TurboAnt X7 Pro – Folding Electric Scooter User Manual

X7 Pro Folding Electric Scooter User Manual

Email: support@turboant.com
Website: www.turboant.com
Made in China

Thank you for purchasing this product. To avoid injury to the user and others, be sure to observe the following safety instructions and guidelines. Keep this information for future reference.

Introduction

Featuring l O” tubed pneumatic tires, this scooter gives you a smooth riding experience. Its powerful 350 watt motor and 36 V battery enable a speed of up to 20 mph with a range of up to 30 miles. The reinforced frame reliably supports a body weight of 44-275 lb.

Important Safety Instructions and Guidelines

Safety Checks

• Follow the left and right markings on the handlebars to ensure proper installation.
• Make sure that no parts are damaged or have been modified.
• Make sure that the stem has been secured properly.
• Make sure that the Hall cable under the brake lever is connected correctly and the brakes operate properly.
• Make sure that the tires are fully inflated.
• Make sure the battery is fully charged (the indicator light turns green).
• Test whether the scooter can be turned on/off.
• Make sure that the front and rear lights function properly in the dark.
• Children under 14 years old should be supervised by an adult.

Safety Guidelines

Package Contents

• 1 x Folding Electric Scooter
• 1 x Charging Adapter
• 1 x M6 Hexagon Wrench
• 1 x Valve Adapter
• 1 x User Manual
• 1 x Warranty Card

Technical Specifications

Notes

1. Max speed values stated in the user manual depend on the road conditions and the load. Values stated on the rating label are related to average conditions.
2. Mileage is tested under the following conditions: the scooter is driven with the second speed level, 41.8 V full power battery, a load of 165 lbs (75 kg), temperature of 77 °F (25 °C), humidity of 70%, gentle breeze, tire pressure of 34.8 psi (240 kPa), and flat, dry road conditions. Actual results may vary. If the load exceeds 220 lb (100 kg), the mileage and speed may be decreased, which can affect the riding experience.
3. Please drive safely within the maximum speed limit set by local traffic officials. Everyone should strictly abide by all traffic rules and regulations .

Battery Specifications

Charger Specifications

Product Overview

Controls Overview

Note: If there is no operation within 10 minutes, the LED display will automatically turn off with a “beep” sound.

Controls Description

Operating Instructions

Battery Maintenance

1. Only use the original battery pack. Misuse of other models or brands can cause safety issues.

2. Only use the original power adapter to avoid potential damage, electric shock, or fire.

3. Mishandling of used batteries can cause tremendous harm to the environment. To protect the natural environment, please follow local regulations to properly dispose of used batteries.

4. Do not place the battery in an environment where the ambient temperature is higher than 122 °F (50 °C) or lower than -4 °F (-20 °C) (e.g., do not leave the scooter or the battery pack in a car under direct sunlight for an extended time).

5. Do not leave the battery pack near a heat source, such as a stove, and do not throw the battery pack into fire. Doing so may result in overheating, explosion, or fire.

6. After every use, fully charge the battery to prolong its lifespan.

7. If the scooter is expected to be left unused for more than 30 days, please fully charge the battery and place it in a dry and cool place. Keep in mind to recharge the battery every 30 days to protect it from potential damage, which is beyond the coverage of our limited warranty. Always charge before exhausting the battery to prolong the battery’s lifespan.

8. The battery pack performs better within the normal temperature range of 32 to 95 °F
   (0 to 35 °C), and performs worse when below 32 °F (0 °C). For instance, when the temperature is below -4 °F (-20 °C), the actual mileage will only be half or less than listed. When the temperature rises, the mileage will restore. Note: A fully charged TurboAnt Electric Scooter will last for 120-180 days.

9. The built-in intelligent chip will keep a log of its charging and discharging records. The damage caused by prolonged periods without charging is irreversible and is beyond the coverage of our limited warranty. Once the damage is done, the battery cannot be recharged.

Riding the Scooter

1. Wear protective gear such as a helmet.
2. Hold the power button for 2 seconds to turn on the scooter.
3. Place the foot of your weaker leg on the middle of the deck.
4. Build up sufficient momentum with your stronger leg.
5. Place the toes of the other foot onto the rear of the deck and the heel onto the mudguard.
6. Gently press down the throttle to accelerate.
7. Step down onto the mudguard to break and assist the breaking by pressing the brake lever.

Battery Charging

Charging the Installed Battery

1. Remove the charging port cover at the bottom of the stem. Make sure the charging port is dry and free of dust.
2. Connect the charging adapter.
3. The battery is fully charged when the indicator light of the charging adapter turns from red to green.
4. Close the charging port cover after charging the battery.

