RAZER Ifrit USB Audio Enhancer User Guide

June 13, 2024
Razer

RAZER-logo

RAZER Ifrit USB Audio Enhancer

RAZER-Ifrit-USB-Audio-Enhancer-fig-1

The Razer lfrit is a lightweight and discreet in-ear headset and broadcaster- grade mic for low-profile streaming that’s compatible with PC, mobile phone or console. Coupled with the Razer USB Audio Enhancer, the pair delivers improved recording and audio quality with a flat frequency response rate. The enhancer also allows up to two devices to be plugged in at the same time for easy co- streaming or shout casting.

PACKAGE CONTENTS/ SYSTEM REQUIREMENTS

PACKAGE CONTENTS

  • Razer lfrit streaming headset
  • Razer USB Audio Enhancer
  • 3 interchangeable ear-tips in varying sizes
  • Mic foam cover
  • Important Product Information Guide
PRODUCT REQUIREMENTS

Razer lfrit

  • Audio Usage
    Devices with 3.5 mm audio jack

  • Audio/ mic splitter extension cable usage
    Devices with separate 3.5 mm audio and microphone jacks

  • Audio+ microphone usage
    Devices with 3.5 mm audio + mic combined jack

Razer USB Audio Enhancer

  • PC or Mac with a free USB port
  • Windows® 7 64-bit / OS X® 10.8 (or higher)
  • Internet connection
    *Compatible with Stream/abs OBS, OBS, and XSplit (software license fee may apply)

REGISTRATION/ TECHNICAL SUPPORT

REGISTRATION

  • Register your product online at razerid.razer.com/warranty using your Razer ID to get real-time information on your product’s warranty status.
  • If you haven’t registered for a Razer ID yet, register now at razerid.razer.com to get a wide range of Razer benefits.

RAZER-Ifrit-USB-Audio-Enhancer-fig-2

TECHNICAL SUPPORT
What you’ll get:

  • 1 year limited manufacturer’s warranty.
  • Free online technical support at support.razer.com

TECHNICAL SPECIFICATIONS

RAZER IFRIT
  • Earphones
    • Impedance: 32 ± 15%
    • Type: Dynamic speaker
    • Diameter: 010 mm
    • Nominal/Max Input Power: 10 mW/ 20 mW
    • SPL: 102 ± 3 dB
    • Frequency Response: F0 – 20KHz
  • Microphone
    • Type: 09.7 mm, ECM unidirectional
    • Polar Pattern: Cardioid
    • Frequency Response: 100 – 10KHz
    • Sensitivity: -41 ± 3d B

RAZER USB SOUND ENHANCER
Microphone

  • Sample Rate: 44.1KHz/48KHz selectable via PC setting
  • Bit Rate: 16bit
  • Frequency Response: 20 – 20kHz

DEVICE LAYOUT

RAZER-Ifrit-USB-Audio-Enhancer-fig-3

  • A. Adjustable microphone with mic foam cover
  • B. Earpiece with removable bi-flange ear-tips
  • C. Magnetic clip-on bezel
  • D. Ergonomic earhook neckband
  • E. 3.5 mm audio + mic jack
  • F. Status indicator
  • G. Mic mute button
  • H. Audio control / Audio mute button
  • I. Audio + mic headset ports
  • J. 3 interchangeable ear-tips in varying sizes

SETTING UP YOUR RAZER IFRIT + RAZER USB AUDIO ENHANCER

SETTING UP YOUR RAZER IFRIT WITH YOUR RAZER USB AUDIO ENHANCER

  1. Connect your Razer USB Audio Enhancer to the USB port of your computer. The status indicator will light up in green, indicating that the device is connected and microphone input is enabled.

RAZER-Ifrit-USB-Audio-Enhancer-fig-4

  1. Connect the Razer lfrit to any of the available audio+ mic headset ports of your Razer USB Audio Enhancer.

RAZER-Ifrit-USB-Audio-Enhancer-fig-5

  1. You may peel off the protective cover of the Razer USB Audio Enhancer’s adhesive base to securely attach the device to any clean, dry, and flat surface.

  2. Set the Razer USB Audio Enhancer as the default playback and recording device of your computer. This is required if you are using the Razer USB Audio Enhancer for the first time.

For Windows users

  • Step 1: Open your Sound settings from Control Panel > Hardware and Sound > Manage audio devices. You can also right-click on the sound icon in the system tray, and then select Playback devices.

  • Step 2: In the Playback tab, select Razer USB Audio Enhancer from the list and click the Set Default button.

RAZER-Ifrit-USB-Audio-Enhancer-fig-8

  • Step 3: In the Recording tab, select Razer USB Audio Enhancer from the list and click the Set Default button.

RAZER-Ifrit-USB-Audio-Enhancer-fig-9

For Mac users

  • Step 1: Open your Sound settings from System Preferences> Sound.

RAZER-Ifrit-USB-Audio-Enhancer-fig-10

  • Step 2: In the Input tab, select Razer USB Audio Enhancer from the list.

RAZER-Ifrit-USB-Audio-Enhancer-fig-11

  • Step 3 : In the Output tab, select Razer USB Audio Enhancer from the list.

RAZER-Ifrit-USB-Audio-Enhancer-fig-12
Congratulations, you are now ready to use your Razer lfrit + Razer USB Audio Enhancer.

