BOSCH PXY8 Induction Hob Instructions

June 13, 2024
Bosch

PXY8 Induction Hob
Instructions BOSCH PXY8 Induction HobRegister your new device on MyBosch now and get free benefits:
bosch-home.com/welcome

Futher information and explanations are available online:BOSCH PIE811B15E
Induction Hob with Integrated Ventilation System - qr
code

https://digitalguide.bsh-group.com/mat- no=9001696762&brand=BOSCH&name=induction%20hob%20with%20integrated%20ventilation%20system&vib=PIE8..B15.&default=en

Safety

Observe the following safety instructions.
1.1 General information

  • Read this instruction manual carefully.
  • Keep the instructions, the appliance pass, and the product information safe for future reference or for the next owner.
  • Do not connect the appliance if it has been damaged in transit.

1.2 Intended use
Only a licensed professional may connect appliances without plugs. Damage caused by incorrect connection is not covered under the warranty. The appliance can only be used safely if it is correctly installed according to the safety instructions. The installer is responsible for ensuring that the appliance works perfectly at its installation location. Only use this appliance:

  • To prepare meals and drinks.
  • Under supervision. Never leave the appliance unattended when cooking for short periods
  • In private households and in enclosed spaces in a domestic environment
  • Up to an altitude of max. 2000 m above sea level. Do not use the appliance:
  • On boats or in vehicles.
  • With an external timer or a separate remote control. This does not apply if the operation with appliances included in EN 50615 is switched off.
  • To extract hazardous or explosive substances and vapors.
  • To extract small parts and liquids.

If you wear an active implantable medical device (e.g. a pacemaker or defibrillator), check with your doctor that it complies with Council Directive 90/385/EEC of 20th June 1990, EN 45502-2-1 and EN 45502-2-2 and that it has been chosen, implanted and programmed in accordance with VDE-AR-E 2750-10. If these conditions are satisfied, and if, in addition, non-metal cooking utensils and cookware with non-metal handles are used, it is safe to use this induction hob as intended. If these conditions are satisfied, and if, in addition, non-metal cooking utensils and cookware with non-metal handles are used, it is safe to use this induction hob as intended.
1.3 Restriction on user group
This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers. Children must not play with the appliance. Children must not perform cleaning or user maintenance unless they are at least 15 years old and are being supervised. Keep children under the age of 8 years away from the appliance and power cable.
1.4 Safe use
WARNING  ‒ Risk of suffocation! Children may breathe in or swallow small parts, causing them to suffocate.

  • Keep small parts away from children
  • Do not let children play with small parts. Children may put packaging material over their heads or wrap themselves up in it and suffocate.
  • Keep packaging material away from children.
  • Do not let children play with packaging material.

WARNING ‒ Risk of poisoning! Risk of poisoning from flue gases being drawn back in. Room-air-dependent heat-producing appliances (e.g. gas, oil, wood or cooperate heaters, continuous flow heaters or water heaters) obtain combustion air from the room in which they are installed and discharge the exhaust gases into the open through an exhaust gas system (e.g. a chimney). With the extractor hood switched on, air is extracted from the kitchen and the adjacent rooms. Without an adequate supply of air, the air pressure falls below atmospheric pressure. Toxic gases from the flue or the extraction shaft are sucked back into the living space.

  • Always ensure adequate fresh air in the room if the appliance is being operated in exhaust air mode at the same time as a room-air-dependent heat-producing appliance is being operated.

  • It is only possible to safely operate the appliance if the pressure in the room in which the heating appliance is installed does not drop more than 4 Pa (0.04 mbar) below atmospheric pressure. This can be achieved whenever the air needed for combustion is able to enter through openings that cannot be sealed, for example in doors, windows, incoming/exhaust air wall boxes or by other technical means. An incoming/exhaust air wall box alone does not ensure compliance with the limit.

  • In any case, consult your responsible chimney sweep. They are able to assess the house’s entire ventilation setup and will suggest suitable ventilation measures to you.

  • Unrestricted operation is possible if the appliance is operated exclusively in circulating-air mode.
    WARNING  ‒ Risk of fire! Leaving fat or oil cooking on an unattended hob can be dangerous and may lead to fires.

  • Never leave hot oil or fat unattended.

  • Never attempt to extinguish a fire using water; instead, switch off the appliance and then cover it with a lid or a fire blanket. The cooking surface becomes very hot.

  • Never place flammable objects on the cooking surface or in its immediate vicinity.

  • Never place objects on the cooking surface. The appliance will become hot.

  • Do not keep combustible objects or aerosol cans in drawers directly underneath the hob. Hob covers can cause accidents, for example, due to overheating, catching fire or material shattering.

  • Do not use hob covers. After every use, switch off the hob using the main switch.

  • Do not wait until the hob turns off automatically as there are no longer any pots and pans on it. Fatty deposits in the grease filters may catch fire.

  • Never operate the appliance without a grease filter.

  • Clean the grease filters regularly.

  • Never work with naked flames close to the appliance (e.g. flambéing).

  • Do not install the appliance near a solid fuel heating appliance (e.g. wood- or coal-burning) unless the heating appliance has a sealed, non-removable cover. There must be no flying sparks.
    WARNING ‒ Risk of burns! The appliance and its parts that can be touched become hot during use, particularly the hob surround, if fitted.

  • Caution should be exercised here in order to avoid touching heating elements

  • Young children under 8 years of age must be kept away from the appliance. The hotplate heats up but the display does not work.

  • Switch off the fuse in the fuse box.

  • Call the customer service. Hob protective grilles may cause accidents.

  • Never use hob protective grilles. Metal objects on the hob quickly become very hot.

  • Never place metal objects (such as knives, forks, spoons and lids) on the hob. The appliance becomes hot during operation.

  • Allow the appliance to cool down before cleaning.

  • If hot liquids penetrate the appliance, only remove the grease filter or the overflow container once the appliance has cooled down.
    WARNING ‒ Risk of electric shock! Incorrect repairs are dangerous.

  • Repairs to the appliance should only be carried out by trained specialist staff.

  • Only use genuine spare parts when repairing the appliance.

  • If the power cord of this appliance is damaged, it must be replaced with a special connection cable, which is available from the manufacturer or his Customer Service. If the appliance or the power cord is damaged, this is dangerous.

  • Never operate a damaged appliance.

  • Never operate an appliance with a cracked or fractured surface.

  • Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.

  • If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box.

  • Call customer services. → Page 20 An ingress of moisture can cause an electric shock.

  • Do not use steam- or high-pressure cleaners to clean the appliance. The insulation on cables of electrical appliances may melt if it touches hot parts of the appliance.

  • Never bring electrical appliance cables into contact with hot parts of the appliance.
    WARNING ‒ Risk of injury! Saucepans may suddenly jump due to liquid between the saucepan base and the hotplate.

  • Always keep hotplates and saucepan bases dry

  • Never use icy-cold cookware that has been in the freezer. When cooking in a bain Marie, the hob and cooking container could shatter due to overheating.

  • The cooking container in the bain Marie must not directly touch the bottom of the water-filled pot.

  • Only use heat-resistant cookware. An appliance with a cracked or broken surface can cause cuts.

  • Do not use the appliance if it has a cracked or broken surface.

Avoiding material damage

This is where you can find the most common causes of damage and tips on how to avoid them.

Damage Cause Action
Stains Unsupervised cooking process. Monitor the cooking process.
Stains, blisters Spilled food, especially food with high sugar content.

Remove immediately with a glass scraper.
Stains, blisters or fractures in the glass| Defective cookware, cookware with melted enamel or cookware with copper or aluminum base.| Use suitable cookware that is in a good condition.
Stains, discoloration| Unsuitable cleaning methods.| Only use cleaning agents that are suitable for glass ceramic, and only clean the hob when it is cold.
Blisters or fractures in the glass| Knocks or falling cookware, cooking ac- accessories or other hard or pointed objects.| When cooking, do not hit the glass or let objects fall onto the hob.
Scratches, discoloration| Rough cookware bases or moving the cookware on the hob.| Check the cookware. Lift the cookware when moving it.
Scratches| Salt, sugar or sand.| Do not use the hob as a work surface or storage space.
Damage to the appliance| Cooking with frozen cookware.| Never use frozen cookware.
Damage to the cookware or the appliance| Cooking without contents.| Never place or heat empty cookware on a hot cooking zone.
Glass damage| Melted material on the hot cooking zone or hot pot lid on the glass.| Do not place greaseproof paper or aluminum foil nor plastic containers or pot lids on the hob.
Overheating| Hot cookware on the control panel or on the frame| Never place hot cookware on these areas.

 Environmental protection and saving energy

3.1 Disposing of packaging
The packaging materials are environmentally compatible and can be recycled.

  • Sort the individual components by type and dispose of them separately.

3.2 Saving energy
If you follow these instructions, your appliance will use less energy. Select the cooking zone to match the size of your pan. Center the cookware on the hob. Use cookware whose base diameter is the same diameter as the hotplate. Tip: Cookware manufacturers often give the upper diameter of the saucepan. It is often larger than the base diameter.

  • Unsuitable cookware or incompletely covered cooking zones consume a lot of energy. Cover saucepans with suitable lids.
  • Cooking without a lid consumes considerably more energy. Lift lids as infrequently as possible.
  • When you lift the lid, a lot of energy escapes. Use a glass lid.
  • You can see into the pan through a glass lid without having to lift it. Use pots and pans with flat bases.
  • Uneven bases increase energy consumption. Use cookware that is suitable for the quantity of food.
  • Large items of cookware containing little food need more energy to heat up. Cook with only a little water.
  • The more water that is contained in the cookware, the more energy is required to heat it up. Turn down to a lower power level early on. Use a suitable ongoing power level.
  • If you use an ongoing power level that is too high, you will waste energy. Adjust the fan speed to the amount of steam produced during cooking.
  • The lower the fan speed, the less energy is consumed. If cooking produces large amounts of steam, select a higher fan speed in good time.
  • The odors are distributed around the room less. Switch the appliance off when you are not using it.
  • Ensure that there is sufficient ventilation when cooking.
  • The appliance works more efficiently and with fewer operating noises. Clean or replace the filters at regular intervals.
  • The effectiveness of the filter is retained. Product Information according (EU) 66/2014 can be found on the attached appliance pass and online on the product page for your appliance.

 Suitable cookware

Cookware that is suitable for induction cooking must have a ferromagnetic base, i.e. it must be attracted by a magnet. The base must also match the size of the cooking zone. If the cookware is not detected on a cooking zone, place this on the cooking zone with the next smallest diameter.
4.1 Size and characteristics of the cookware
To correctly detect the cookware, take the size and the material of the cookware into consideration. All cookware bases must be perfectly flat and smooth. You can use the Cookware test to check whether your cookware is suitable. You can find more information about this under → “Cookware test”, Page 13.

Cookware Materials Properties

Recommended cookware
| Stainless steel cookware in a sandwich design that distributes the heat well.| This cookware distributes the heat evenly, heats up quickly, and ensures that it can be detected easily.
Ferromagnetic cookware is made of enameled steel, cast iron or special induction cookware made of stainless steel.| This cookware heats up quickly and ensures that it can be detected easily.
Suitable
| The base is not fully ferromagnetic.| If the ferromagnetic area is smaller than the
base of the cookware, only the area that is
ferromagnetic heats up. As a result, the heat
is not distributed evenly.
Cookware bases with an aluminum content| These reduce the ferromagnetic area, which
means that less power is emitted to the cookware. This cookware may not be efficiently detected or may not be detected at all, and therefore does not heat sufficiently.
Not suitable| Cookware is made from normal thin steel, glass, clay, copper or aluminum.|

Notes

  • Do not use adapter plates between the hob and the cookware.
  • Do not heat up empty cookware and do not use cookware with a thin base, as this may become very hot.

Familiarising yourself with your appliance

5.1 Cooking with induction
In comparison to conventional hobs, induction technology brings with it a series of changes and has a number of benefits such as time savings when cooking and frying, energy savings as well as greater ease of cleaning and care. It also offers improved heat control as the heat is generated directly in the cookware.
5.2 Your new appliance
Information about your new applianceBOSCH PIE811B15E Induction Hob with
Integrated Ventilation System - fig 5

No. Designation
1 Grease filter
2 Odour filter for circulating-air mode or acoustics filter for air

extraction mode
3| Hob
4| Control panel
5| Overflow container
¹ Depending on the appliance specifications.

5.3 Special accessories
Depending on the appliance model, various accessories are available and you can obtain these from specialist retailers, from our after-sales service or from our official website.

  • Air extraction set
  • Air recirculation se
  • Odour filter for recirculating air mode
  • Acoustics filter for air extraction mode

5.4 The control panel
Individual details, such as colour and shape, may differ from the figure.BOSCH PIE811B15E Induction Hob with Integrated Ventilation System -
fig 4

Selection sensors

Sensor Function
Main switch
Selecting the cooking zone
Selecting settings
PowerBoost function Intensive ventilation setting
Timer function
Childproof lock
Manual ventilation control

Displays

Display Function
Operating status
Power levels
Ventilation settings
Residual heat
Power Boost function intensive ventilation setting
Time-setting options

Touch fields and displays
Touch a symbol to activate the function it represents.

  • Always keep the control panel clean and dry. Moisture impairs the function.
  • Do not place any cookware near the indicators or sensors. The electronics may overheat.

5.5 Distribution of the cooking zones
The specified power has been measured with the standard pots, which are described in IEC/EN  60335-2-6. The power may vary depending on the sizeof the cookware or  cookware material.BOSCH PIE811B15E Induction Hob with
Integrated Ventilation System - fig 6

Area Highest power level
 A 21 cm dia- Power level 9
meter PowerBoost
Area Highest power level
--- ---
 18 cm dia- Power level 9
meter PowerBoost

5.6 Cooking zone
Before you start cooking, check whether the size of the cookware fits the cooking zone that you want to use for cooking:

Area Cooking zone type
O Single-circuit cooking zone

5.7 Residual heat indicator
The hob has a residual heat indicator for each cooking zone. Do not touch the cooking zone if the residual heat indicator is lit.

Display Meaning
The cooking zone is hot.
The cooking zone is warm.

 Operating modes

You can use your appliance in air extraction mode or circulating-air mode.
6.1 Air extraction mode
The air which is drawn in is cleaned by the grease filters and conveyed to the exterior by a pipe system.
BOSCH PIE811B15E Induction Hob with Integrated Ventilation System - fig
7The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or other fuels (not applicable to appliances that only discharge the air back into the room). ¡ If the exhaust air is to be conveyed into a non-functioning smoke or exhaust gas flue, you must obtain the consent of the heating engineer responsible. ¡ If the exhaust air is conveyed through the external wall, a telescopic duct should be used.
6.2 Air recirculation mode
The air which is drawn in is cleaned by the grease filters and an odor filter and conveyed back into the room.
To bind odors in circulating-air mode, you must install an odour filter. The different options for operating the appliance in circulating-air mode can be found in our catalog. Alternatively, ask your dealer. The required accessories are available from specialist retailers, from customer service or from the Online Shop.

 Before using for the first time

Observe the following recommendations.
7.1 Preparing the appliance
To ensure correct operation, you must arrange the components in this order:

  1. Insert the filter.
  2. Insert the metal grease filter.
    Note: Never operate the appliance without the metal grease filter and the overflow container.

7.2 Setting the operating mode
The appliance is supplied with a preset circulating-air mode. When your hob is installed with an air outlet to the outside, you must configure the setting to this mode. You can  find additional information about this in the section entitled → “Basic settings”, Page 12

Basic operation

8.1 Switching the hob on and off

  • Switch the hob on and off using the main switch. If all of the cooking zones are switched off for longer than 20 seconds, the hob is automatically switched off.
    ReStart

  • If you switch the appliance on within four seconds of switching it off, the hob operates with the settings that were previously set.

8.2 Setting the cooking zones
To choose the required selectable power level, touch or.
Each power level has an intermediate level. This is marked with a dot.

Power level

| Lowest power level
| Highest power level

Selecting the cooking zone and power setting

  1. Touch to select the cooking zone.
  2. Within the next 10 seconds, select the required power level:
    ‒ Touch to call up the power level.
    ‒ Touch to call up the power level. The power level has been set.
    Note: If no cookware is placed on the cooking zone or the pot is not suitable, the selected power level flashes. After a certain period of time, the cooking zone switches itself off.

QuickStart

  • If you place cookware on the hob before you switch it on, the cookware is detected when you switch on and the corresponding cooking zone is selected automatically. Select the power level in the next 20 seconds, or the hob switches itself off.

Changing the power level and switching off the cooking zone

  1. Select the cooking zone.
  2. Touch or until the required power level appears. To switch off the cooking zone, set .

Switching off the cooking zone quickly
Touch and hold the symbol for the cooking zone for three seconds. The cooking zone switches itself off.

8.3 Cooking Tips

  • When heating up puree, cream soups or thick sauces, stir occasionally.
  • To preheat, set the power level 8-9.
  • When cooking with the lid on, reduce the power level as soon as you see steam escaping. The cooking result is not affected by the steam escaping
  • After cooking, place a lid on the cookware until you serve the dish.
  • To cook with the pressure cooker, observe the manufacturer’s instructions.
  • Do not cook food for too long, otherwise, nutrients will be lost. The kitchen timer enables you to set the optimal cooking time.
  • Ensure that the oil does not smoke
  • To brown the food, fry it in small portions, one after the other
  • Some items of cookware may reach high temperatures while the food is cooking. You should therefore use oven gloves.
  • You can find recommendations for energy-efficient cooking under → “Saving energy”, Page 5

Cooking recommendations
The table shows which power level ( ) is suitable for which food. The cooking time ( ) may vary de- pending on the type, weight, thickness and quality of the food.

| min
---|---
Melting| |
Chocolate coating| 1 – 1.| –
Butter, honey, gelatine| 1 – 2| –
Heating and keeping warm| |
Stew, e.g. lentil stew| 1. – 2|
Milk’| 1. – 2.| –
Boiled sausages’| 3 – 4| –
Defrosting and heating| |
Spinach, frozen| 3 – 4| 15 – 25
Goulash, frozen| 3 – 4| 35 – 55
Poaching, simmering| |
Potato dumplings ‘| 4. – 5.| 20 – 30
Fish’| 4 – 5| 10 – 15
White sauces, e.g. Béchamel sauce| 1 – 2| 3 – 6
Whisked sauces, e.g.
Béarnaise sauce, Hollandaise sauce| 3 – 4| 8 – 12
Boiling, steaming, braising| |
Rice, with double the volume of water| 2. – 3.| 15 – 30
Rice pudding 2| 2 – 3| 30 – 40
Unpeeledboiled pots| 4. – 5.| 25 – 35
‘ Without lid 2 Preheat to power level 8 – 8.| |

