gembird 3DP Printer Gemma Installation Guide

: June 15, 2024
: GEMBIRD

Table of Contents

gembird 3DP Printer Gemma
Product Usage Instructions
FAQ
Features
Specifications
INSTALLATION INSTRUCTION
GENERAL INFORMATION
SAFETY
Documents / Resources

gembird 3DP Printer Gemma

Specifications

Model: 3DP-GEMMA
Features:
- Compact 3D printer model: Gemma
- Auto filament feeding and retracting
- Suitable for use with e.g. PLA or PLA+ filaments
- Magnetic platform with auto leveling function
- Practical 3.5” LED display

Product Usage Instructions

Unboxing and Setup

Remove the printer and accessories from the packaging. Check and confirm that you have all the parts listed in the manual.
Remove the carton support and plastic bag from the printer and place it on a table or desk. Remove any packaging materials inside the printer.

Filament Installation

Insert the Filament Guide Tube into the pneumatic connector on top of the Extruder.
Ensure the power switch on the AC Power Adapter is off. Connect the power adapter to the printer and plug it into a power outlet.

Loading Filament and Printing

Cut about an inch off the end of the filament and straighten it.
Insert the filament into the Extruder and start loading the filament using the controls on the printer.
Insert the microSD card into the slot on the printer and select the file to begin printing.

FAQ

Q: What should I do if the filament gets stuck during printing?

A: If the filament gets stuck, stop the printing process, remove the filament, clear any blockages, and reload the filament following the instructions in the manual.

Q: Can I use filaments other than PLA or PLA+ with this printer?

A: It is recommended to use PLA or PLA+ filaments with this printer for optimal performance and print quality.

Features

Compact 3D printer model: Gemma
Auto filament feeding and retracting
Suitable for use with e.g. PLA or PLA+ filaments
Magnetic platform with auto leveling function
Practical 3.5” LED display

Specifications

Principle: FFF (Fused Filament Fabrication)
Build size: up to X 100 mm x Y 120 mm x Z 100 mm
Filament: PLA, PLA+ spool, 1.75 mm
Print precision: ±0.10 mm
Positioning precision: Z axis 0.0025 mm, XY axis 0.011 mm
Nozzle diameter: 0.40 mm
Extruder temperature: up to 250 °C
Consumption power: 110-240V AC, up to 60 W, input DC 12V 5A
Slicing software: WiiBuilder, Cura
Supported inputs: MicroSD card (up to 8 GB, FAT32 4KB)
Heating bed: no
File type Input: STL, OBJ, output : code
Weight: NW 3 kg
Dimensions: 210 x 210 x 290 mm

INSTALLATION INSTRUCTION

Please check and confirm that you have all the parts listed below:

1x 2.0mm Hex Wrench
1x 8mm Wrench
1x M6 Brass Nozzle
1x MicroSD™ Card
1x MicroSD Card Reader
1x AC Power Adapter
1x AC Power Cord
1x Package Sample Filament
1x Quick Start Guide
Remove the carton support and plastic bag from the printer and place it on a table or desk.
Remove the carton block in the printer.
Insert the Filament Guide Tube into the pneumatic connector on top of the Extruder.
Ensure that the power switch on the AC Power Adapter is in the OFF position(O). Plug the DC barrel connector on the AC Power Adapter into the Power Port on the right side of the printer.
Plug the included AC Power Cord into the AC Power Adapter, then plug the other end into a nearby AC powero outlet.
Flip the power switch on the AC power adapter to the ON position (I). After the printer finishes booting, you will see the following wizard.
Depress the Knob on top of the printer to select Next on the Welcome screen, then again to select Next on the.
STEP1: LOAD FILAMENT screen.
Using a pair of scissors or side cutters, cut about an inch off the end of the filament, then gently straighten the end of the filament.
Squeeze the lever on the Extruder, Insert the filament into the bottom until you encounter resistance, then release the lever.
Press the Knob to start loading the filament. Once the filament starts extruding from the Nozzle, press the Knob again to stop extrusion, then press the Knob to select the Continue option.
Remove the included micro SD™ card from the Accessory Box, then insert it into the microSD card slot to the left of the LCD Screen. Press the Knob to select Next on the wizard.
Press the Knob to select Print FromSD. Rotate the Knob to highlight a code file on the microSD card, then press the Knob to begin printing the highlighted model.
Once the print is finished, remove the Magnetic Print Bed from the metal print platform, then bend it toremove the model. Replace the Magnetic Print Bed on the metal print platform.

WARNING

GENERAL INFORMATION

This product has been manufactured by or on behalf of Gembird Europe B.V.. Inquiries to the EU Importer or related to product compliance in Europe should be sent to:
Gembird Europe B.V., Wittevrouwen 56, 1358 CD, Almere, The Netherlands. www.gmb.nl
Warranty conditions:www.gmb.nl/warranty
Product support:www.gmb.nl/service and/or helpdesk@gembird.nl

SAFETY

To ensure safe handling of the product, follow the safety advice.

DECLARATION OF CONFORMITY

Hereby, Gembird Europe B.V., declares that this equipment complies with Directive LVD(2014/35/EU), EMC(2014/30/EU), and RoHS (2011/65/EU).
The full text of the EU Declaration of Conformity is available at the following internet address: www.gmb.nl/certificates

WASTE DISPOSAL

The symbol of the crossed-out wheeled bin means that this appliance must not be disposed of with household waste at the end of its useful life.
The appliance must be disposed of in specially set-up collection points, recycling yards, or disposal companies.
Owners of WEEE from private households can hand them in free of charge at the designated collection points of the public waste disposal authorities or the take-back points set up by manufacturers or distributors in terms of Directive 2012/19/EU.
Please delete all personal data before returning the appliance.
Before returning, please remove batteries or re-chargeable batteries that are not enclosed by the old device, as well as lamps that can be removed without destruction, and dispose of them in a separate collection.
GEMBIRD EUROPE B.V
http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners