AV LINK HS-1614W HDMI Distribution Amplifier User Manual
- June 12, 2024
- Av:link
Table of Contents
AV LINK HS-1614W HDMI Distribution Amplifier
Introduction
The HS-1614W distribution amplifier is available in sizes up to 4 outputs and is ideal for applications that require a reliable distribution of a single HDMI source signal to various displays.
The HDMI 2.1 boards are HDCP 2.3 compliant and support 8K/60Hz. The HS-1614W distribution amplifier contributes to displaying the same 8K/60Hz video source to different televisions and screens at the same time in a hypermarket or an electrical appliance store.
Package Contents
- 1x AV LINK HS-1614W HDMI Distribution Amplifier
- 1x User Manual1x Power Adapter DC 12V
- 5x Screws
- 4x Foot Pads
If there is anything missing, please contact your vendor.
Features
- Distribute one Ultra HD/8K source to 4 HDMI displays
- HDMI 2.1/HDCP 2.3 compliant and 40Gbp bandwidth
- Support up to 8K/60Hz 4:2:0 10bit, 8K/30Hz 4:4:4 10bit, and 4K/120Hz 4:4:4 10bit
- Support FRL, HDR, HDR10, HDR10+, and Dolby vision
- Audio Extract Function with Stereo 3.5mm Aux
- EDID management
- CEC control
- LED indicator shows operating status
- Firmware upgrade via Micro-USB port
- Cascading for the more distribution
Specifications
| Function | HS-1614W |
|---|---|
| HDMI Input Connector (A-Type Female) | 1 |
| HDMI Output Connector (A-Type Female) | 4 |
| Max. Resolution | 8K/60Hz YUV420;10 bit |
| Cable Distance (Device to Monitor) | 5m |
| Signal Type | Standard HDMI Signal |
| Power Adapter (Min.) | DC 12V/1.25A |
| Housing | Metal |
| Weight | 650g |
| Dimensions (LxWxH) | 210X114X25mm |
LOCAL FRONT VIEW
LOCAL REAR VIEW
Connection
Installation
- Connect the HDMI extension cable between the BD and the “HDMI IN” port of HS-1614W Distribution Amplifier Device.
- Connect the HDMI extension cable between the UHDTV and the “HDMI OUT” port of HS-1614W Distribution Amplifier Device.
- Connect the power cord on the extender.
- Turn on the BD UHDTV and Power on HS-1614W.
Input/output Interface
| I/O number | Function |
|---|---|
| 1 | DC 12V Input |
| 2 | RS232 |
| 3 | HDMI Output 1 |
| 4 | HDMI Output 2 |
| 5 | HDMI Input |
| 6 | HDMI Output 3 |
| 7 | HDMI Output 4 |
| 8 | Audio Output |
| 9 | Power LED |
| 10 | Firmware Upgrade |
| 11 | EDID Management |
|---|---|
| 12 | Resolution Indicator |
| 13 | HDMI Input LED |
| 14 | HDMI Output 1 LED |
| 15 | HDMI Output 2 LED |
| 16 | HDMI Output 3 LED |
| 17 | HDMI Output 4 LED |
EDID Selection 1:ON; 0:OFF
| 1 2 3 4 | Mode |
|---|---|
| 0 0 0 0 | Copy OUT 1 |
| 0 0 0 1 | Copy OUT 2 |
| 0 0 1 0 | Copy OUT 3 |
| 0 0 1 1 | Copy OUT 4 |
| 0 1 0 0 | 1920X1080p, 60Hz |
| 0 1 0 1 | 1920X1080p, 120Hz |
| 0 1 1 0 | 3840X2160p, 30Hz |
| 0 1 1 1 | 3840X2160p, 60Hz |
| 1 0 0 0 | 3840X2160p, 120Hz |
| 1 0 0 1 | 7680X4320p, 30Hz |
| 1 0 1 0 | 7680X4320p, 60Hz 4:2:0 |
Note
For the best 8K performance, it is recommended to use 8K certified cable.
© C&C AV LINK GROUP LTD. All rights reserved.
Trademarks:
All the companies, brand names, and product names referred to this manual are
the trademarks or registered trademarks belonging to their respective
companies.