nVent HOFFMAN ECM19TD2U Tie-Down Bracket Instructions
- June 12, 2024
- nVent HOFFMAN
Table of Contents
nVent HOFFMAN ECM19TD2U Tie-Down Bracket
Product Information
- Product Name: Tie-Down Bracket
- Model Number: P/N 87791229
- Revision: B
- Part Numbers: 87791229, 87791492
Product Usage Instructions
- Identify the Tie-Down Bracket in your product package. It should be labeled as “1”.
- Check if you have the following screws:
- 12-24x.625 screws (typically used for open frame rack mounting)
- 10-32x.625 screws (typically used for cabinet mounting)
Note: Select the appropriate screws based on your rack or cabinet mounting requirements. Only one type of screw may be supplied.
- You should have four 10-32x.625 screws, labeled as “3”. These are used for mounting the Tie-Down Bracket.
- You should have four additional screws, labeled as “4”. Theseare not specifically mentioned in the instructions, but they might be required for certain installations.
Overview
Installation
Note: Select screws to match rack angle thread pattern, typically 12−24 screws for open frame rack mounting or 10−32 screws for cabinet mounting. Only one type of screw may be supplied.
Contact
- © 2018 Hoffman Enclosures Inc.
- PH 763 422 2211
- nVent.com/HOFFMAN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>