Honeywell RCHC4400WF1004 C2 WiFi Security Camera Installation Guide
- June 13, 2024
- Honeywell
Table of Contents
Honeywell RCHC4400WF1004 C2 WiFi Security Camera
Product Information
The C2 Wi-Fi Security Camera is a wireless camera designed for home security purposes. It allows users to monitor their surroundings remotely using the Honeywell Home app on their mobile devices. The camera features a built-in LED indicator, a camera lens for capturing video footage, a power cord for connectivity, and a stand/wall mount for flexible placement options.
Key Specifications:
- Input: 5 V 2 A
- Model Numbers: RCHC4400WF1004, RCHC4400WF1013
Product Usage Instructions
Installation
-
Download the Honeywell Home app from the App Store or Google Play. Make sure you have your Wi-Fi password available before installation.
-
Enable Bluetooth on your mobile device.
-
Launch the Honeywell Home app and create an account or sign in to your existing account.
-
Tap on “ADD DEVICE” or the plus sign.
-
Select the C2 Wi-Fi Camera from the list and follow the instructions in the app to name the camera and specify its location.
Connect the Power Cord -
Plug the micro USB end of the power cord into the camera.
-
Plug the USB end of the power cord into the wall outlet adapter, and then connect the adapter to a power outlet.
-
Wait for the LED on the camera to blink blue (approximately 1 minute) and then tap “NEXT”.
-
If the LED turns solid red, unplug the camera and plug it back in.
Connect to Mobile Device
- Enable Bluetooth on your mobile device.
- The app will search for the camera.
- Hold the QR code displayed in the app approximately 3-6 inches (7-15 cm) from the camera lens to connect the camera to the app. The camera LED will turn purple and beep.
Connect to Wi-Fi
- Ensure that your mobile device is connected to the same Wi-Fi network you want to connect the camera to.
- Select your Wi-Fi network from the list and tap “NEXT”.
- If required, enter your Wi-Fi password and tap “DONE”. Note: The camera may beep during certain steps of this process.
Wi-Fi Connection LEDs
During Wi-Fi connection, the LED on the camera indicates the following:
- Blinking Green: Connecting to Wi-Fi network.
- Solid Green: Connected to Wi-Fi network.
- Solid Red (for 2 seconds): Connection failed. The LED will then turn solid purple.
- Blinking Blue: QR Code scan complete. Go to “Connect to Wi-Fi” on page 3. Camera has lost Bluetooth connection. Unplug the camera and plug it back in. See “Connect the power cord” on page 2 for instructions.
Options
Choose your Geofencing and Honeywell Home Membership options during setup. You can easily change these options later if you skip them initially.
Placement
- With Stand: Place the camera in a desired location for viewing and recording using the provided stand.
- On the Wall: You can also mount the camera directly to the wall without using the stand.
Operation
Honeywell Home App Experience: Launch the Honeywell Home app to access your Home screen. From there, you can view live video from your C2 Wi-Fi Camera and manage other connected devices.
Testing Smoke/CO Alarm Detection: To test the smoke or carbon monoxide alarm detection feature, press and hold the Test button on your smoke/CO detector for at least 5 seconds or 3 cycles of the detector’s alarm. The camera will send an alert if a smoke or CO alarm is detected. For a list of compatible alarms, refer to Resideo.com.
Camera Overview:
- LED Indicator
- Camera Lens
- Power Cord
- Stand/Wall Mount
Installation
Download the Honeywell Home app
Note : Have your Wi-Fi password available before installation.
-
Make sure bluetooth is enabled on your mobile device.
-
Search for Honeywell Home in the App Store or Google Play.
-
Download the Honeywell Home app.
Launch the Honeywell Home app
-
Launch the Honeywell Home app.
-
Create an account (if necessary), or sign in to your Honeywell Home account. Tap ADD DEVICE or the plus sign.
-
Select the C2 Wi-Fi Camera to install, then follow the instructions in the Honeywell Home app to name the camera and its location.
