting the hot and cold supply hoses to prevent foreign material from entering the connections or the body of the tap and causing damage.
Isolation stop taps are required to be fitted so water can be shut off at the sink in the event of a leak occurring.
When the mixer is fitted, check that all connections are secure and that there are no leaks present.
PRODUCT CARE & MAINTENANCE
ALL PRODUCTS
Products should be cleaned with mild liquid detergent or soap and water.
Never use harsh detergents, solvents or acidic cleaners, citrus based
cleaners, lime scale removers, household vinegar, and cleaning agents
containing acetic acid on any products as these will scratch and damage the
surface. Additionally, use of wax based furniture cream should be avoid led
using silicone.
MAINTENANCE
Regularly clean or replace dirty or blocked outlet aerator inserts in tapware
to ensure maximum functionality and longevity.
PVD & NANO COATING (PVD COLOURED PRODUCT ONLY)
All PVD coated tapware has a NANO coating applied as the final step in the
manufacturing process.
This coating has a hardening effect and provides the benefit of being
resistance to mould and bacteria whilst protecting the tap from fading and
scratching.
Whilst the NANO coating is a very hard and durable, care should still taken
when cleaning the product as outlined in the product care and maintenance
section of this manual.
MANUFACTURER GUARANTEE
This warranty is provided in Australia by Glen Dimplex Australia Pty Limited ABN 69 118 275 460 (Phone number 1300 556 816) and in New Zealand by Glen Dimplex New Zealand Limited NZBN 9429000069823 (Phone number 09 274 8265) in respect of the Belling product.
-
Belling Express Warranty
1.1 Glen Dimplex Australia provides the following warranty for all Belling Sink & Tapware Products purchased in Australia and New Zealand from an authorised reseller for use in domestic or commercial installations.
1.2 This Express Warranty covers Belling Sinks & Taps and applies to defects which have arisen solely from faulty materials or workmanship in the products. For the avoidance of doubt, defects which arise as a result of the following are not covered by this warranty:
a) Abuse, misuse, neglect, maltreatment, excessive stress or strain;
b) Excessive water pressure or temperature (which do not comply with the recommended usage below);
c) Repairs or alterations (other than by an accredited and licenced technician); and
d) Attachments of accessories any kind (other than those approved by Glen Dimplex Australia).
1.3 For the purpose of this Express Warranty, a Belling Product is a product which:
a) Was manufactured by or on behalf of Glen Dimplex Australia;
b) Bears a trademark owned by Glen Dimplex Australia;
c) Was sold by an authorised reseller or distributor of Glen Dimplex Australia; and
d) Was purchased in Australia or New Zealand for use in Australia or New Zealand.
1.4 This Express Warranty commences on the earlier of:
a) The date of purchase or, for new buildings, the date of handover; or
b) The date of installation, provided the date of installation is no greater than twelve (12) months from the date of purchase, and will continue for the relevant periods set out in the warranty period tables below.
1.5 It is the installer/consumer’s responsibility to ensure:
a) The product is not damaged prior to installation;
b) The product has all of its components; and
c) Required maintenance is performed on the product.
1.6 The Express Warranties provided in this Warranty Card are personal to the Consumer who acquires the product from the relevant retailer for their own consumption or use and not for resale or resupply. Accordingly, claims made pursuant to this express warranty cannot be made by anyone other than the Consumer.
1.7 If the Express Warranty:
a) Is covered by a parts and labour warranty, the warranty covers both the repair of the defective part or the provision of a spare part to replace the defective part but does not cover the installation of that part to the extent that the installation requires the removal, alteration, repair or change to a connecting surface or any indirect or consequential building works; or
b) Is covered by a parts only warranty, the warranty covers only the repair of the defective part or the provision of a spare part to replace the defective part and does not include the removal of the defective part or the installation of the repaired or replaced part.
1.8 In this Express Warranty, special order, custom or discontinued items may be replaced by a reasonable alternative product and/or finish should a valid warranty claim occur. -
Warranty periods
Residential / Commercial: Glen Dimplex Australia warrants that the below products which are purchased by consumers for use in either the residential home or in commercial applications (e.g. hotels, aged care facilities, hospitals, schools, factories, motels) will be free from all defects in materials and workmanship for the periods specified below. Conditions apply to special order, custom or discontinued items, refer to section 1.8.
