Optoma GT2100HDR Projector User Manual
- June 13, 2024
- Optoma
Table of Contents
Optoma GT2100HDR Projector
Product Information
- Product Name: Unknown (not mentioned in the user manual extract)
- Manufacturer: Optoma
- Model Number: Unknown (not mentioned in the user manual extract)
- Website: www.optoma.com
Product Usage Instructions
- Power Switch: – Use the Power Switch to turn the product on or off.
- Freeze: – The Freeze button is used to freeze the current display on the screen.
- Focus Zoom: – Use the Focus Zoom feature to adjust the focus and zoom level of the projection.
- Page- Laser Page+: – These buttons are used for navigating through pages or laser pages.
- Keystone: – The Keystone feature is used to correct any distortion in the projected image caused by the angle of the projector.
- Volume -/+: – Use the Volume -/+ buttons to adjust the audio volume.
- Source: – The Source button is used to switch between different input sources.
- Resync: – The Resync button is used to synchronize the input signal with the projector.
- Geometric Correction: – Use the Geometric Correction feature to adjust the shape and alignment of the projected image.
- PIP/PBP: – PIP (Picture-in-Picture) and PBP (Picture-by-Picture) are features that allow you to display multiple sources on the screen simultaneously.
- Mode: – The Mode button is used to switch between different display modes.
- AV Mute: – The AV Mute button is used to temporarily mute the audio and video output
- Info. Source: – Press this button to view information about the current input source.
- D Zoom: – The D Zoom feature allows you to digitally zoom in on a specific area of the projected image.
- Menu: – Press the Menu button to access and navigate through the product’s menu settings.
- Format Freeze: – The Format Freeze feature allows you to freeze the current format and resolution of the projected image.
- Remote ID: – The Remote ID setting is used to pair the remote control with the product.
- Contrast and Brightness: – Use these settings to adjust the contrast and brightness levels of the projected image.
- Aspect Ratio: – The Aspect Ratio setting allows you to choose the desired aspect ratio for the projected image.
- Mute: – The Mute button is used to mute the audio output.
- Sleep Timer: – Use the Sleep Timer feature to set a specific time for the product to automatically turn off. Please note that the above usage instructions are general guidelines based on the information provided in the user manual extract.
For more detailed instructions specific to your model, please refer to the complete user manual available for download on the Optoma website: Optoma User Manual Download.
For access to the setup information, user manual, and product updates –please scan the QR Code or visit the following URL: https://www.optoma.com/support/download
Assembly Instructions
Note:
- The remote control may vary depending on the region and model. ※
- For warranty information, please visit our website: www.optoma.com
- For detailed instructions, please scan the QR code or visit the URL: https://www.optoma.com/support/download
Safety information
- Before operating the projector, it is essential to read the full safety information in the user manual.
- Do not look into the projector lens during operation. The bright light may harm your eyes.
- Do not block projector inlet or outlet air vents. Do not place the projector on an unstable surface as it may damage the projector or injure the personnel.
- Only use attachments/accessories specified by the manufacturer.
- Do not let objects or liquids enter the projector as it may cause the fire or electric shock.
- To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Make sure that the operating environment meets the requirements in the user manual.
- Do not install near heat sources such as radiators, heaters, stoves or any other apparatus such as amplifiers that emits heat.
- Please do not open or disassemble the projector as this may cause electric shock. The unit should only be repaired by authorized service personnel.
- Turn off the projector and unplug the power cord before you maintain, install the projector.
- Remove battery/batteries from remote control before storage. If the battery/batteries are left in the remote for long periods, they may leak.
- *Use a power strip and or surge protector. As power outages and brown-outs can KILL devices.
Note:
- Lens cap and CD UM are optional accessories depending on the region and model.
- For warranty information, please visit our website: www.optoma.com
- For detailed instructions, please scan the QR code or visit the URL: https://www.optoma.com/support/download
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>