ASUS AS-UI True Wireless Bluetooth Headset User Manual

: June 13, 2024
: Asus

Table of Contents

Product specifications:
Function description:
Kind tips
Precautions:
FCC Statement
Read User Manual Online (PDF format)
Download This Manual (PDF format)

True wireless Bluetooth headset
*Special statement: This product is prohibited to use the quick-charge charging head, the manufacturer will not be responsible for the product damage caused by improper use.

Product specifications:

Product model: AS-UI
Product pairing name :AS-UI
Track system: wireless stereo
Control mode: Touch
Headset playing time: about 4 hours
Bluetooth effective distance: 210m
Headset power amplifier type: built-in chip

Electrical parameters of charging compartment

Charging bay Charging port :Type-c
Input voltage and current of charging bin: 5V1A
Charging bin output voltage: 5V+0.2V
Headset battery capacity: 30MAH
Charging bin battery capacity :180MAH
Wired charging current of charging bin: 200+ 20MAH
ired charging time of charging bin:<1.5 H
Over-discharge protection: 3.1V

Function description:

Power on: “1: Take out the earphone to power on automatically ‘2: long press 2s before connection
Power off ::1) Put the earphone into the charging bin to power off and charge it ‘2! long press 5s before connection to power off ‘3: when the phone is not connected, it will automatically power off after five minutes
TWS pairing is successful: when the left and right earphones are powered on, the left and right earphones will be paired with each other immediately.
After the pairing is successful, enter the pairing mode
Bluetooth is connected: O headset enters the pairing state, the mobile phone finds the Bluetooth pairing name, click to connect 2) has connected to the Bluetooth device, after turning on the left and right earphones automatically connect back to the host and automatically connect to the last connected one If the device fails to connect back, the headset enters the pairing state, and it will prompt “Bluetooth connected”
Bluetooth has been disconnected: O Manually turn off the Bluetooth end of the mobile phone, and the headset enters pairing mode. 2 The headset is disconnected from the mobile phone after being out of range. It will return to the effective distance range within 5 minutes, and it can be connected to the mobile phone normally. After 5 minutes, it will automatically shut down. It will prompt “Bluetooth disconnected”
Pause/Play: Click any earphone music to listen
Up and down song: Double-click any earphone to up and down songs
Add volume: Triple-click any earphone to switch volume addition and subtraction
Voice assistant: Long press 2s any headset: will prompt “Dong”
Incoming call: The other party is calling; there will be a “system prompt tone”
Answer: Click any headset
Hang up: click any headset
Rejection: long press any headset MFB button:
Low battery power: When the battery power is 2096 hours, it will prompt “battery power low” once every 5 minutes:
During headphone charging: the red light of the headphone remains on, while the white light of the charging compartment remains on
The headset is fully charged: the red light of the headset is off, and the white light of the charging compartment is off
Charging in the charging compartment: the orange light flashes slowly
The charging compartment is fully charged: the orange light is always on
Game mode: press and hold any headset MFB button for 5s, there will bea “voice prompt”

Kind tips

During the charging process of the earphone, the earphone is turned off and will be disconnected from the mobile phone. The power adapter must be 5vV + 02V
After the headset is turned on, if the mobile phone does not search for the headset, you can turn off the Bluetooth of the mobile phone and then turn on the Bluetooth of the mobile phone, and the mobile phone will search again.
When the earphones are silent on one side, please check whether the charging compartment and the charging terminals at the bottom of the earphones are dirty. If they are dirty, use a cotton swab to clean them or put the left and right ears back into the charging compartment for about 5

Precautions:

Do not use corrosive cleaning agents to clean this product.
Do not let this product be heated or near a fire source.
Do not expose this product to direct sunlight for a long time.
Do not dispose of this product in fire to avoid explosion.
Do not try to disassemble the product for any modification.
If you do not use this product for a long time, please store it ina dry environment, and charge the headset at least once a month to prolong the life, avoid extreme temperature and dust.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.