belling 603ANG Black 60cm Chimney Cooker Hood User Manual

: June 13, 2024
: belling

Table of Contents

belling 603ANG Black 60cm Chimney Cooker Hood
Product Usage Instructions
SAFETY INFORMATION
CONTROLS
USE
CLEANING AND MAINTENANCE
LIGHTING
TECHNICAL DATA
Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

belling 603ANG Black 60cm Chimney Cooker Hood

Product Information

The product is a range of chimney hoods manufactured by BEL. The available models include BEL CHIM 603PYR, BEL CHIM 603T, BEL CHIM 803T, BEL CHIM 603ANG, and BEL CANOPY 603INT. The product is designed for use in Great Britain, Netherlands, Germany, Austria, France, Poland, Sweden, and Republic of Ireland. It is manufactured by Glen Dimplex Home Appliances and Glen Dimplex Benelux B.V. The contact information for customer support and warranty registration can be found on the respective websites of Belling, Stoves, Sagoma, Cooking Store, and Dimpco.

Product Usage Instructions

Warranty: The appliance comes with a 24-month guarantee against electrical and mechanical breakdown. Register online or by phone to avail the warranty. Refer to the manufacturer’s website for full terms and conditions.
Safety Information:
- Read the manual carefully before installation and use for safety and correct operation of the appliance.
- Keep the instructions with the appliance even if you move or sell it.
- Users must fully understand the operation and safety features of the appliance.
- Ensure wire connection is done by a specialized technician to avoid injury or damage.
- Maintain a minimum safety distance of 650mm between the hob and the suction hood (some models may have lower height requirements).
- Check that the mains voltage matches the rating label inside the hood.
- Incorporate means for disconnection in accordance with wiring rules.
- For Class I appliances, ensure proper earthing of the domestic power supply.
- Connect the hood to the exhaust flue using a pipe with a minimum diameter of 120mm. Keep the flue route as short as possible.
- Comply with all air venting regulations, especially when used with non-electric appliances (e.g. gas).
- Ensure sufficient room aeration to prevent exhaust backflow when using the hood with non-electric appliances.
- Discharge the air into a flue that is compliant with regulations and prevents fumes from being drawn back into the room.

SAFETY INFORMATION

For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it. Users must fully know the operation and safety features of the appliance
The wire connection has to be done by specialised technician.

The manufacturer shall not be held liable for any injury or damage caused by improper installation or use.
The minimum safety distance between the hob and the suc- tion hood is 650 mm (some models may be fitted at a lower height; please see the paragraph relating to working dimensions and installation).
If the instructions for installa- tion of the gas hob specify a distance greater than the one indicated, this must be taken into account.
Check that the mains voltage corresponds to the one indicated on the rating label affixed inside the hood.
Means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
For Class I appliances, check that the domestic power supply is adequately earthed.
Connect the hood to the exhaust flue using a pipe with a minimum diameter of 120 mm. The route of the flue must be as short as possible.
All the air venting regulations must be complied with.
Do not connect the hood to exhaust ducts carrying combustion fumes (boilers, fireplaces, etc.).
If the hood is used in con-junction with non electric appliances (e.g. gas), a sufficient degree of aeration must be guaranteed in the room to prevent any exhaust backflow. The negative pressure in the room must not exceed 0.04 mbar to prevent fumes being drawn back into the room by the hood.
The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or other fuels.
If the supply cord is dam-aged, it must be replaced by the manufacturer or its service technician.
Connect the plug to a socket that complies with current regulations and is in an accessible position.
As regards the technical and safety measures to be taken for fume discharging, it is important that the regu-lations set by local autho-rities must be complied with.
CAUTION: remove the protective films before in- stalling the hood.
Only use screws and hardware of a sort suitable for the hood.
CAUTION: failure to install the screws or fixing devices as described in these instructions may mean there is a risk of electric shocks.
Do not look directly at the light through optical devices (binoculars,magnifying glasses…)
Do not flambé food under the hood: you might cause a fire.
This appliance may be used by children over the age of 8 years and by persons with limited psycho-physical and sensory abilities or with in-sufficient experience and knowledge, provided they are carefully supervised and instructed on how to use the appliance safely and on the dangers that it involves.
Cleaning and maintenance to be performed by the user must not be carried out by children, unless they are under supervision.
Supervise children, to make sure they do not play with the appliance.
The appliance must not be used by persons (including children) with limited psycho-physical or sensory capa-cities or with insufficient experience and knowledge, unless they are carefully supervised and instructed.
Accessible parts may become extremely hot during the use of cooking appliances.
Clean and/or replace the filters after the period of time indicated (danger of fire). See the paragraph on Maintenance and cleaning.
The room must be adequately ventilated when the hood is used simul-taneously with appliances that use gas or other fuels (not applicable to app-liances that only discharge air into the room).
The symbol on the product or on its packaging indicates that the product must not be treated as household waste. Disposed of at a specialist recycling centre for electrical and electronic components. By making sure that this product is correctly disposed, you will help prevent potential negative consequences for the environment and human health that might result from its improper disposal. For more detailed information on how to recycle this product, please contact your local council offices, local waste disposal service or the shop in which the product was purchased.

CONTROLS

BEL CHIM 603PYR
BEL CHIM 603T
BEL CHIM 803T

Warning: Button T1 will switch the motor to speed 1 before stopping it.

BEL CHIM 603ANG

BEL CANOPY 603INT

BUTTON	FUNCTIONS
L	Turns the lighting system on and off

V

| Slide to set the speed: 0: Motor off

1: Low, used for continous and silent air change in the presence of light cooking vapour

2: Medium, suitable for most operating conditions

3. Maximum: used for removing highest cooking

vapour emission, including long periods

USE

The extractor hood has been designed exclusively for domestic use, to eliminate kitchen odours.
Never use the hood for purposes other than those for which it was designed.
Never leave naked flames under the hood when it is in operation.
Adjust the intensity of the flame so that it is directed onto the bottom of the cooking pan, making sure it does not engulf the sides.
Deep-fryers must be kept under constant supervision when in use: overheated oil may catch fire.

CLEANING AND MAINTENANCE

The activated charcoal filter cannot be washed or regenerated, and must be changed approximately every 4 months of operation, or less in the case of intensive use. See below diagrams on how to install the charcoal filters.

(W): BEL CHIM 603PYR / 603ANG

(T): BEL CHIM 603T / 803T

(C): BEL CANOPY 603INT

The grease filters must be cleaned every 2 months of operation, or more frequently in the case of particularly intensive use. They can be washed in a dishwasher (Z).
Clean the hood using a damp cloth and neutral liquid detergent

LIGHTING

Replacement parts can be optained from our Customer Care (details at the beginning of the handbook)
Lamps in risk group 1 under IEC/ EN62471 at a distance of 20cm and in exempt from risk group under IEC/ EN62471 at a distance of 30cm.
BEL CHIM 603PYR: refer to (L) to remove cover that protects the lamp.
Be careful of sharp edges when changing the light bulb.

TECHNICAL DATA

		BEL CHIM 603PYR	BEL CHIM 603T BEL CHIM 803T
Electricity Supply	230 – 240V ~ 50/60Hz
Classification	Class I

Noise Level (External Venting)
Boost| (dBA)| N/A| N/A
Position 3| (dBA)| 63| 65
Position 1| (dBA)| 45| 46
Motor Rating (W)| 160| 160
Grease Filters| 2| 2
Carbon Filters| 1| 1
Extraction rate (External Venting)
Boost| (m3/h)| N/A| N/A
Position 3| (m3/h)| 600| 580
Position 1| (m3/h| 260| 250
| | BEL CHIM 603ANG| BEL CANOPY 603INT
---|---|---|---
Electricity Supply| 230 – 240V ~ 50/60Hz
Classification| Class I
Noise Level (External Venting)
Boost| (dBA)| 67| N/A
Position 3| (dBA)| 64| 70
Position 1| (dBA)| 51| 54
Motor Rating (W)| 160| 110
Grease Filters| 2 of aluminium| 1 of aluminium
Carbon Filters| 1| 2
Extraction rate (External Venting)
Boost| (m3/h)| 710| N/A
Position 3| (m3/h)| 640| 390
Position 1| (m3/h| 67| 180

The carbon filters are available as spare parts. Please contact our after sales team for more details.

Warranty

Your new appliance comes with our 24-month guarantee, protecting you against electrical and mechanical breakdown. Register online or by phone. For full terms & conditions of the manufacturer’s guarantee, please refer to the website above. Our policy is one of the constant development and improvement, therefore we cannot guarantee the strict accuracy of all our illustrations and specifications. Changes may have been made after publishing.