Bietrun YX03 Karaoke Party Speaker Machine User Manual
- June 13, 2024
- BIETRUN
Table of Contents
Bietrun YX03 Karaoke Party Speaker Machine
Product Information
The product is a microphone with a frequency range of CH B: MHz 580.5581.5582.5583.5584.5585.5586.5587 .5 588.5589.5590.5591.5592.5593.5594.5.
Product Usage Instructions
To use the microphone, follow the steps below
- Ensure that the microphone is properly connected to the device you intend to use it with.
- Turn on the microphone and the device it is connected to.
- Adjust the frequency setting on the microphone to match the desired channel.
- Position the microphone at an appropriate distance from the sound source.
- Speak or sing into the microphone clearly and at an appropriate volume.
- Monitor the audio output to ensure that the microphone is capturing sound correctly.
- Adjust the microphone’s gain or volume control, if necessary, to achieve the desired audio level.
- When finished, turn off the microphone and disconnect it from the device.
Note : Refer to the full user manual for detailed instructions on connecting and configuring the microphone for specific devices and settings.
Product introduction
Bistrun Karaoke Party Speaker Machine adopts brilliant rbientlighting. 8.25-inch full-range speces, simple appesrance; excelent complete supports laptops, computers, DVDs, power ampliters, LCD TVs, mobile phones and otheraudition products The producti widely lectures, outdoor and Indoor activities, birthday parties and other scenes.
Charging Operation
- Please use the 6V/24 adapter included Type -C charging cable to charge the spesker.
- The red light is on during charging, and blue light is on when fully charged
- When there is DE prompt sound and the battery icon on the dispisy flashes, it indicates the battery is low. The battery icon stope flashing when the speaker is out of power and turned off.
- The product works normally when it is charging. product usually takes fully charge.
Notes:
- The battary life is slightly different due to the colorful ambient light effects and the volume level, which is a normal omenon.
- Due to the characteristics of the rechargeable battery, the machine is not used for a long time, pisase chare it at least once a month to the
Functional Operation
Control panel
Notes:
- Que to the characteristics of the rechargeable battery, if the machine is not used for a long time, please charge it at least once a month to protect the battery and extend the battery life.
- When choosing any one of the above audia input modes, you must short press the “MODE* button to seftch to the corresponding mode, othorwise, the product wit have no signal input and will not work orgporty.
REMOTE CONTROL INSTRUCTION
Microphone Introduction
TROUBLE SHOOTING
PRODUCT PARAMETERS
ACCESSORIES LIST
- Speaker
- Wireless Microphone x2
- Audio Cable x1
- Shoulder Strap N1
- Charging cable x1
Microphone frequency
CH B: Uh 500 € 5026 583.1 585.5. 588.5, 589.5. 590.5. 591.5, 592.5. 603.5 594. 587.8
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution : Any changes or Modi? cations to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
- The device has been evaluated to meet general RF exposure requirements.
- The device can be used in portable exposur conditions, and compliance with exposure requirements.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>