SETTING UP YOUR RAZER IFRIT WITH OTHER DEVICES
The Razer lfrit works well with various Razer devices such as the Razer Phone, Razer Raiju, Razer Wolverine, as well as other mobile devices or current generation game console controllers with 3.5 mm combined jack connectivity.
Sold separately at razer.com

CONNECTING THE HEADSET TO A RAZER PHONE

  1. Connect the USB-C Audio Adapter to your Razer Phone.
  2. Plug in your Razer lfrit to the USB-C Audio Adapter’s port.
  3. You may now start using your Razer lfrit with your Razer Phone.

RAZER-Ifrit-USB-Audio-Enhancer-fig-13

*CONNECTING THE HEADSET TO A RAZER RAIJU OR RAZER WOLVERINE**
Simply plug in the Razer lfrit to the headset port of your Razer controller to start using the headset with your Razer controller.

RAZER-Ifrit-USB-Audio-Enhancer-fig-14

USING YOUR RAZER IFRIT + RAZER USB AUDIO ENHANCER

WEARING AND REMOVING YOUR RAZER IFRIT
Stretch the neckband gently apart before placing the neckband’s earhooks over your ears. You may then bend the headset’s microphone until it is in front of your mouth.

RAZER-Ifrit-USB-Audio-Enhancer-fig-15

ACHIEVING A PROPER SEAL
To enjoy the bass of the Razer lfrit as it is intended, please ensure that the ear-tips are properly fitted into your ears and that a proper seal is achieved to block out ambient noise.
CAUTION: Do not yank out the earpiece from your ears as the sudden release of air pressure might cause potential discomfort.

REMOVING THE EAR-TIPS

  1. Firmly hold the earpiece.
  2. Grip the opening of the ear-tip firmly with the other hand.
  3. Pull the ear-tip downwards gently until it is released from the tip of the earpiece.

REPLACING THE EAR-TIPS

  1. Firmly hold the earpiece.
  2. Push the mouth of the eartip onto the tip of the earpiece.
  3. As you apply pressure, use a gentle twisting motion until the ear-tip is secured and in place.

MUTING CONNECTED HEADSETS
Press the USB Audio Enhancer’s mic mute button to mute or unmute microphone input. The status indicator of the USB Audio Enhancer will light up in red when microphone input is muted.

USING THE AUDIO CONTROL/ AUDIO MUTE BUTTON

  • Rotate the audio control to increase or decrease the audio output.

  • Press the audio mute button to mute or unmute the audio output.

SAFETY AND MAINTENANCE

SAFETY GUIDELINES
In order to achieve maximum safety while using the Razer lfrit + Razer USB Audio Enhancer, we suggest that you adopt the following guidelines:

  • Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the Razer hotline or go to support.razer.com for support. Do not attempt to service or fix the device yourself at any time.
  • Do not take apart the device {doing so will void your warranty) and do not attempt to operate it under abnormal current loads.
  • Keep the device away from liquid, humidity or moisture. Operate the device and its components only within the specific temperature range of 0°C {32 ° F) to 40°C {104 ° F). Should the temperature exceed this range, unplug and switch off the device in order to let the temperature stabilize to an optimal level.
  • Listening to excessively loud volumes over extended periods of time can damage your hearing.
  • Furthermore, legislation of certain countries permits a maximum sound level of 86dB to affect your hearing for 8 hours a day. We therefore recommend that you reduce the volume to a comfortable level when listening for prolonged periods of time. Please, take good care of your hearing.

MAINTENANCE AND USE
The Razer lfrit and Razer USB Audio Enhancer requires minimum maintenance to keep these devices in optimum condition. Once a month we recommend you clean these devices using a soft cloth to prevent dirt buildup. Do not use soap or harsh cleaning agents.

LEGALESE

COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION

  • ©2018 Razer Inc. All rights reserved. Razer, the triple-headed snake logo, Razer logo, “For Gamers.
  • By Gamers.”, and “Powered by Razer Chroma” logo are trademarks or registered trademarks of Razer Inc. and/or affiliated companies in the United States or other countries.
  • Windows is a trademark or a registered trademark of the Microsoft group of companies. OS X and Mac are trademarks or registered trademarks of Apple.
  • XSplit and XSplit Broadcaster is a registered trademark of Splitmedialabs Limited.
  • All other trademarks and trade names are the property of their respective owners and other company and product names mentioned herein may be trademarks of their respective companies. Razer Inc. (“Razer”} may have copyright, trademarks, trade secrets, patents, patent applications, or other intellectual property rights (whether registered or unregistered} concerning the product in this guide. Furnishing of this guide does not give you a license to any such copyright, trademark, patent or other intellectual property right. The Razer lfrit (the “Product”} may differ from pictures whether on packaging or otherwise. Razer assumes no responsibility for such differences or for any errors that may appear. Information contained herein is subject to change without notice.

LIMITED PRODUCT WARRANTY
For the latest and current terms of the Limited Product Warranty, please visit razer.com/warranty.

LIMITATION OF LIABILITY
Razer shall in no event be liable for any lost profits, loss of information or data, special, incidental, indirect, punitive or consequential or incidental damages, arising in any way out of distribution of, sale of, resale of, use of, or inability to use the Product. In no event shall Razer’s liability exceed the retail purchase price of the Product.

GENERAL
These terms shall be governed by and construed under the laws of the jurisdiction in which the Product was purchased. If any term herein is held to be invalid or unenforceable, then such term (in so far as it is invalid or unenforceable} shall be given no effect and deemed to be excluded without invalidating any of the remaining terms. Razer reserves the right to amend any term at any time without notice.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals