DOMETIC GP-LIFEPO4-100 Advanced Lithium App User Guide

June 13, 2024
Dometic

DOMETIC-logo

DOMETIC GP-LIFEPO4-100 Advanced Lithium App

DOMETIC-GP-LIFEPO4-100-Advanced-Lithium-App-product-
image

Go Power! Connect

ADVANCED LITHIUM APP
Quick Start Guide

  1. Load the “Go Power Connect!” app and “Add Device” for the GP-ADV-Lithium Battery.

  2. DOMETIC-GP-LIFEPO4-100-Advanced-Lithium-App-01Setup only one “Master” battery by pressing SETUP and configure each individual battery. DOMETIC-GP-LIFEPO4-100-Advanced-Lithium-App-09NOTE: There may not be more than one battery displayed if multiple batteries aren’t connected on the same RV-C network. Please ensure cabling between each battery is connected if multiple batteries are used.

  3. In each individual battery’s Setup screen, set the Battery Instance Configuration through the “Change Battery Instance”, “Series String, and its priority (“Master/Secondary”).
    DOMETIC-GP-LIFEPO4-100-Advanced-Lithium-App-03

  4. Set the Battery Instance to assign different instances for each battery.

  5. Batteries in series must have the SAME series string value. Batteries wired in parallel must be DIFFERENT from each other.

  6. There must be only one master per DC source. All other batteries on the DC source must be in “secondary”.

  7. Once all batteries are configured properly and there’s one Master battery in the network press load system to run the main functionalities! DOMETIC-GP-LIFEPO4-100-Advanced-Lithium-App-04

Monitor:

  • Battery Voltage
  • Soc, DC Current
  • Power
  • Ah Remaining
  • Charge State
  • Time Remaining
  • Battery Temperature DOMETIC-GP-LIFEPO4-100-Advanced-Lithium-App-05

Read Detailed Information:

  • High & Low Voltage Disconnect limits
  • Low Soc Limits
  • Desired Voltage &. Current
  • Discharge & Charge Bus switch statuses
  • Of Charge Cycles

  • Deepest & Average Discharge Depth
  • And more! DOMETIC-GP-LIFEPO4-100-Advanced-Lithium-App-06

Settings:

  • Toggle the DC source power to turn off & on all the batteries configured to this DC Source.
  • Toggle the DC charge switch to disable & enable the charge path to all the batteries configured to this DC Source.
  • Toggle the Battery’s Internal Heater:
    • Automatic: Will turn on the heater automatically based on the tempera­ture.
    • On: Will turn on if the Battery is Cold
    • Off: Will disable the Re-configure multiple batteries in series or parallel in the “DC Setup Screen”

Track:

  • Ah Today, Yesterday, 2 days ago, and 7 days ago

DOMETIC

gpeIectric.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals