Marson Technology MT6228 2D Fixed Mount Scanner User Guide
- June 13, 2024
- Marson Technology
Table of Contents
MT6228
Fixed Mount Scanner
Quick Guide
Out of Box
Introduction
| 1 | Good Read LED |
|---|---|
| 2 | Tuning Mode LED |
| 3 | No Read LED |
| 4 | Power On LED |
| 5 | Tuning Button / Scan Button |
| 6 | Mechanical Knob For Lens Focus |
I/O Box
| PIN | Signal | Function |
|---|---|---|
| 1 | Opto Isolated Input(-) | Trigger Input |
| 2 | Opto Isolated Input(+) | |
| 3 | VCC (+) | 5-36 VDC |
| 4 | GND (-) | |
| 5 | Opto Isolated Ouput (-) | Good Read |
Indicator
6| Opto Isolated Output (+)
7| Opto Isolated Output (-)| No Read
Indicator
8| Opto Isolated Output (+)
Installation
Above is an installation example:
- Connect the scanner with I/O Box via aviation plug
- Connect 5~36V DC power, which is not needed when applying USB cable.
- Connect I/O Box with PC or data terminal via RS232/USB/Ethernet.
- If external trigger mode is used, an external sensor or PLC is needed.
- If OK or NG signal is needed, connect Pin 5~8 to external device.
Input Diagram
NPN Photoelectric Switch Input
PNP Photoelectric Switch Input
Relay Photoelectric Switch Input
Output Diagram
Good Read（OK）
No Read（NG）
Specifications
Performance|
---|---
Resolution| 1280 x 800
Scan Angle| Horizontal 28° (H), Vertical 33° (V)
1D Symbologies| UPC A , UPC E , EAN 8, EAN 13 , Code 128 , Code 39, Code 93,
Code 32, Code11 , Codabar, Plessey, MSI , Interleaved 2 of 5 , IATA 2 of 5 ,
Matrix 2 of 5 , Straight 2 of 5 , Pharmacode , RSS-14 , RSS-14 Expanded ,
RSS-14 Limited , Composite Code-A Composite Code-B , Composite Code-C
2D Symbologies| PDF 417 , Micro PDF 417 , Data Matrix , QR , Micro QR , Aztec
, MaxiCode
Motion Tolerance| Continuous Mode : 1M / sec External Trigger Mode : 2M / sec
Connectivity
Interface| RS232, USB (HID; CDC), Ethernet (TCP/UDP)
External Input| 1 Optoisolated Input (NPN/PNP/Relay)
External Output| 2 Optoisolated Output (Good/NG)
Power| 5-36 VDC
Physical Characteristics
Dimension| 44 (W) x 52 (D) x 29 (H) mm
Material| Aluminum Alloy
Sealing| IP65
User Environment
Storage Temp.| -40°C-+70°C
Operating Temp.| -20°C – + 50°C
Regulatory| TBA
Depth of Field
| Lens Focus | LR (Long Range) | HD (High Density) |
|---|---|---|
| Resolution | 1D : ≥5 mil ; 2D :≥9 mil | 1D: ≥3 mil ; 2D: ≥7mil |
| DOF | Code39 (5 mil) : 150 mm – 300 mm EAN -13 (13 mil) : 115 mm – 550 mm QR | |
| Code (11 mil) : 125 mm – 250 mm | Code39 (3 mil) : 85 mm – 120 mm EAN-13 (13 |
mil) : 75 mm – 245 mm QR Code (7 mil) : 80 mm – 150 mm
Field of View
| Distance (mm) | Field of View (mm) |
|---|---|
| Horizontal (mm) | Vertical (mm) |
| 100 | 53 |
| 150 | 79 |
| 200 | 106 |
Dimensions
Auto-tuning
-
Press and hold the Tune Button for about 5 seconds.
-
Aim at the desired barcode. Release the Tune Button to start Auto-tuning.
-
LED status indicates Auto-tuning result (Error or Good). If the result is Good, the settings will be stored permanently. No need for re-tuning after a power cycle. If the result is Error, please start over from step 1.
Troubleshooting
If the scanner does not work properly, please do the following first:
- Check if the cable is connected firmly and is supplied by original manufacturer.
- Check if the symbology (barcode type) is enabled.
- Check if the barcode quality is good.
If the scanner still does not work properly, please contact your local distributor.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>