Honeywell HSF1640 Series Double Blade Whole Room Stand Fan User Manual

: June 13, 2024
: Honeywell

Table of Contents

Honeywell HSF1640 Series Double Blade Whole Room Stand Fan
Product Information
Product Usage Instructions
IMPORTANT SAFETY INSTRUCTIONS
USER SERVICING INSTRUCTIONS
PART GUIDE
BLADE AND GRILLES ASSEMBLY
OPERATION
FAN OPERATIONFAN OPERATION HSF1640 SERIES CONTROL PANEL OPERATION
HSF1640 SERIES REMOTE CONTROL OPERATION
USER SERVICING INSTRUCTIONS
1 YEAR LIMITED WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Honeywell HSF1640 Series Double Blade Whole Room Stand Fan

Product Information

This stand fan is designed for whole room cooling.
It is intended for household use only and not recommended for commercial, industrial, or outdoor use.
The fan features a polarized plug, with one blade wider than the other, to fit a polarized outlet.
It has overload protection (fuse) for safety.
The fan should not be operated in the presence of explosive and/or flammable fumes.
It should not be placed near an open flame, cooking, or other heating appliances.
The fan should be placed on a dry, level surface and should not be hung or mounted on a wall or ceiling.
Avoid contact with moving fan parts.
The use of attachments not recommended by the manufacturer may be hazardous.

Product Usage Instructions

Read and save the safety instructions provided in the user manual before using the fan.
Use the fan only as described in the manual. Any other use not recommended may cause fire, electric shock, or injury.
Do not place the fan in a window or immerse it in water or spray it with liquids to protect against electric shock.
Ensure that the fan is plugged into a polarized outlet correctly. If the plug does not fit fully, reverse it. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
Supervise the use of the fan when children are present.
Turn off the fan and unplug it from the outlet when not in use, when moving it to another location, and before cleaning.
To disconnect the fan, first turn it off, grip the plug, and pull it from the wall outlet. Never pull the plug by the cord.
Do not operate the fan in the presence of explosive and/or flammable fumes.
Keep the fan and its parts away from open flames, cooking appliances, or other heating appliances.
Do not operate the fan if the cord or plug is damaged, or if the product malfunctions, is dropped, or damaged in any manner. Refer to the warranty for further instructions.
Do not use an extension cord or power strip with this fan.
Avoid contact with moving fan parts.
Only use attachments recommended by the manufacturer to avoid hazards.
Place the fan on a dry, level surface.
Do not hang or mount the fan on a wall or ceiling.
Do not operate the fan if the housing is damaged.
If there is a loose fit between the AC outlet and plug, it may cause overheating and distortion of the plug. Contact a qualified electrician to replace loose or worn outlets.
Do not operate any fan with a damaged cord or plug. Discard any damaged fan, return it to the retailer where it was purchased, or request a return authorization for examination and/or repair from Kaz, Inc.
Avoid running the fan cord under carpeting, covering it with throw rugs, runners, or similar coverings, or routing it under furniture or appliances. Arrange the cord away from traffic areas to prevent tripping.

WARNING: To Reduce The Risk of Fire or Electric Shock, follow these instructions carefully.

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USING THIS FAN
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
FOR US MODELS ONLY – This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit may be present and the product should be discarded or returned to an authorized service facility for examination and/or repair.

Use this fan only as described in this manual. Other use not recommended as it may cause fire, electric shock or injury to persons.
This product is intended for household use ONLY and not for commercial, industrial or outdoor use.
To protect against electric shock, do not place fan in window, immerse unit, plug or cord in water or spray with liquids.
This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of shock, this plug is intended to fit only one way in a polarized outlet. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature.
Close supervision is necessary when any appliance is used by or near children.
Turn the fan OFF and unplug the fan from the outlet when not in use, when moving the fan from one location to another and before cleaning.
To disconnect the fan, first turn the unit OFF, grip the plug and pull it from the wall outlet. Never pull the plug by the cord.
DO NOT operate the fan in the presence of explosive and/or flammable fumes.
DO NOT place the fan or any parts near an open flame, cooking or other heating appliance.
DO NOT operate the fan with a damaged cord or plug or if the product malfunctions, is dropped or damaged in any manner (see warranty).
DO NOT use an extension cord or power strip with this fan.
Avoid contact with moving fan parts.
The use of attachments not recommended by the manufacturer may be hazardous.
Place the fan on a dry level surface.
DO NOT hang or mount fan on a wall or ceiling.
DO NOT operate if the fan housing is damaged.
A loose fit between the AC outlet (receptacle) and plug may cause overheating and a distortion of the plug. Contact a qualified electrician to replace loose or worn outlet.
DO NOT operate any fan with a damaged cord or plug. Discard any damaged fan, return the fan to the retailer where the
fan was purchased, or request a return authorization to return to Kaz, Inc. for examination and/or repair.
DO NOT run fan cord under carpeting. DO NOT cover cord with throw rugs, runners, or similar coverings. DO NOT route cord under furniture or appliances. Arrange cord away from traffic areas and where it will not be tripped over.