Connect the power cord
-
Plug the power cord’s micro USB end into the camera.
-
Plug the power cord’s USB end into the wall outlet adapter, and plug your camera into a power outlet.
-
Wait until the LED on the camera blinks blue (about 1 minute), then tap NEXT
Note : If the LED turns solid red, it means the connection mode timed out. Unplug the camera and plug it back in.
Connect
Connect to mobile device
- Enable bluetooth on your mobile device.
- The app will look for the camera.
- For one camera, it will connect automatically.
- For more than one camera, the app will prompt you to select one camera at a time. Each camera has a unique MAC ID printed on the back. Use that ID to select the camera you want to connect.
- A QR code will display in the app. To connect your camera to the app, hold the QR code approximately 3-6 inches (7-15 cm) from the camera lens.
- The camera LED turns purple and the camera beeps.
Connect to Wi-Fi
Be sure you are on the same Wi-Fi network you wish to connect your camera to.
- Choose your Wi-Fi network from the list. Tap NEXT.
- Enter your Wi-Fi password, if necessary. Tap DONE.
Note : The camera will beep during some steps in this process
Wi-Fi Connection LEDs
During Wi-Fi connection, the LED indicates the following.
Options
Choose your Geofencing and Honeywell Home Membership options (if you skip them you can change them easily later).
Placement
-
With Stand
Place the camera in a desired location for viewing and recording. -
On the Wall
You can also mount the camera directly to the wall without the stand.
Honeywell Home app experience
- When you launch the application, your Home screen is displayed.
- All of your devices (cameras, thermostats, water leak detectors, etc.) are displayed. Select a camera from the list to view live video from that camera.
Testing smoke/CO alarm detection
- If your smoke or carbon monoxide alarm goes off and your camera is on, it will send you an alert that a smoke or CO alarm has been detected.
- To test this feature, press and hold the Test button on your smoke/CO detector for at least 5 seconds or 3 cycles of the detector’s alarm. A shorter test might not trigger a sound event.
- For a list of compatible alarms see Resideo.com.
Camera Overview
Reset
If your Wi-Fi connection fails or you need to connect to a different Wi-Fi
network, insert one end of a paperclip into the reset hole. Press and hold it
for 10 seconds until you hear a chirp.
SD card
The camera comes with an encrypted 16GB SD card installed. It stores images if
the camera’s connection to the cloud is lost. You can replace it with any
compatible SD card.
Status LED
The camera has an LED that gives device status.
FCC Regulations
§ 15.19 (a)(3)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
§ 15.21
Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
§ 15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
For product available in the USA/Canada market, only channel 1–11 can be
operated. Selection of other channels is not possible.
This device is restricted to indoor use
FCC Radiation Exposure Statement:
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
- This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter
IC Regulations
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This device is restricted to indoor use.
IC Radiation Exposure Statement:
- This device complies with IC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with minimum distance of 20cm between the radiator and your body.
- This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter
Need help?
- Web : resideo.com
- Phone : 1-800-633-3991
The operation of this equipment is subject to the following two conditions:
(1) this equipment or device may not cause harmful interference, and (2) this
equipment or device must accept any interference, including interference that
may cause undesired operation
The product should not be disposed of with other household waste. Check for
the nearest authorized collection centers or authorized recyclers. The correct
disposal of end-of-life equipment will help prevent potential negative
consequences for the environment and human health.
Resideo Technologies, Inc.
1985 Douglas Drive North, Golden Valley, MN 55422
1-800-633-3991 33-00365EFS—09 M.S. Rev.
04-21 | Printed in United States
www.resideo.com
©2021 Resideo Technologies, Inc. All rights reserved.
The Honeywell Home trademark is used under license from Honeywell
International, Inc. This product is manufactured by Resideo Technologies, Inc.
and its affiliates.
Todos los derechos reservados. La marca comercial Honeywell Home se utiliza
bajo licencia de Honeywell International, Inc. Este producto es fabricado por
Resideo Technologies, Inc. y sus afiliados.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>