| min
---|---
Boiled potatoes| 4. – 5.| 15 – 30
Pasta ‘| 6 – 7| 6 – 10
Stew| 3. – 4.| 120 –
180
Soups| 3. – 4.| 15 – 60
Vegetables| 2.- 3.| 10 – 20
Vegetables, frozen| 3.- 4.| 7 – 20
Stew in a pressure cooker| 4. – 5.| –
Stewing| |
Rolled roasting joint| 4 – 5| 50 – 65
Pot roast| 4 – 5| 60 – 100
Goulash 2| 3 – 4| 50 – 60
Braising/frying with a small amount of fat| |
Escalope, plain or breaded| 6 – 7| 6 – 10
Escalope, frozen| 6 – 7| 6 – 12
Chops, plain or breaded| 6 – 7| 8 – 12
Steak (3 cm thick)| 7 – 8| 8 – 12
Poultry breast (2 cm thick)| 5 – 6| 10 – 20
Poultry breast, frozen| 5 – 6| 10 – 30
Rissoles (3 cm thick)| 4. – 5.| 20 – 30
Hamburgers (2 cm thick)| 6 – 7| 10 – 20
Fish and fish fillet, plain| 5 – 6| 8 – 20
Fish and fish fillet, breaded| 6 – 7| 8 – 20
‘ Without lid 2 Preheat to power level 8 – 8.| |
| |
---|---|---
Fish, breaded and frozen, e.g. fish fingers| 6 – 7| 8 – 15
Prawns and scampi| 7 – 8| 4 – 10
Sautéing fresh vegetables and mushrooms| 7 – 8| 10 – 20
Stir-fry, vegetables, meat cut in strips Asian-style| 7 – 8| 15 – 20
Frozen dishes, e.g. stir-fries| 6 – 7| 6 – 10
Pancakes, cooked one after the other| 6. – 7.| –
Omelette (cooked one after the other)| 3. – 4.| 3 – 10
Fried eggs| 5 – 6| 3 – 6
Deep-frying, 150–200 g per portion in 1–2 l oil, deep-fat fried in portions 1| |
Frozen products, e.g. chips, chicken nuggets| 8 – 9| –
Croquettes, frozen| 7 – 8| –
Meat, e.g. chicken portions| 6 – 7| –
Fish, breaded or battered| 6 – 7| –
Vegetables, mushrooms, breaded, beer-battered or tem- pura| 6 – 7| –
Small baked items, e.g. doughnuts, battered fruit| 4 – 5| –
1 Without lid
2 Preheat to power level 8 – 8.| |

Hood control

You can use the hood control to control the highly efficient air extraction system that is integrated in the cooking surface.
9.1 Manual ventilation control
You can control the ventilation setting manually.
Note: Using tall items of cookware may prevent the extraction system from working at optimum power. You can improve the extraction power by placing the lid on the cookware at an angle.
Activating the manual ventilation control

  1. Touch.
    The ventilation system starts at the preset performance level.

  2. Use the   and symbols to select the required performance level within the next 10 seconds. The performance level lights up.
    Note: If you have set a cooking time or timer duration, touch to view the ventilation setting.

Changing or deactivating manual ventilation control

  1. Touch .
  2. Select the required performance level or set the   and _ symbols to.

9.2 Intensive ventilation setting
The appliance has an intensive ventilation setting. If you activate the intensive ventilation setting, the ventilation system works at maximum output for a short time.
Activating the intensive ventilation setting

  1. Touch. 
  2. Select performance level  3 and then touch. The display lights up. The intensive setting is activated.
    Note: After approx. eight minutes, the appliance automatically switches back to performance level 3.

Changing or deactivating the intensive ventilation setting

  1. Touch . 
  2. Select the required performance level or set the   and symbols to.

9.3 Automatic start for the ventilation system
If you select a power level for a cooking zone, the automatic start switches on. The ventilation system starts at the corresponding power level. You can find out how to change this setting in the section → “Basic settings”, Page 12.
9.4 Run-on function for the ventilation system
The run-on function leaves the ventilation system running for a few minutes after the hob has been switched off. This allows you to remove any cooking fumes that remain. The ventilation system then automatically switches off.
Activating the fan run-on
As standard, the run-on time is activated with a maximum switch-off time.
You can find out how to change this setting in the section → “Basic settings”, Page 12.
Note: The run-on function only switches on if at least one cooking zone has been switched on for at least one minute.
Deactivating the fan run-on Manually
To deactivate the function, touch.
Automatically
The appliance deactivates the run-on function if:

  • The run-on time has elapsed
  • You switch the appliance on again.

 Time-setting options

Your hob has various functions for setting the cooking time:

  • Switch-off timer
  • Timer

10.1 Switch-off timer
Allows you to program a cooking time for a hotplate and its automatic switch- off once the set time has elapsed.
Programming the cooking time

  1. Select the cooking zone and the required power level.

  2. Touch .
    a The display lights up in the cooking zone.

  3. Use   or   to select the cooking time. The time begins to count down.
    Note: You can automatically set the same cooking time for all cooking zones. You can find more information about this under → “Basic settings”, on Page 12.

Changing or deleting the cooking time

  1. Select the cooking zone.
  2. Touch.
  3. To change the cooking time, touch or or set it to.

10.2 Timer
Enables the activation of a timer of 0–99 minutes. This function can be used independently of the cooking zones and other settings. It does not automatically switch off the hotplates.
Setting the kitchen timer

  1. Select the hotplate and touch it twice.
    a bedside  lights up.

  2. Use or  to select the required time. The time counts down.

Changing or deleting the timer duration

  1. Touch  repeatedly until the display beside lights up.
  2. To change the cooking time, touch  or or set it to.

 PowerBoost

The PowerBoost function enables you to heat up large quantities of water faster than when using a power level. This function is available for all cooking zones, provided the other cooking zone in the same group is not in use. Otherwise, flash in the display for the selected cooking zone.  is then set automatically without activating the function.

11.1 Activating the PowerBoost function

  1. Select the cooking zone.
  2. Select the power level  9 and then touch the symbol. The display lights up. The function has been activated.

11.2 Deactivating the PowerBoost function

  1. Select the cooking zone.
  2. Touch the symbol. The display goes out and the cooking zone switches back to power level.
    The function has now been deactivated.
    Note: In certain circumstances, the PowerBoost function is automatically switched off in order to protect the electronic elements inside the hob.

 Childproof lock

The hob is equipped with a childproof lock. This prevents children from switching on the hob.
12.1 Activating the childproof lock
Requirement: The hob must be switched off.

  • Touch and hold for four seconds.
  •  The display beside lights up for 10 seconds.
  • The hob is now locked.

12.2 Deactivating the childproof lock

  • Touch and hold  for four seconds.
  • The lock is released.

12.3 Automatic childproof lock
The hob is equipped with an automatic childproof lock.
This prevents children from switching on the hob.
Activating and deactivating
You can find more information about the automatic childproof lock under → “Basic settings”, Page 12.

Individual safety switch-off

The safety function is activated if one cooking zone is in operation for an extended period and you do not change any settings. The cooking zone displays and switches itself off.  The time from 1 to 10 hours depends on the selected power level. Press any button to switch on the cooking zone

Basic settings

You can configure the basic settings for your appliance to meet your needs.

14.1 Overview of the basic settings

Display

|

Setting

|

Value

---|---|---


| Childproof lock|  – Manual.1 Automatic.
– Switched off.
****| Audible signals|  – Confirmation and fault signals are switched off.
–  Only the fault signal is switched on.
– Only the confirmation signal is switched on.
–  All signal tones are switched on 1.


| Automatic switch-off of the cooking zones.| – switched off.1
 – minutes until the appliance switches off auto- matically.


| Duration of the timer end signal tone| –  10 seconds 1
– 30 seconds
– 1 minute
1 Factory setting|

Displa

|

Setting

|

Valu

---|---|---


| Power limitation Enables the total power of the hob to be limited, if necessary, based on the conditions of your electrical installation. The available settings depend on the maximum power of the hob. You can find precise information on the rating plate. If the function is active and the hob has reached the set power limit is dis-played and you cannot select a higher power level.|  – Switched off. Maximum power of the hob 1
–  1000 W. Lowest power setting.
– 1500 W.
–  3000 W. Recommended for 13 A.
– 3500 W. Recommended for 16 A
– 4000 W.
– 4500 W. Recommended for 20 A.
Maximum power of the hob.


| Time for selecting the cooking zone|  – Unlimited: You can adjust the last selected cooking zone without having to select it again.1– Limited: You can adjust the last selected cooking zone within 10 seconds after selecting it. After this time, you must select the cooking zone again before adjusting it.


| Cookware test
You can use this function to test the quality of the cookware.|  – Not suitable.
– Not optimal.
– Suitable.


| Set circulating-air mode or air extraction mode.|  – Configure circulating- air mode.1
– Configure air extraction mode.


| Setting automatic start|  – Switched off.
– Switched on.1


| Setting the run-on
If your hob is working in air extraction mode, the ventilation system is switched on at the power level for approx. 6 minutes.
If your hob is working in a circulating-air mode, the ventilation system is switched on at the power level for approx. 30 minutes.
The run-on function automatically switches off after this time.|  – Switched off.
– Switched on 1:


| Restoring factory settings|  – Individual settings 1
– Factory settings.
1 Factory setting|

14.2 To go to the basic settings
Requirement: The hob must be switched off.

  1. To switch on the hob, touch .
  2. Within the next 10 seconds, touch and hold for four seconds.  The first four displays provide the product information. Touch or to view the individual displays.

Product information

|

Display

---|---
Directory for the technical after-sales service (TK)

Production number|
Production number 1|
Production number 2|

.

  1. Touch to access the basic settings. a and light up alternately as well as as a preset value.
  2. Touch repeatedly until the required function is displayed.
  3. Use or to elect the required value.
  4. Touch and hold  for four seconds. The settings are saved. 14.3 Exiting the basic settings ▶ Touch to switch off the hob.

14.3 Exiting the basic settings
Touch to switch off the hob.
15  Cookware test
The quality of the cookware has a major influence on the speed and the result of the cooking process.  You can use this function to test the quality of the cookware. Before the test, ensure that the size of the cookware base corresponds to the size of the cooking zone being used. Access is via the basic settings. → Page 12
15.1 Carrying out Cookware test

  1. At room temperature, place the cookware with approx. 200 ml water in the center of the cooking zone that best fits the base of the cookware in terms of size.
  2. Call up the basic settings and select.
  3.  Touch or  _ The  _ display flashes in the cooking zones.
    The function has been activated.
    After 10 seconds, the result appears in the cooking zone displays.

15.2 Checking the result
You can see what the result means for the quality and speed of the cooking process in the following table.

Result

  The cookware is not suitable for the cooking zone and therefore does not heat up.
The cookware is taking longer to heat up than ex- expected and cooking is not progressing as well as it ought to.
  The cookware is heating up correctly and cooking is progressing well.

Note: If you have any unfavorable results, reposition the cookware on a smaller cooking zone, if available. Touch or  to activate the function.

Power limitation

You can use the PowerManager function to set the total power of the hob. The hob is set at the factory; the hob’s maximum power is shown on the rating plate. You can use this function to adjust the configuration to the requirements of each electrical installation. In order to not exceed this set value, the hob automatically distributes the available power as needed between the cooking zones that are switched on. While this function is activated, the output of each cooking zone may temporarily fall below the nominal value. In order to not exceed this set value, the hob automatically distributes the available power as needed between the cooking zones that are switched on . The appliance regulates and selects the highest power level automatically. For more information, go to → “Basic settings”, Page 12

Cleaning and servicing

To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully.
17.1 Cleaning products
You can obtain suitable cleaning products and glass scrapers from customer service, a retailer or the online shop www.bosch-home.com.
ATTENTION!
Unsuitable cleaning products may damage the surfaces of the appliance.

  • Never use unsuitable cleaning products.
  • Do not use cleaning products while the hob is still hot. This may cause marks on the surface.

Unsuitable cleaning products

  • Undiluted detergents
  • Detergent intended for dishwashers
  • Abrasive cleaning products
  • Aggressive cleaning products such as oven spray or stain remover
  • Abrasive sponges
  • High-pressure or steam jet cleaners

17.2 Components to be cleaned or replaced
The following overview shows the components of the appliance that you either replace or clean.BOSCH PIE811B15E Induction Hob with Integrated Ventilation
System - fig 10

1 Grease filter
2 Odour filter or acoustics filter
3 Glass-ceramic
4 Overflow container

17.3 Cleaning the hob
Clean the hob after every use to stop cooking residues from getting burnt on.
Requirement:
The hob must be cold. Do not allow the hob to cool down if it has sugar stains, plastic or aluminum foil on it.

  1. Remove heavy soiling using a glass scraper.
  2. Clean the hob with a cleaning agent for glass ceramic. Follow the cleaning instructions on the packaging of the cleaning agent. Tip: You can achieve good cleaning results using a special sponge for glass ceramic.

17.4 Cleaning the hob surround
If the hob frame is dirty or stained after use, clean this.
Note: Do not use a glass scraper.

  1. Clean the hob frame with hot soapy water and a soft cloth. Wash new sponge cloths thoroughly before use.
  2. Dry with a soft cloth.