WARNING: To Reduce The Risk of Fire or Electric Shock, Do Not Use This Fan With Any Solid State Speed Conrol Device.
FUSED SAFETY PLUG – FOR US MODELS ONLY
This fan features a fused safety plug which is designed to cut off electric current to the fan if an electrical fault occurs. Please see below for more information on how to properly use your fan and replace the safety plug fuse, if needed.

USER SERVICING INSTRUCTIONS

If your fan loses power and you suspect that the fuse on your fan has blown, grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.

Slide fuse cover, located on the top of the plug towards the prongs of the plug.
Carefully remove the blown fuse and snap a new fuse into place. To Reduce the Risk of Fire, replace fuse only with 2.5 Amp, 125 volt fuse. Fully close the fuse door by sliding back into place. Discard the blown fuse. The plug should now be ready for normal use.
To Reduce the Risk of Fire, do not replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged.
If you need further information on how or when to replace the fuse in the safety plug, please contact Kaz Consumer Relations Department by visiting our website at www.honeywellpluggedin.com/fans or calling 1-800-477-0457.

BASE ASSEMBLY

Align the pole in the base using tabs as a guide.
Gently place base on its side.
Insert and tighten the L shaped bolt and washer on the bottom of the fan base.
Tighten by turning clockwise.

PART GUIDE

Front Grille
Locking Clips
Blade Nut
Small Blade
Large Blade
Plastic Nut
Rear Grille
Fan Head Assembly
Control Panel
Washer
“L” Screw
Motor Shaft
Alignment Prongs
Locking Screw
Extension Pole
Pole Locking Nut
Lower Pole
Base
Remote Control

BLADE AND GRILLES ASSEMBLY

The small blade is packaged separately in between cardboard apart from the large blade DO NOT THROW OUT!

Unscrew the blade nut clockwise and the plastic nut counterclockwise and set aside.
Position the rear grille onto the fan head assembly making sure the two alignment holes are aligned with the two prongs.
Screw on plastic nut tightly clockwise to attach rear grille.
Install the blade onto the shaft until the retaining pin fits into the notch on the blade. Now place the small blade on to the shaft making sure the alignment pin is inserted into one of the three holes on the large blade.
Screw blade nut to the motor shaft counterclockwise (tighten by turning to the left).
Mount the front grille and secure using the locking clips.

OPERATION

Tilt Control
The airflow can be adjusted upward or downward by tilting the fan head as desired. To change the tilting angle of the fan head assembly, simply move the fan head to the desired angle.

Height Adjustment
Turn the pole locking nut counterclockwise to loosen the pole. Adjust the pole to the desired height and firmly tighten the locking nut in a clockwise direction.

FAN OPERATIONFAN OPERATION HSF1640 SERIES CONTROL PANEL OPERATION

On/Off
To turn fan on, press the Power button ( ) located at the top of the control panel.

Speed Control
To adjust the speed up or down, press the Fan Speed button( ) repeatedly to increase level of air speed.
1 (Low) 2 (Med.) 3 (High) and Off

Timer
Choose from 1, 2, 4, or 8 hour settings by performing the following function (Fig. 10):

1 hour: Press the Timer button ( ) ) once.
2 hours: Press the Timer button twice.
4 hours: Press the Timer button a third time.
8 hours: Press the Timer button a fourth time.

Press the Timer button a fifth time to turn the Timer feature off.

Oscillation
Press the Oscillation ( ) button to select or stop the oscillation.
IMPORTANT NOTE: DO NOT try to manually change the fan head direction; otherwise the fan will be damaged.

