Yale YDM7220 Digital Door Lock User Guide

Yale YDM7220 Digital Door Lock

External Body

(External Body, installation on the outside of the door)

Basic Contents

• User Manual
• Installation Guide
• RFID Key Tags X 4
• Mechanical Keys X 2
• Screws

Optional Accessories

• Remote Controller
• Remote Control Module
• Bluetooth Module
• AA Batteries X 4

Specifications

-15~55°C(5~131 °F)

Internal Body| 72(W) X 344(H) X 36(0) mm
Works for| 4x 1.5VAA Alkaline batteries(Operatingvoltage:4.5~6V)
Optional product| Remotecontroller,Moduleand etc.

• Battery life may vary depending on temperature, moisture levels, frequency of use and the quality of battery used. Estimated battery life expectancy of 1 year  (lock is used 10 times per day).
• Optional products may not be available depending on your country or local dealer.

Internal Body

(Internal Body, installation on the inside of the door)

External Body

Internal Body

Setting Menu

• Normal Mode: Anyone who knows ‘User PIN Code’ has authority to set features.
• Advanced Mode: Only the person who knows ‘Advanced PIN Code’ has authority to set features.
• Visitor Code: Users with Visitor Code can only open the door with no access to change settings.
• Onetime Code : The onetime code is used only once for unlocking the door lock and automatically deleted after usage.
• User Slot Number: It should be 2 digits(like ’01 ‘, ’02’ . .’99’, ’00’) and available in advanced mode.

Product Features

• One Touch Fingerprint Access
  Fingerprint detection for personalised access. Unique Sensor not only provides high security but faster unlocking experience as well.

• Smart Touchpad -Auto Lock
  The door Locks when you touch the palm on the keypad.

• 3 minute Lock Out Feature
  After five(S) unsuccessful attempts at entering an invalid code or RFI D Key Tags, 3minute Lock out mode will be activated.

• Smart Etiquette
  When entering a pin code on the keypad, the user can open the door lock in silent mode.

• Fake PIN Code
  Users can hide their pin code by either entering a series of digits at the beginning or after their pin code. thus, the pin code is not exposed.

• Internal Forced Lock
  It is a security-enhancing function that ‘disables’ authentication methods such as passwords, RFI D key tags and fingerprints from outside when setting up functions indoors.

• External Forced Lock
  It is a security-enhancing function that an alarm goes off if someone opens door from inside when setting up functions outside.

• Voice Guidance
  It guides you through the operation status on how to enable various features & settings- mode for easier and more convenient use.

• Safe Handle
  This feature can help prevent small children exiting the home without permission ..

Otherfeatures and Benefits
Remote Controller (Optional):

• This option may not be available depending on your country or local dealer.
•  Network Module/Controller (Optional):
• It allows door lock to connect with Home network controller.
• Intrusion/Broken Alarm.
• Low Battery Alarm and Emergency Power Supply.
• Yale Network Module.

Yale Access App
Yale Access gives you the peace of mind of knowing who and what you love is safe – no matter where you are- just at the touch of your smartphone.

Normal Mode

(Default Mode)
Normal mode is for convenient mode for anyone with user code to change various settings.

Remote Control Registration
Set with registration button located on the top of remote controller. You can press it using a pin like the one shown in the image.

Please note following when pairing lock with Yale Access App.

1. Because Yale Access App is only available in advanced mode.
2. Please be informed that all registered credentials will be deleted when changing mode or registering and deleting app.
3. Depending on product type or Firmware version, app registration and door lock connection in normal mode may not be possible, so if registration is not possible, change from normal mode to advanced mode and try again.

Automatic/Manual Lock

Enable Automatic Lock

• Release the button to set automatic lock mode on the internal Body M (after opening the battery cover).

Enable Manual Lock

•  Press the button to set manual lock mode on the internal Body.

Unlocking Door with Fake Code

External Forced Lock

Enable External Forced Lock : Fingerprint

• Scan with registered Fingerprint and hold the fingerprint area 11!!,J until you hear 3 beep sounds.

Enable External Forced Lock: User Code

Enable External Forced Lock: RFI D Key Tag

Contact RFI D key tag on [RFI D key tag reader] for 5 sec. until you hear 3 beeps.

Disable External Forced Lock
To disable the External Forced lock enter the pin code, present a registered card or unlock the door using fingerprint.
If the internal Lever is turned to open the door from inside, the alarm will sound.

Volume

The operation sound volume will be adjusted according to the Volume Switch setting.

Minute Lock Out

All access mode from the external side are disabled for 3 minutes to deter unauthorized access.
Disable 3-minute Lock Out

• Open with inside door bar.
• Open the door with mechanical key.
• Press I button.

Alarm

Intrusion Alarm : The alarm goes off when someone forces the door open. For example, In case of an intrusion by opening a gap in the door while the door is locked.
Broken Alarm(Breakage Alarm) : The alarm goes off when the front part is Broken Alarm(Breakage Alarm) : The alarm goes off when the front part is

Turn off alarm

• Enter the registered User code.
• Press  I button for 5 seconds.
• Enter the registered Fingerprint.
• Touch the registered RFID Key Tag.

Emergency power supply for discharged batteries

Power supply

It may sustain 1 year if used 10 times a day. (Users are advised to use I authentic Alkaline batteries.)* Kindly dispose of used batteries.

You must replace all 4 batteries in the following cases:

• The Low Battery LED on the keypad flickers red.
• When a low battery notification message is played.

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE NATIONAL CODE OR RECYCLING PROGRAM.

Warning
USE ONLY ALKALINE BATTERIES
DO NOT USE LITHIUM OR RECHARGEABLE BATTERIES BECAUSE THEY MAY CAUSE THE LOCK TO MALFUNCTION

Code Chart

Duplicate if necessary

PIN Code Management(Up to 100 Users.)

User Type| User Name| PIN Code
Advanced|  |
User|  |
User|  |
User|  |
User|  |
User|  |
User|  |
User|  |
User|  |
User|  |
User|  |
User|  |
User|  |
User|  |
User|  |
User|  |
User|  |
User|  |
User|  |
User|  |
User|  |
User|  |
User|  |

Please be informed that all registered credentials will be deleted when changing mode or registering and deleting app.

Advanced Mode
Advanced mode is a mode in which only the administrator can set the door lock and provide access to other users.100 users passwords, 100 users RFID key tags, 100 users fingerprint and individual registration and deletion of one- time passwords enable efficient management of visitors.

User Slot Number should be 2 digits. like ’01’ … ’99’ and ’00’: Location of 100th user slot must be assigned “00” instead of “100”.
1 Avoid to set up sequenced numbers e.g. 1,2,3,4)
3 If you have previously setup PIN codes, Fingerprints or Key tags to the lock, the registration of Yale Access Module will erase them all but the Master Pin Code. They must be registered again via Yale Access app.

Important notes

Safety and Warning

• For use on residential entry doors. Not to be used where the internal escutcheon will be exposed to outdoor elements (e.g. on a gate).
• Do not attempt to disassemble the digital door lock by yourself.
• By doing so, you may get an electric shock and damage the product.
• Do not use force with a tool onto the product.
• Make sure to lock the door tight when you go out.
• Be careful not to hit the handle as it may cause injuries.
• Do not use water and any type of solvent to clean the product such as gasoline or benzene as they can cause damage to electronic circuit, deterioration and or paint peel-off.
• It is recommended to change User Code on a regular basis.
• In manual lock mode, make sure to double check whether the door is securely locked.
• When External Forced lock is set and unlock the door, the alarm will be activated.
• Do not use lithium or rechargeable bameries.
• Only alkaline batteries are recommended.
• Make sure to follow the above instructions to avoid any injuries.
• It cannot be guaranteed in special conditions & environment such as water condensation, seaside.
• Warranty will not cover- exposure to dampness, excessive heat, excessive humidity and other extreme environmental conditions, corrosion, damage beyond repair, rusting, unauthorised modifications, unauthorised repairs, neglect, accident, alteration, natual disaster, spillage of liquid or food particles.

PLEASE READ INSTRUCTIONS BEFORE USE.
The functions and design of this product can be changed without prior notice for performance and quality improvement.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>