Charging the Removed Battery

1. Remove the battery (Battery Removal).
2. Open the charging port cover at the bottom of the battery. Make sure the charging port is dry and free of dust.
3. Connect the charging adapter.
4. The battery is fully charged when the indicator light of the charging adapter turns from red to green.
5. Close the charging port cover after charging the battery.

Only use the original charging adapter to charge the scooter .

Maintenance

1. Make sure the scooter is turned off and the power adapter is disconnected.
2. Wipe clean the scooter with a damp cloth. Never use lubricating oil on the body and do not immerse it in water.

Storage

1. Fully charge the scooter before storage and month y to prevent a premature decay of the capacity.
2. Do not charge if the temperature is below 50 OF (10 oc).
3. Keep the scooter in a dry and ventilated area away from direct sun ight exposure, and protect it with a cover to protect it from dust.

General Troubleshooting and Solution Guide

Frequently Asked Questions (FAQs)

1. What is the optimum tire pressure when riding this scooter?
The recommended tire pressure is between 31.9-34.8 psi (220-240 kPa). Please pump up
the tires to this pressure.

2. The headlight cannot be turned on or is abnormally lit. How can I solve this problem?
If the headlight won’t turn on, please verify that the scooter is turned on. When the scooter is turned on, press the function button twice rapidly to see whether the headlight functions. Also, check to ensure that the lamp holder is not clogged with dust. If the lamp holder is not clogged with dust, and the headlight still will not turn on, it may need to be replaced. Please contact our customer support center for help.

3. What should I do if the scooter’s stem is swaying while riding the scooter?
Immediately stop riding the scooter. Verify that the screws that connect to the folding spanner and other screws on the stem are well tightened. If not, tighten the screws using the hexagonal wrench. Periodical y tightening the screws on the scooter may be necessary.

4. What should I do if the brakes are not functioning properly?
(1). Turn on the scooter. Don’t stand on the deck. Tilt the scooter to lift the front wheel.
Then, press down the throttle to accelerate, and the front wheel should start to rotate.
Next, hold the brake lever. If the front wheel stops rotating, the EBS (Electronic Braking System) is functioning properly. If the front wheel does not stop rotating, the Electronic Braking System may be faulty. Please contact our customer support center for help.
(2). Turn off the scooter, and tilt the scooter so that the rear wheel can rotate. Then, hold the brake lever. If the rear wheel stops rotating and there is no grinding noise, the disc brake is functioning proper y. If there is a grinding noise on the brake, the disc brake may be faulty. Please contact our customer support center for help.

5. The battery is not charging. What’s the problem?
Verify that the charging adapter is in good condition. Plug the charging adapter into an AC power source without connecting to the scooter. If the indicator light turns on green, the charging adapter works normally. f the indicator ight does not turn on or is lit red, the charging adapter is faulty. If the battery still cannot be charged with a normal charging adapter, the battery may have an over-discharge. Please contact our customer support center for help.

6. Why can’t the throttle function properly, even when pressed down fully?
Make sure the scooter’s initial speed is above 1.9 mph (3 km/h). If the speed is not above I .9 mph (3 km/h), the scooter will not accelerate. f the scooter still cannot accelerate, please contact our customer support center for help.

7. Can I replace the tires on my own if I have a flat tire?
If you have a flat tire, please contact our customer support center for help and repair. It is not easy to replace on your own, and faulty installation may damage other parts of the scooter, which can nullify our limited warranty. Seek help via our customer support center or take the scooter to an automobile or motorbike repair center and ask the professionals for assistance.

8. Why does the battery life decrease over time?
The lithium-ion battery will naturally degrade its maximum capacity after 500 charge/ discharge cycles. The battery performs better when within the normal temperature range of 32 to 95 OF (O to 35 oc) and performs worse when below 32 OF (O oc). For instance, when the temperature is below -4 OF (-20 oc), the actual mileage will only be half or less than listed.

9. Why has my motor suddenly stopped working?
The reason may be that the controller has malfunctioned, which may require a new replacement. Please contact our customer support center for help and repair.

10. When I press down the throttle, why doesn’t the motor function properly?
It could be that there is a Hall wire malfunction with the Electronic Braking System.
Please check to see if the wire terminals of the brake lever and the LED panel are loose, and whether the brake lever has been damaged.

11. Why can’t my mileage reach 30 miles?
The max listed mileage is 30 miles, which is measured under the following conditions: the scooter is driven with the second speed level, 41.8 V full power battery, a load of 1 65 1b (75 kg), temperature of 77 OF (25 oc), humidity of 70%, gentle wind, tire pressure of 34.8 psi (240 kPa), and flat, dry road conditions. Please note that the tire is a type of tubed pneumatic tire, so fully inflating the tires can help extend your mileage.

Environmental Protection

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>