Mode
Press this key, to select from three featured air flow modes as desired.

Variable: quiet, ideal for night time with a soothing intermittent hi/lo
Breezy: natural air flow intermittent hi/lo
Constant: normal steady air flow

If no mode is selected a normal steady air flow will be on.

HSF1640 SERIES REMOTE CONTROL OPERATION

Remote Control Battery Installation Replacement Instructions

Remove battery door by sliding downward in direction of arrow.
Insert 2 AAA batteries into the remote following the directional guides in the recessed slots. Batteries are not included.
Replace battery door by sliding upward opposite of arrow direction until door snaps in place.

NOTE: DO NOT MIX OLD AND NEW BATTERIES.
DO NOT MIX ALKALINE, STANDARD (CARBON-ZINC) OR RECHARGEABLE (NICKEL-CADMIUM) BATTERIES. SEE RECYCLERS IN YOUR AREA FOR PROPER DISPOSAL OF BATTERIES.

Remote Button Function
Fan Speed Selection, Timer, Oscillation, and Mode Select operate as described in Control Panel Operation section.

USER SERVICING INSTRUCTIONS

Cleaning and Storage

Be sure your fan is in the OFF position.
Unplug the fan before cleaning.
Use only a soft, damp cloth to gently wipe the fan clean.
DO NOT immerse the fan in water and never allow water to enter the Motor Housing.
DO NOT use gasoline, paint thinner or other chemicals to clean the fan.

Removal of the Front Grille for Cleaning

Remove the Front Grille by releasing the Grille clips.
Unscrew the Blade Knob by turning it CLOCKWISE (REVERSE THREAD).
Pull the Fan Blade away from the Motor Housing.
Gently wipe the Fan Blade and Grilles with a soft, damp cloth.
Assemble the fan by following the last three steps in the ASSEMBLY INSTRUCTIONS.

Storage

For storage disassemble and clean the fan carefully as instructed. Store the fan in its original box. You may also leave the fan fully assembled and covered with plastic to protect it from dust. Store your fan in clean, dry place.

CONSUMER RELATIONS
Questions or Comments
Call us toll-free at: 1-800-477-0457
E-mail: consumerrelations@kaz.com
Or visit our website at: www.HoneywellPluggedIn.com/fans
Please be sure to specify model number.

1 YEAR LIMITED WARRANTY

You should first read all instructions before attempting to use this product.

This 1 year limited warranty applies to repair or replacement of product found to be defective in material or workmanship. This warranty does not apply to damage resulting from commercial, abusive, unreasonable use or supplemental damage. Defects that are the result of normal wear and tear will not be considered manufacturing defects under this warranty. KAZ IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights which vary from jurisdiction to jurisdiction. This warranty applies only to the original purchaser of this product from the original date of purchase.
At its option, Kaz will repair or replace this product if it is found to be defective in material or workmanship.
This warranty does not cover damage resulting from any unauthorized attempts to repair or from any use not in accordance with the instruction manual.

Call us toll-free: 1-800-477-0457 or e-mail: consumerrelations@kaz.com
Please be sure to specify a model number located on the box and the back and bottom of your unit. To register your product, please go to www.honeywellpluggedin.com/register to register your product under the Customer Care Center and receive product information updates and new promotional offers.
NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CONSUMER RELATIONS FIRST OR SEE YOUR WARRANTY. DO NOT RETURN THE PRODUCT TO THE ORIGINAL PLACE OF PURCHASE. DO NOT ATTEMPT TO OPEN THE MOTOR HOUSING YOURSELF, DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE TO THE PRODUCT OR PERSONAL INJURY.
Honeywell is a trademark of Honeywell International Inc., used under license by Helen of Troy Limited. Honeywell International Inc. makes no representation or warranties with respect to this product.
© 2018 All rights reserved.
Kaz USA, Inc., a Helen of Troy Company
Marlborough, MA 01752
Imported and Distributed by: Kaz Canada Inc., a Helen of Troy Company
6700 Century Avenue, Suite 210, Mississauga, Ontario L5N 6A4
Contact us at 1-800-477-0457 or www.honeywellpluggedin.com/fans
For Responsible recycling, please visit: www.RecycleNation.com