Kensington UH1450P USB-C Mobile Dock Instruction Manual
- June 12, 2024
- Kensington
Table of Contents
Kensington UH1450P USB-C Mobile Dock
UH1450P USB-C Mobile Dock
Register your dock at kensington.com/register
WHAT IS IN THE BOX
INSTALLATION INSTRUCTION
- Plug the USB-C cable into an available USB-C port on your host device. The selected USB-C port should support both Alt Mode and Power Delivery.
- Connect accessories and monitors:
- Connect phones, mice, keyboards, thumb drives, printers, and hard drives using the two USB-A 3.2 Gen2 ports (10Gbps/5V/1.5A and 10Gbps/5V/0.9A) on the back of the dock.
- Plug your ethernet cable into the 1Gbps Ethernet port for stable high-speed internet/intranet connectivity.
- Connect monitors using the two DisplayPort 1.4++ ports on the front of the dock.
- Connect an additional USB-C accessory using the USB-C 3.2 Gen2 port (10Gbps/5V/0.9A) located on the front of the dock.
- To setup pass-through power:
- Plug your host device’s USB-C power adapter into the USB-C PD port on the side of the dock.
- The USB-C power adapter must supply at least 85W of Power Delivery.
- The dock will deliver:
- Up to Dual or Single 4K @ 60Hz on Windows devices
- Up to Dual 4K @ 60 Hz on macOS devices in mirror mode only
Note: Host must support DP 1.4 for maximum resolutions.
Windows
macOS
- Minimum of 85W PD required from your USB-C power adapter.
For support, visit kensington.com/support
www.kensington.com/support
Kensington® is a registered trademark of ACCO Brands. All other trademarks
are the property of their respective owners. Patents:
https://www.accobrands.com/patents/
02023 Kensington Computer Products Group, a division of ACCO Brands.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>