VONYX 172.573 AM Series Amplified Mixer Instruction Manual

: June 13, 2024
: VONYX

Table of Contents

UNPACKING INSTRUCTION
POWERSUPPLY
CONTROL ELEMENTS
BT STREAMING
TECHNICAL SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VONYX 172.573 AM Series Amplified Mixer Instruction Manual

VONYX 172.573 AM Series Amplified Mixer Instruction
Manual

Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to benefit fully from all features.

Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference.

– Prior to using the product, please ask advice from a specialist. When the product is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
– The product contains voltage carrying parts. Therefore do NOT open the housing.
– Do not place metal objects or pour liquids into the product. This may cause electrical shock and malfunction.
– Do not place the product near heat sources such as radiators, etc. Do not place the product on a vibrating surface. Do not cover the ventilation holes.
– The product is not suitable for continuous use.
– Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction. – When unplugging the product from a mains outlet, always pull the plug, never the lead.
– Do not plug or unplug the product with wet hands.
– If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
– If the product is damaged to such an extent that internal parts are visible, do NOT plug the product into a mains outlet and DO NOT switch the unit on. Contact your dealer. Do NOT connect the product to a rheostat or dimmer.
– To avoid fire and shock hazard, do not expose the product to rain and moisture.
– All repairs should be carried out by a qualified technician only.
– Connect the product to an earthed mains outlet (220- 240Vac/50Hz) protected by a 10-16A fuse.
– During a thunderstorm or if the product will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
– If the product has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the product in humid rooms or outdoors.
– To prevent accidents in companies, you must follow the applicable guide lines and follow the instructions.
– Do not repeatedly switch the product on and off. This shortens the life time.
– Keep the product out of the reach of children. Do not leave the product unattended.
– Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
– Do not force the controls.
– If this product is with speaker inside which can cause magnetic field. Keep the product at least 60cm away from computer or TV.
– If this product have a built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the product for a long period of time. Otherwise the battery may be permanently damaged.
– If the battery is damaged please replace with same specifications battery. And dispose the damaged battery environment friendly.
– If the product has fallen, always have it checked by a qualified technician before you switch the product on again.
– Do not use chemicals to clean the unit. They damage the varnish. Only clean the product with a dry cloth.
– Keep away from electronic equipment that may cause interference.
– Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
– Switch the product off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the product.
– Make sure that the mains lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
– The mains voltage is 220-240Vac/50Hz. Check if power outlet match. If you travel, make sure that the mains voltage of the country is suitable for this product.
– Keep the original packing material so that you can transport the product in safe conditions.

⚠ This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.
⚠ This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.

The product has been certified CE. It is prohibited to make any changes to the product. They would invalidate the CE certificate and their guarantee!
NOTE: To make sure that the product will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be returned, it is important that the product is returned in the original factory box and packaging.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

POWERSUPPLY

On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains voltage corresponds to this, all other voltages than specified, the light effect can be irreparably damaged. The product must also be directly connected to the mains and may be used. No dimmer or adjustable power supply.

⚠ Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate electrical ground to avoid the risk of electrocution or fire.

CONTROL ELEMENTS

VONYX 172.573 AM Series Amplified Mixer Instruction Manual - CONTROL
ELEMENTS VONYX
172.573 AM Series Amplified Mixer Instruction Manual - CONTROL
ELEMENTS

BALANCE MICROPHONE INPUT Balanced XLR input jacks.
LINE INPUT Balanced 6.3mm (¼”) jack line inputs. You can connect either balanced or unbalanced phone plugs to these jacks.
GAIN Adjusts the input signal level.
HI EQ Adjust the high tone each channel.
LOW EQ Adjust the low tone each channel.
EFFECT Use this control to set the effect level you want to achieve. The EFF control adjusts the input signal to give you a desired effect.
PAN The PAN control determines the position of the channel signal within the stereo image. When working with subgroups, you can use the PAN control to assign the signal to just one output, which gives you additional flexibility in recording situations.
PFL The PFL (Pre- Fader Listen) function allows the user to listen to the level before fader control. Used for headphone monitoring of each channel, regardless of the main mix
PEAK This is the lamp which indicates the input signal level of this appliance ( regardless of output) when GAIN volume is adjusted.
CHANNEL FADER Adjusts the level if the channel signal. Use these faders to adjust the balance between the various channels.
SEND / EFFECT Press the button to send effect signal to the channels.
REPEAT This is used for adjusting frequency of echo repeat. Since too much echo repeat may cause a howl , please adjust frequency properly.
MP3/AUX VOL Volume control for AUX input, MP3 via USB or SD.
STEREO GRAPHIC EQUALIZER 2X5-band equalizer is provided for tone control over each frequency, and for precise high quality sound by final tone control.
OUTPUT MAIN FADER (LEFT/RIGHT) This is a master fader for adjustment for volume of left / rig he output.
EFFECT LEVEL Using by this control, you can adjust signal level of echo repeat & external effect.
DSP Press the button to select an effect.
OUTPUTS LEVEL INDICATOR Displays the signal of output.
PHANTOM POWER SWITCH This switch toggles phantom power on and off. When the switch is on the mixer supplies +48V phantom power to all channels that have XLR input jacks. Turn this switch on when using one or more phantom-powered condenser microphones.
HEADPHONE LEVEL Volume control for signal level of headphones.
PFL With the PFL-switch, you can route an input channel to the headphone section
HEADPHONE JACK 6.3mm (¼”) input jack for connecting a headphone.
RECORD PIN JACK This jack can be connected with record audio source when recording the mixed input, CD signal.
EFX SEND RETURN This connection can be used to connect all kinds of external effects.
OUTPUT JACK (LEFT / RIGHT) Connecting audio sources with the master signal for amplifiers, active monitors, etc.
POWER SWITCH Push marked (1). When you want to operate, the power LED will be turned on when working
POWER JACK This is out of connect the power supply jack.
SPEAKER JACK LEFT, RIGHT These 6.3 jacks are used to connect speakers.
A.USB or SD slot B: USB or SD control with Start/Pause; Previous and Next and mode of exchange between USB or SD and BT. Press once to show “BT”, now the mixer can be found by mobile device for streaming. C: Display showing playing time and No. of Song playing etc ….