HEYGEARS Cure Personal Desktop Post Curing Unit User Manual
- June 13, 2024
- HEYGEARS
Table of Contents
HEYGEARS Cure Personal Desktop Post Curing Unit
Product Information
The product is a Personal Desktop Post Curing Unit manufactured
by HeyGears. It is designed for post-curing 3D printed models. The
unit has the following specifications:
- Name: UltraCraft Post Curing Unit
- Model: UltraCraft Cure
- Size: 370387456 mm
- Input Power: 100-240 V~ 50/60 Hz
- Weight: 12 kg
- Power: 350 W
Product Usage Instructions
-
1. **Unpacking and Installation**Please contact HeyGears support staff for assistance regarding unpacking and installing the machine. Ensure that the curing unit is positioned on a stable table, near a 100-240 V power socket, and protected from direct sunlight.
-
Baking Parameter Setting
-
Turn the knob to select “Bake” and press the knob to enter the baking parameter setting page.
-
Rotate the knob to set the desired baking time and temperature.
-
After setting, press the knob to start the baking process.
-
Taking out the Models
-
Open the cabinet door.
-
Take out the cured models.
-
Close the door.
-
Caution:
- Do not open the door during curing.
- Avoid touching or blocking the air outlet, and be careful of burns when removing the finished cured parts.
- For underwater curing, prepare a glass container with high-light transmission to improve the surface quality and prevent water spillage inside the device.
- Do not look directly at the device if there is still residual light after opening the door. It is recommended to wear goggles for operation.
For further assistance or inquiries, you can contact HeyGears through the following channels:
- Website: www.heygears.com
- Email: [email protected]
- China Phone: +86 020-22042035
- Global Phone: +1 318-353-4295
- Address: 11B25-6 U.S.17931 Sky Park Circle, Suite E, Irvine, CA, 92614
Please keep this operation manual properly for future reference. The pictures
are for reference only and the products are subject to the actual product.
This quick start must be read and understood before operating the
machine.
Thank you for choosing HeyGears. For safety, please contact HeyGears support
staff for assistance regarding unpacking and installing the machine. If you
fail to comply with the instructions in this manual, HeyGears will not be
liable for the consequential damages unless required by federal and local
ordinances. Please keep this operation manual properly for future reference.
The pictures are for reference only and the products are subject to the actual
product.
Items & Parameters
- Name UltraCraft Post Curing Unit
- Model UltraCraft Cure
- Size 370387456 mm
- Input 100-240 V~ 50/60 Hz
- Weight 12 kg
- Power 350 W
Components
Installation Requirements
Operation Steps
Curing Mode
- STEP 1: Take out the curing unit and place it on an even and horizontal surface. Take out the power cord sopplied in the package, and connect the unit to the power supply as shown in picture. Turn on the power switch, then the screen lights up to indicate that the power is successfully connected.
- STEP 2: Open the cabinet door and place the clean models (R remove supports as required) on the t urntable, and then close t he door.
- STEP 3: Rotate the knob and select “Curing” by pressing the knob down to enter jobs list. Rotate the knob to select curing job and press to select curing mode (Quick/High Performance) according to your needs, then rotate the knob t o the start button and press down. If you want to customize the curing time and temperature, turn the knob to the “Customize” menu at the end o f the task list.
- STEP 4: Open the cabinet door when finished and take out the models.
Baking Mode
- STEP 1: If baking function is needed, open the door and hang the items in the hole of the rod with hooks, or place them on the turntables, and then closde t he door to start baking.
- STEP 2: Turn the knob to select “Bake” and press the knob to enter the baking parameter setting page, then you can set the baking time and temperature. After setting, you can press to start.
- STEP 3: Take out the models when finished.
Caution
- Do not open the door during curing.
- The temperature of curing/baking process may be high, please do not touch or block the air outlet, and be careful of burns when removing the finished cured/baked parts.
- Fast curing mode can be selected according to the needs of direct curing, or the parts can be cured in water. For underwater curing, you should prepare your own glass container with high-light transmission, which will improve the surface quality of the cured parts. It is also necessary to avoid damage to the device due to water spillage inside the device.
- Do not look directly at the device if there is still residual light when opening the door and removing the parts. It is recommended to wear goggles for operation.
FCC Compliance
Information Statement
Caution: The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential i nstallation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated wi
th a minimum distance of 20cm between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
CONTACT
- www.heygears.com.
- [email protected].
- +86 020-22042035
- (China) / +1 318-353-4295 (Global)
- U.S： 17931 Sky Park Circle, Suite E, Irvine, CA, 92614