lubemate L-AWP1030 Air or Water Retractable Hose Reels Instruction Manual
- June 13, 2024
- Lubemate
Table of Contents
l-awp1030-l-awp1220_inst_issue1
INSTRUCTION MANUAL
AIR / WATER RETRACTABLE HOSE REELS
Model L-AWP1030 – L-AWP1220
DESCRIPTION
Thank you for purchasing a Lubemate hose reel. Each reel is a quality UV Stabilised reel, supplied complete with a delivery hose, feeder hose and mounting bracket.
FEATURES AND BENIFITS
- The hose reel is UV stabilised.
- The reel is easy to use positive latch and a built in hose layering mechanism to prevent hose bunching.
- Durable construction, made from high quality impact resistant polypropylene, light in weight and more compact.
- A powerful spring winds the hose back into the drum.
CAUTION
GENERAL SAFETY
Please read these operating instructions carefully and note the information given. Use these operating instructions to familiarize yourself with the product, the proper use and the safety instructions.
- To prevent injury or damage do not let go of the hose during rewinding.
- Hold the hose stop ball when retracting hose.
- Do not disassemble hose reel.
- Ensure the reel or hose is not in contact with any sharp objects or exposed to high temperatures.
- Do not drop this reel or damage will occur.
- Do Not use this product with any chemicals or liquid other than air/water.
- Turn off air supply after use or at the end of the day.
Installation:
- Take out the unit and accessories from the box ，
- Choose a suitable place near source of air/water.
- Take the mounting bracket as a template to mark the position for screws and drill four holes on the wall ( Fig.2)
1| Hose reel| 1
---|---|---
2| Mounting bracket| 1
3| Self-tapping bolts| 4 - Fix the bracket by four self-taping screws accordingly, (Fig.1)
- Connect the reel to the mounting bracket.
Note:
- The reel should be installed horizontally to a wall or post.
- It is recommended to mount the reel approximately 1 meter above the ground.
Operation
- Connect feeder hose and turn on supply
- Pull out hose to desired length and stop.
Retract hose
1. Always hold hose when retracting back into reel
2. Turn off the air/water supply.
Storage
Cleaning
This Reel is maintenance-free and must not be cleaned internally with water.
Maintenance
When not in use, turn off supply, and release the line pressure The reel must
not be used to transmit any chemical and substance When not in use for an
extended period of time it is recommended to be stored in a cool dry place.
| Item | Description | Materia | No off |
|---|---|---|---|
| 22 | Lock System | PA | 1 |
| 21 | Mounting Bracket | PP+GF30 | 1 |
| 20 | Handle | PP | 1 |
| 19 | Block Piece | POM | 1 |
| 18 | Aluminium Shaft | Aluminium | 1 |
| 17 | O‐Ring | NBR | 1 |
| 16 | Inlet | Brass | 1 |
| 15 | Right Cover | PP | 1 |
| 14 | Right Casing | PP | 1 |
| 13 | Synchronous belt | PU | 1 |
| 12 | Spring Shaft | 45# | 1 |
| 11 | Spring Cover | PP+GF30 | 1 |
| 10 | Spring | 62SI2MN | 1 |
| 9 | Slow return mechanism | PP+POM | 1 |
| 8 | Drum | PP+GF30 | 1 |
| 7 | Hose guide system | PA+POM | 1 |
| 6 | Output hose | Hybrid | 1 |
| 5 | Hose Stop | PP | 1 |
| 4 | Lead hose | Hybrid | 1 |
| 3 | Tooth Wheel | POM | 1 |
| 2 | Left Casing | PP | 1 |
| 1 | Left Cover | PP | 1 |
EXPLODED DIAGRAM
Note: no spare parts available
TROUBLESHOOTING
| FAULT | DESCRIPTION | SOLUTION |
|---|---|---|
| The hose does not retract | Hose has been pulled out too far and locked | Access |
the drum through the window and carefully rotate the drum half a turn in the
direction of the hose being pulled out to release latch.
| Not enough spring tension| Add 1-2 turns extra turns:
1.Remove the small cover,
2.Use spanner to clamp the groove of preload wheel,
3.Unscrew four bolts on the wheel, then rotate it for 1-2 turns in
counterclockwise, then fasten the bolts, and replace the cover.Fig.4
| SPECIFICATIONS | L-AWP1030 | L-AWP1220 |
|---|---|---|
| Maximum Pressure | 300psi/20bar | 300psi/20bar |
| --- | --- | --- |
| Maximum Temperature | + 55 deg C | + 60 deg C |
| Hose type | Hybrid Polymer | Hybrid Polymer |
| Hose Size and Length | 3/8″ (10mm) x 30m | 1/2″ (12.5mm) x 20m |
| Inlet / Outlet | 1/4″ BSPT (M) | 3/8″ BSP (M) |
| Dimensions | 51 x 24.5 x 46.8cm | 51 x 24.5 x 46.8cm |
| Weight | 11kgs | llkgs |
lubemate by macnaught / instruction manual
For warranty terms and condi
ons refer to www.macnaught.com.au
macnaught.com