17.5 Changing the odour filter or acoustics filter Change the odour filter regularly.
Change the acoustics filters if they are dirty.
Note: You can obtain odor filters or acoustics filters from specialist retailers, customer service or in the online shop.

  1. To keep them in good working order, only use genuine replacement filters.

  2. ATTENTION! Falling grease filters may damage the hob below.
    ▶ Grip below the grease filter with one hand. Remove the grease filter. ‒ Grease may accumulate in the bottom of the container. Hold the grease filter level to prevent grease from dripping out
    BOSCH PIE811B15E Induction Hob with Integrated Ventilation System - fig
17

  3. Remove the four odour filters or acoustics filters, and dispose of them properly.
    BOSCH PIE811B15E Induction Hob with Integrated Ventilation System - fig
11

  4. Insert two odour filters or acoustics filters into the left and right of the appliance and slide them forwards.
    BOSCH PIE811B15E Induction Hob with Integrated Ventilation System - fig
12

  5. Insert the other odour filters or acoustics filters into the left and right of the appliance.
    BOSCH PIE811B15E Induction Hob with Integrated Ventilation System - fig
13

Insert the grease filter. Resetting the saturation indicator
BOSCH PIE811B15E Induction Hob with Integrated Ventilation System - fig
14Requirement: After the appliance is switched off, light up.

  1. Replace the odor filter. → Page 15
  2. Press and hold until an audible signal sounds. The display stops lighting up. The saturation indicator for the odour filters is reset.

17.6 Cleaning the grease filters
The grease filters filter the grease from the cooking vapour. To keep it in good working order, you must clean the grease filter regularly.
WARNING  ‒ Risk of fire! Fatty deposits in the grease filters may catch fire.

  •  Never operate the appliance without a grease filter.
  • Clean the grease filters regularly.
  • Never work with naked flames close to the appliance (e.g. flambéing).
  • Do not install the appliance near a solid fuel heating appliance (e.g. wood- or coal-burning) unless the heating appliance has a sealed, non-removable cover. There must be no flying sparks.
  1. ATTENTION! Falling grease filters may damage the hob below. Grip below the grease filter with one hand. Remove the grease filter. ‒ Grease may accumulate in the bottom of the container. Hold the grease filter level to prevent grease from dripping out. ‒
    BOSCH PIE811B15E Induction Hob with Integrated Ventilation System - fig
14

  2. Clean the grease filters. ‒ → “Cleaning the grease filters manually”, Page 16 ‒ → “Cleaning the grease filter in the dishwasher”, Page 16

  3. If required, remove the odour filters or acoustics filters and clean the appliance from the inside. → “Changing the odor filter or acoustics filter”, Page 15

  4. If any objects get into the appliance, remove these objects and ensure that the supply to the overflow container is not blocked.

  5. Wipe out the inside of the appliance with soapy water and a dish cloth.

  6. After cleaning, reinsert the dried metal grease filter.

Cleaning the grease filters manually

  1. Dismantle the grease filter
    BOSCH PIE811B15E Induction Hob with Integrated Ventilation System - fig
16

  2. Soak the grease filter in hot soapy water.

  3. Use a brush to clean the grease filter. Do not use aggressive, acidic or alkaline cleaning products. Use special grease solvent for stubborn dirt. You can purchase the grease solvent from the aftersales service, through our online shop or in a specialist shop.

  4. Rinse the grease filters thoroughly.

  5. Allow the grease filters to drain.

Cleaning the grease filter in the dishwasher

  1. Dismantle the grease filter.BOSCH PIE811B15E Induction Hob with Integrated Ventilation System - fig 16
  2. Place the grease filters loosely in the dishwasher and do not jam it in. For optimum cleaning results, lay the grease filter on the filter side in the dishwasher. Do not clean heavily soiled grease filters with utensils. Do not use aggressive, acidic or alkaline cleaning products.
  3. Start the dishwasher. Select a temperature of no more than 70 °C.
  4. Allow the grease filters to drain.

17.7 Cleaning the overflow container
The overflow container collects liquids or objects that come into the appliance from above.
Requirement: The appliance has cooled and the residual heat indicator has gone out.

  1. Hold the overflow container with one hand and unscrew it with the other hand.
    ‒ Hold the overflow container level to prevent liquid from leaking out.
    BOSCH PIE811B15E Induction Hob with Integrated Ventilation System - fig
19

  2. Empty the overflow container and rinse it out.

  3. If required, unscrew the screw and clean the overflow container without the screw in the dishwasher.

  4. Clean the overflow container before screwing it back into place.

  5. Ensure that the supply to the overflow container is not blocked. Remove any objects that have entered the appliance once it has cooled down. To do this, remove the grease filter. → Page 16

FAQs

18.1 Using the appliance

Question

|

Answer

---|---
Why can I not switch on the hob and why is the child-proof lock symbol lit?| ◾ The childproof lock is activated. You can find further information about this func- tion under
“Childproof lock”, Page 12.
Why are the illuminated dis- plays flashing and why is a signal sounding?| ◾ Clean the surface of the control panel of any liquids or food residue. Remove any objects that may cover the control panel. You can find further information about deactivating the signal tone under → “Basic se t tings”, Page 12.
The ventilation system does not switch on even though the automatic start is activ- ated.| ◾ Manually activate the ventilation system or check the configuration of the auto- matic start. You can find additional information about this in the section entitled → “Basic settings”, Page 12.
The ventilation system continues to run even though the cooking zones have been switched off.| ◾ Manually switch off the ventilation system.
You can find additional information about this setting in the section entitled → “Basic operation”, Page 9.
The air intake is too weak.| Ensure that the grease filter is clean. To find out how to clean and replace the filter, refer to the section entitled → “Cleaning and servicing”, Page 14.

18.2 Noises

Question

|

Answer

---|---
Why can I hear noises while I’m cooking?| Noises may be generated while using the hob depending on the base material of the cookware. These noises are normal for induction technology. They do not in- dicate that there is a fault.
Possible noises| ◾ A deep humming noise similar to a transformer: Occurs when cooking at a high power level. This noise disappears or becomes quieter when you reduce the power level.
A quiet whistling noise: This can be heard when the cookware is empty. This noise disappears when you add water or food to the cookware.
Crackling: This noise occurs when the cookware is made from different multilayer materials, or if you use cookware of different sizes and different materials. The loudness of the noise can vary depending on the quantity of food being cooked or the cooking method.
Loud whistling noises: These may arise if you are operating two cooking zones at the same time and at the maximum power level. These whistling noises disap- pear or become quieter when you reduce the power level.
Fan noises: The hob is equipped with a fan that switches on automatically at high temperatures. The fan may also continue to run after you have switched the hob off if the temperature measured is still too high.