Unless specified, labour is not included. Category| Includes| Details
---|---|---
Tapware (Stainless Steel)| All models sold under the Belling brand| 1 Year: Parts only. Hot & cold supply hoses / pull-out hoses / mixer hand pieces
5 Years: Parts & labour
10 Years: Parts only (standard cartridge)
Tapware (PVD Finishes)| All models sold under the Belling brand| 1 Year: Parts only. Hot & cold supply hoses / pull-out hoses / mixer hand pieces
5 Years: Parts & labour
10 Years: Parts only (standard cartridge)
Sinks (Stainless Steel)| All models sold under the Belling brand| 1 Year: Parts & labour
10 Years: Replacement only
Sinks (PVD Finishes)| All models sold under the Belling brand| 1 Year: Parts and labour
5 Years: Replacement only
Sink Accessories| Drainer tray / roller mat / strainer bowl / chopping board| 1 Year: Parts only
Wastes & Overflows| Plug / waste / seals / plastic tubing| 1 Year: Parts only
-
Excludes damage to ceramic disc cartridges from pieces of copper tube, plastic tube, sand, dirt, or thread tape etc.
-
Consumer guarantees
Our goods come with guarantees that cannot be excluded under the
Australian / New Zealand Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. -
How to make a claim
4.1 You may make a claim under this warranty through our website, contacting our customer care line or via email. Contact details for Glen Dimplex Australia and New Zealand can be found at the end of this document.
4.2 To make a valid claim under this warranty, you must:
a) Lodge the claim with us as soon as possible and no later than 14 days after you first become aware of the breakdown;
b) Provide us with the product serial number;
c) Provide us with reasonable proof of purchase for the product. This can take the form of a store receipt, new home handover form or other payment receipt documentation; and
d) If required by us, provide us (or any person nominated by us) with access to the premises at which the product is located at times nominated by us (so that we can inspect the product). -
Warranty claims
5.1 If you make a valid claim under this warranty and none of the exclusions set out in section 2 apply, we will, at our election, either repair the product or replace the product with a product of identical specification (or where the product is superseded or no longer in stock, with a product of as close a specification as possible).
5.2 Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods. Products are designed and supplied for normal domestic use. We will not be liable to you under this warranty for business loss or damage of any kind whatsoever.
-
Contact our Customer Care Team
Glen Dimplex Australia Pty Ltd
Ph: 1300 556 816
customer.care.ha@glendimplex.com.au
www.glendimplex.com.au
Glen Dimplex New Zealand Ltd
Ph: 09 274 8265
nztechserv@glendimplex.co.nz
www.glendimplex.co.nz
READ THE INSTRUCTION BOOKLET BEFORE INSTALLING AND USING THE APPLIANCE.
The manufacturer will not be responsible for any damage to property or to
persons caused by incorrect installation or improper use of the appliance. The
manufacturer is not responsible for any inaccuracies, due to printing or
transcription errors, contained in this manual. In addition, the appearance of
the figures reported is also purely indicative.
The manufacturer reserves the right to make changes to its products when
considered necessary and useful, without affecting the essential safety and
operating characteristics. Glen Dimplex constantly seeks ways to improve the
specifications and designs of their products. Whilst every effort is made to
produce up to date literature, this document should not be regarded as an
infallible guide. Actual product only should be used to derive cut out sizes.
All appliances must be installed by a qualified person/s with adherence to the
relevant electrical, plumbing and building codes, with compliance being issued
as required by state or national legislation.
Additionally, all upright cookers must have the anti-tilt device installed
correctly in adherence to the relevant standards by a licenced installer.
For maximum effectiveness and efficiency all rangehoods should be installed
with the use of ductwork, by a licenced installer with adherence to the
relevant state and national building codes and regulations.
All Glen Dimplex appliances are for Domestic use only, and must be installed
by a licenced installer into Domestic Applications only, without exception and
to the required Authorities guidelines.
Any installation outside of this will VOID warranty. Alfresco areas are not a
Domestic application.
Distributed by
Glen Dimplex Australia Pty Ltd
Ph: 1300 556 816
customer.care.ha@glendimplex.com.au
Glen Dimplex New Zealand Ltd
Ph: 09 274 8265
nztechserv@glendimplex.co.nz
For service advice, please contact the Customer Care Centre by phone or email
above.
For full terms and conditions, or to register your product warranty, please
visit our website:
www.glendimplex.com.au
www.glendimplex.co.nz
belling.com.au
belling.co.nz
VERSION 1 REVISION 20220802
References
- Homepage | Belling
- Homepage | Belling
- Glen Dimplex Australasia: Manufacturer of Heating, Cooling and Cooking Appliances
- Glen Dimplex Australasia: Manufacturer of Heating, Cooling and Cooking Appliances
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>