crest BONVOYAGE HPK14068 Wireless Headphones User Manual

crest BONVOYAGE HPK14068 Wireless Headphones

Product Information

1 x USB Charging cable
1 x 3.5mm Audio cable
1 x Carry case with carabiner

Specifications

Bluetooth Pairing|

1. Press and hold the power button (2) to put headphones into
   pairing mode. The LED Indicator (4) will alternate between red and
   blue lights.

2. Once your device is paired with your headphones, the LED
   Indicator (4) will display blue light only.

3. If you want to pair a new device to the headphone, press and
   hold the power button (2) until the LED Indicator (4) alternates
   between blue and red lights. Note this will take longer than the
   first-time pairing. Approximately 5 seconds.

---|---

How to Use

hold to
decrease volume.
Play/pause| Tap the power button (2) to play or pause audio.
To charge the headphones| Plug the supplied USB-C Charging cable into the USB-C Charge
port (7). It will take approximately 2.5 hours to fully charge.
Only charge your device with a 5V/1A adaptor. Using other adaptors
may either damage the battery or not charge.
For wired connection| Use the supplied 3.5mm Audio cable and plug into 3.5mm Audio
port (6).

Customer Support

For any further assistance, please contact our customer support:
Phone: 1800 812 261
Website: www.crest.com.au
AUSTRALIAN OWNED
Proudly brought to you by: V2

INCLUDED

• 1 x Wireless headphones
• 1 x USB Charging cable
• 1 x 3.5mm Audio cable
• 1 x Carry case with carabiner

SPECIFICATIONS

• On-board controls
• Pivoting earcups
• Bluetooth® version: 5.3
• Wireless range: 10m
• Driver size: 40mm
• Impedance: 32 Ohm
• Sensitivity: 100dB ± 3dB
• Frequency response: 20Hz – 20kHz
• Microphone: Built-in
• Play time: Up to 12 hours
• Charging time: Approx 2.5 hours
• Battery capacity: 200mAh
• Input voltage: 5V
• USB Charging cable

OVERVIEW

1. Volume +, next track
2. Power ON/OFF, pause/play, call/answer
3. Volume –, previous track
4. LED Indicator
5. Microphone
6. 3.5mm Audio port
7. USB-C Charge port

Bluetooth Pairing

1. Press and hold the power button (2) to put headphones into pairing mode. The LED Indicator (4) will alternate between red and blue lights.
2. Go to your Bluetooth® settings on your device. Find and select the model number “HPK14068”.
3. Once your device is paired with your headphones, the LED Indicator (4) will display blue light only.
4. The headphones will automatically connect to the same Bluetooth® device when switched on again.
5. If you want to pair a new device to the headphone, press and hold the power button (2) until the LED Indicator (4) alternates between blue and red lights. Note this will take longer than the first-time pairing. Approximately 5 seconds.

How to Use

1. Power on: Press and hold the power button (2).

2. Power off: Press and hold the power button (2).

3. Answer an incoming call: Press the power button (2) once.

4. Reject an incoming call: Press and hold the power button (2).

5. Redial the last number: Double tap the power button (2).

6. Volume +, next track: Tap volume button (1) quickly for next track. Press and hold to increase volume.

7. Volume –, previous track: Tap volume button (3) quickly for previous track. Press and hold to decrease volume.

8. Play/pause: Tap the power button (2) to play or pause audio.

9. To charge the headphones, plug the supplied USB-C Charging cable into the USB-C Charge port (7).
   It will take approximately 2.5 hours to fully charge.
   Only charge your device with a 5V/1A adaptor. Using other adaptors may either damage the battery or not charge.

10. For wired connection, use the supplied 3.5mm Audio cable and plug into 3.5mm Audio port (6).

CAUTION

• Do not put the headphones in a damp, dusty, smoky or steamy environment, or expose to sunlight for extended periods, do not leave in a vehicle for extended time either as it may cause malfunction.
• Use a soft dry cloth to clean the headphones, do not rub harshly or it may scratch the paint.
• Do not put the headphones in water, they are not waterproof. Continuous use at full output may damage hearing.
• Please charge headphones with supplied adaptive USB cable, charging with a fast charge cable may cause damage to the battery.

WARNING: Do not dispose of the unit in fire or water.

• Never attempt to disassemble and reassemble
• Waste electrical products should not be disposed of with household waste, please recycle where facilities exist.
• Check with your local authority for recycle advice.
• Keep your device and all accessories out of reach of children and animals
• Small parts may cause choking or serious injury if swallowed.
• Avoid exposing your device to very cold or very hot temperatures (below 0°C or above 45°C).
• Extreme temperatures can cause deforming of the device and reduce the charging capacity and life of your device.
• Do not allow your device to get wet – liquids can cause serious damage.
• Do not handle your device with wet hands.

Customer Support
1800 812 261
www.crest.com.au
AUSTRALIAN OWNED

References

• The Crest Company - Enhancing Digital Lifestyle

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>