18.3 Items of cookware

Question

|

Answer

---|---
Which cookware is suitable for the induction hob?| ◾You can find more information on which items of cookware are compatible with in- duction cooking in → “Suitable cookware”, Page 6.
Why is the cooking zone not heating up and why is the heat setting flashing?| ◾ The cookware is on a different cooking zone to the one that has been switched on.
Ensure that you have switched on the correct cooking zone for the cookware.
◾ The cookware is too small for the cooking zone that is switched on or it is not suitable for induction cooking. Ensure that the cookware is suitable for induction cooking and that it is placed on the cooking zone which best corresponds to its size. You can find more information about this under → “Suitable cookware”, on Page 6.
Why is it taking so long for the cookware to heat up or why is it not heating up sufficiently despite being on a high-power setting?| ◾ The cookware is too small for the cooking zone that is switched on or it is not suitable for induction cooking. Ensure that the cookware is suitable for induction cooking and that it is placed on the cooking zone which best corresponds to its size. You can find more information about this under → “Suitable cookware”, Page 6.

18.4 Cleaning

Question

|

Answer

---|---
How can I clean the hob?| ◾You can achieve the best results by using special glass-ceramic cleaning products. Do not use harsh or abrasive cleaning products, dishwater detergent (concentrated) or scouring pads. You can find more information about this under → “Cleaning and servicing”, on Page 14.
There is water in the cabinet underneath the hob.| ◾Check whether the overflow container is full. You can find further information about cleaning and caring for the hob under → “Cleaning and servicing”, Page 14.

Question

|

Answer

---|---
How often do I need to clean the overflow container?| ◾Clean the overflow container frequently.
You can find further information about how to clean the overflow container under → “Cleaning and servicing”, Page 14.
How often do I need to clean the grease filter?| ◾Regularly clean the grease filter. To find out how to clean and replace the filter, refer to the section entitled
→ “Cleaning and servicing”, Page 14.

Troubleshooting

You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service.This will avoid unnecessary costs. **WARNING**
‒ Risk of injury! Improper repairs are dangerous.

  • Repairs to the appliance should only be carried out by trained specialist staff.
  • If the appliance is defective, call Customer Service.

WARNING ‒ Risk of electric shock! Incorrect repairs are dangerous.

  • Repairs to the appliance should only be carried out by trained specialist staff.
  • Only use genuine spare parts when repairing the appliance.
  • If the power cord of this appliance is damaged, it must be replaced with a special connection cable, which is available from the manufacturer or his Customer Service.

19.1 Warnings
Notes

    • If appears in the displays, press and hold the sensor for the respective cooking zone and read the fault code.
  • If the fault code is not listed in the table, disconnect the hob from the power supply and wait 30 seconds before reconnecting it. If this display appears again, contact the technical after-sales service and specify the exact fault code.
  • If an error occurs, the appliance does not switch to standby mode
  • In order to protect the appliance’s electronic parts from overheating or surge currents, the hob may temporarily reduce the power level.

19.2 Information on the display panel

Fault Cause and troubleshooting
No displays light up. The power supply has been disconnected.

▶ Use other electrical appliances to check whether there has been a power failure.
The appliance has not been connected as shown in the circuit diagram.
▶ Connect the appliance in accordance with the circuit diagram.
Electronics fault
▶ If you are unable to rectify the fault, inform the technical after-sales service.
The displays flash.| The control panel is wet or an object is covering it.
▶ Dry the control panel or remove the object.
| The odour filter is saturated or the saturation indicator lights up even though the filter has been replaced.
▶ Change the filter and reset the filter saturation indicator. You can find additional information about this in the section entitled → “Cleaning and servicing”, Page 14.
| The electronics have overheated and one or all of the cooking zones have been switched
off.
▶ Wait until the electronics have cooled down sufficiently. Then touch any button on the control panel.
+ power level and audible signal| There is hot cookware in the vicinity of the control panel. This may cause the electronics to overheat.
▶ Remove the cookware. The fault display goes out shortly afterwards. You can continue to cook.
Fault| Cause and troubleshooting
---|---
and signal tone| There is hot cookware in the vicinity of the control panel. The cooking zone has been
switched off to protect the electronics.
▶ Remove the cookware. Wait a few seconds. Touch any button. When the fault display
goes out, you can continue cooking.
| The cooking zone has overheated and has been switched off to protect the work surface.
▶ Wait until the electronics have cooled down sufficiently before switching the cooking
zone back on.
| The cooking zone has been operating continuously for an extended period.
▶ Individual safety switch-off is switched on. Touch any button to switch off the display so that you can set the cooking zone again.
| The operating voltage is incorrect and outside of the normal operating range.
▶ Contact your energy supplier.
| The hob is not connected correctly.
▶ Disconnect the hob from the mains. Connect the hob in accordance with the circuit diagram.
| Demo mode is activated.
▶ Disconnect the hob from the mains. Wait for 30 seconds and connect the hob. Touch
any sensor in the next three minutes. Demo mode is deactivated.

19.3 Normal noises from your appliance
An induction hob may sometimes cause noises or vibrations, such as buzzing, crackling, hissing noises, fan noises or rhythmic noises.

Disposal

Find out here how to dispose of old appliances correctly.
20.1 Disposing of old appliance
Valuable raw materials can be reused by recycling.

  1. Unplug the appliance from the mains.
  2. Cut through the power cord.
  3. Dispose of the appliance in an environmentally friendly manner. Information about current disposal methods are available from your specialist dealer or local authority.

This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

Customer Service

If you have any queries on use, are unable to rectify faults on the appliance yourself or if your appliance needs to be repaired, contact Customer Service. Function-relevant genuine spare parts according to the corresponding Ecodesign Order can be obtained from Customer Service for a period of at least 10 years from the date on which your appliance was placed on the market within the European Economic Area.
Note: Under the terms of the manufacturer’s warranty the use of Customer Service is free of charge. Detailed information on the warranty period and terms of warranty in your country is available from our aftersales service, your retailer or on our website. If you contact Customer Service, you will require the product number (E-Nr.) and the production number (FD) of your appliance. The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website.
21.1 Product number (E-Nr.) and production number (FD)
You can find the product number (E-Nr.) and the production number (FD) on the appliance’s rating plate. The rating plate can be found:

  • On the appliance certificate.
  • On the underside of the hob, towards the front.

The product number (E no.) can also be found on the glass ceramic. You can also display the customer service index (KI) and the production number (FD) in the basic settings. → Page 12 BOSCH PIE811B15E Induction Hob with Integrated
Ventilation System - fig 20

Make a note of your appliance’s details and the Customer Service telephone number to find them again quickly.

Test dishes

These recommended settings are intended for test institutes to facilitate the testing of our appliances. The tests were carried out using our cookware sets for in- duction hobs. If required, these accessory sets can be purchased at a later point from specialist retailers, or through our technical after-sales service or our online shop.
22.1 Melting the chocolate coating
Ingredients: 150 g dark chocolate (55% cocoa). ¡ 16 cm saucepan without lid
– Boiling: Power level 1.
22.2 Heating and keeping lentil stew warm
Recipe in accordance with DIN 44550 Initial temperature 20 °C Heating up without stirring

  • 16 cm saucepan with lid, amount: 450 g
    – Heating up: Duration 1 min. 30 sec., power level 9
    – Simmering: Power level 1.

  • 20 cm saucepan with lid, amount: 800 g
    – Heating up: Duration 2 min. 30 sec., power level 9
    – Simmering: Power level 1.

22.3 Heating and keeping lentil stew warm
E.g.: Lentil diameter 5–7 mm. Initial temperature 20 °C Stir after heating for 1 minute

  • 16 cm saucepan with lid, amount: 500 g
    – Heating up: Duration approx. 1 min. 30 sec., power level 9
    – Simmering: Power level 1.

  • 20 cm saucepan with lid, amount: 1 kg
    – Heating up: Duration approx. 2 min. 30 sec., power level 9
    – Simmering: Power level 1.

22.4 Béchamel sauce
Milk temperature: 7 °C

  • 16 cm saucepan without lid, ingredients: 40 g butter, 40 g flour, 0.5 l milk with 3.5% fat content and a pinch of salt

Preparing Béchamel sauce

  1. Melt the butter, stir in the flour and salt, and heat up the mixture.
    ‒ Heating up: Duration 6 min., power level 2

  2. Add the milk to the roux and bring to the boil, stirring continuously.
    ‒ Heating up: Duration 6 min. 30 sec., power level 7

  3. Once the Béchamel sauce comes to the boil, leave it on the cooking zone for a further two minutes.
    ‒ Simmering: Power level 2

22.5 Cooking rice pudding with the lid on
Milk temperature: 7 °C

  1. Heat the milk until it starts to rise up. Heat up without a lid. Stir after heating for 10 min.
  2. Set the recommended power level and add rice, sugar and salt to the milk. The cooking time, including heating up, is approx. 45 minutes.
    • 16 cm saucepan, ingredients: 190 g short-grain rice, 90 g sugar, 750 ml milk with 3.5% fat content and 1 g salt
    – Heating up: Duration approx. 5 min. 30 sec., power level 8.
    – Simmering: Power level 3
    • 20 cm saucepan, ingredients: 250 g short-grain rice, 120 g sugar, 1 l milk with 3.5% fat content and 1.5 g salt
    – Heating up: Duration approx. 5 min. 30 sec., power level 8.
    – Simmering: Power level 3, stir after 10 minutes

22.6 Cooking rice pudding without a lid
Milk temperature: 7 °C

  1. Add the ingredients to the milk and heat the mixture up while stirring continuously.
  2. Once the milk has reached approx. 90 °C, select the recommended power level and leave it to simmer on a low heat for approx. 50 minutes.
    • 16 cm saucepan without lid, ingredients: 190 g short-grain rice, 90 g sugar, 750 ml milk with 3.5% fat content and 1 g salt
    – Heating up: Duration approx. 5 min. 30 sec., power level 8.
    – Simmering: Power level 3
    •20 cm saucepan without lid, ingredients: 250 g short-grain rice, 120 g sugar, 1 l milk with 3.5% fat content and 1.5 g salt
    – Heating up: Duration approx. 5 min. 30 sec., power level 8.
    – Simmering: Power level 2.

22.7 Cooking rice
Recipe in accordance with DIN 44550 Water temperature: 20 °C

  • 16 cm saucepan with lid, ingredients: 125 g long-grain rice, 300 g water and a pinch of salt
    – Heating up: Duration approx. 2 min. 30 sec., power level 9
    – Simmering: Power level 2

  • 20 cm saucepan with lid, ingredients: 250g long grain rice, 600 g water and a pinch of salt
    – Heating up: Duration approx. 2 min. 30 sec., power level 9
    – Simmering: Power level 2.

22.8 Roasting a pork loin
Initial temperature of the loin: 7 °C ¡ 24 cm pan without lid, ingredients: 3 pork loins, total weight approx. 300 g, 1 cm thick, and 15 g sunflower oil
– Heating up: Duration approx. 1 min. 30 sec., power level 9
– Simmering: Power level 7
22.9 Preparing crêpes
Recipe in accordance with DIN EN 60350-2

  • 24 cm pan without lid, ingredients: 55 ml batter per crêpe
    – Heating up: Duration 1 min. 30 sec., power level 9
    – Simmering: Power level 7

22.10 Deep-fat frying frozen chips

  • Pot dia. 20 cm without lid: ingredients: 2 l sunflower oil. For each frying time: 200 g frozen chips, 1 cm thick.
    – Heating up: Power level 9, until the oil temperature reaches 180 °C.
    – Simmering: Power level 9

Thank you for buying a
Bosch Home Appliance!
Register your new device on MyBosch now and profit directly from:
• Expert tips & tricks for your appliance
• Warranty extension options
• Discounts for accessories & spare parts
• Digital manual and all appliance data at hand
• Easy access to Bosch Home Appliances Service
Free and easy registration – also on mobile phones:
www.bosch-home.com/welcome
BOSCH PIE811B15E Induction Hob with Integrated Ventilation System - icon
1 Looking for help?
You’ll find it here.
Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts.
Find out everything about the many ways Bosch can support you:
www.bosch-home.com/service
Contact data of all countries are listed in the attached service directory.
BSH Hausgeräte GmbH
Carl-Wery-Straße 34
81739 München, GERMANY
www.bosch-home.com
A Bosch Company
Valid within Great Britain:
Imported to Great Britain by
BSH Home Appliances Ltd.
Grand Union House
Old Wolverton Road
Wolverton, Milton Keynes
MK12 5PT
United Kingdom

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals